app For Kenworth T680 T880 Peterbilt 579 13-18 Engine Coolant Reservoir Tank w/ Cap
app For Kenworth T680 T880 Peterbilt 579 13-18 Engine Coolant Reservoir Tank w/ Cap
app For Kenworth T680 T880 Peterbilt 579 13-18 Engine Coolant Reservoir Tank w/ Cap
- Combination wrench set and extensions
- Coolant collection pan
- Flat head screwdriver
- Funnel
- Locking pliers
- New coolant
- Replacement coolant reservoir and clips
- Safety equipment including safety glasses and gloves
- Socket wrench set
- WD-40 or other penetrating oil
- Work light
- Note: The replacement coolant reservoir will vary according to different makes and models.
|
|
|
|
|
|
|
|
|
|
For Kenworth T680 T880 Peterbilt 579 13-18 Engine Coolant Reservoir Tank w/ Cap
How to Replace a Coolant Reservoir
Materials Needed
- Combination wrench set and extensions
- Coolant collection pan
- Flat head screwdriver
- Funnel
- Locking pliers
- New coolant
- Replacement coolant reservoir and clips
- Safety equipment including safety glasses and gloves
- Socket wrench set
- WD-40 or other penetrating oil
-
Work light
-
Note: The replacement coolant reservoir will vary according to different makes and models.
-
Tip: Anytime you work on the coolant system, the potential of being burned is very high. Coolant can maintain a temperature near boiling for a very long time and will burn your skin if exposed. This job should only be completed when the engine is cold and has not been running for a minimum of one hour. Make sure you wear safety glasses and gloves to protect your hands from hot coolant if the engine is not cold.
Part 1 of 3: Diagnosing a problem with the coolant reservoir
Noted below are a few of the warning signs that will alert you that the coolant reservoir is damaged and needs to be replaced.
Coolant is leaking under the motor: If you notice that there is coolant or what appears to be colored water under your vehicle, specifically under the passenger side engine compartment, this could be an indication that the coolant reservoir is damaged.
Low coolant or engine overheating: When the radiator coolant level is actually low, air pockets may develop inside the coolant lines. This will typically create an overheating situation. In many cases, the low level of coolant is due to evaporation or a leak in the system. Check the radiator and coolant lines to verify they are not the cause of the leak before you replace the coolant reservoir.
Part 2 of 3: Remove and replace the coolant reservoir
Step 1: Prepare the vehicle. The coolant reservoir is located on top of the engine compartment, and in some cases, may be tucked below.
Step 2: Spray WD-40 on any rusted bolts. There are only a few bolts that secure the coolant reservoir to the engine compartment.
Step 3: Locate the coolant reservoir. The coolant reservoir should be located on the top of the engine compartment, typically on the passenger side.
Step 4: Remove the bolts securing the reservoir to the engine compartment. On most US and foreign vehicles, there will be one or two bolts on the front of the reservoir that attacing it.
Step 5: Remove the two top hoses. There are two hoses on top of the coolant reservoir that need to be removed next.
Step 6: Pry the hoses off the reservoir tank fittings. Once the clamps have been moved back onto the hose, you'll need to use a very thin, flat head screwdriver to pry the hose clamps off the fitting.
Step 7: Remove the bottom coolant hose. On the bottom of the tank , there is a larger circumference coolant hose that runs to the radiator.
Step 8: Pry the hose off the bottom fitting. Do this as instructed above with top fitting.
Step 9: Remove rear clip from coolant reservoir. On most coolant reservoirs, there will be a clip that secures the reservoir to the rear of the engine compartment.
Step 10: Remove the old coolant reservoir from the engine compartment.
Step 11: Clean the area underneath the old coolant reservoir. Since the old reservoir is gone, this is a good opportunity to clean any coolant, debris, dirt or gunk that may be under that area.
Step 12: Reinstall the new tank. Before you reinstall the new coolant reservoir, make sure to visually verify that the new tank is the same shape, size, and has the same fittings as the older tank.
Step 13: Attach bottom hose to coolant reservoir. The bottom hose needs to be installed before trying to secure the tank to the engine compartment.
Step 14: Slide clamps onto the hose and fitting. Using a pair of pliers, close the teeth of the clamp and slide the clamp to the base of the tank and release the pliers to close the clamp securely.
Step 15: Reattach two top hoses. Utilizing the same process as indicated in step 11 and 12, secure the left and right top hoses to the new coolant reservoir.
Step 16: Snap new tank onto rear clamp fitting. This step is for those that have a reservoir tank that has a clamp attachment as displayed in the image above.
Step 17: Secure coolant reservoir. Secure with bolts to the engine compartment.
Step 18: Fill coolant reservoir. Each manufacturer has individual recommendations on the type of coolant that should be used as well as how high to fill the reservoir.
Step 19: Check with manufacturer about priming coolant system. In some cases, your vehicles coolant system will need to be primed to avoid bubbles or air pockets inside the coolant lines. Make sure to check with your vehicle manufacturer if this is the case and prime the system as recommended before starting the vehicle.
Part 3 of 3: Test drive the vehicle
Step 1: Start the vehicle. Let it warm up to operating temperature.
Step 2: Check for any leaks. Look for leaks from the coolant reservoir or coolant lines attached.
Step 3: Check to see if the check engine or low coolant level light is illuminated. If it is, turn off the engine and check the coolant level inside the reservoir.
Step 4: Make sure to drive the vehicle until you hear the radiator fan come on. Once you do, return home while keeping an eye on the thermostat or engine temperature.
Step 5: Check coolant level. Once the vehicle has cooled for a minimum of one hour, check the coolant level inside the reservoir and fill if needed.
| Item Specifics | |
|---|---|
| Brand : | app |
| Type : | Coolant Expansion Tank |
| Packaging Type : | Box |
| Manufacturer Part Number : | APP151877S01 |
| OE/OEM Part Number : | ?DR104002 |
| Fitment Type : | Direct Replacement |
| Material : | Plastic |
| Color : | White |
| Manufacturer Warranty : | 1 Year |
| Model : | T680, T880, 579 |
| Package Quantity : | 1 |
| Interchange Part Number : | CP237001, DR104004 |
| Condition : | New |
| Items Included : | w/ Cap; w/ Sensor |
| Compatible Makes : | Kenworth, Peterbilt |
| Placement on Vehicle : | Front |
| Weight : | 11.8 LB |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
1.We only accept PayPal.
2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
4.Payment must be received within 10 days as auction ended or order might be delayed.1.We only accept PayPal.
2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
4.Payment must be received within 10 days as auction ended or order might be delayed.1.We only accept PayPal.
2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
4.Payment must be received within 10 days as auction ended or order might be delayed.1.We only accept PayPal.
2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
4.Payment must be received within 10 days as auction ended or order might be delayed.1.We only accept PayPal.
2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
4.Payment must be received within 10 days as auction ended or order might be delayed.1.We only accept PayPal.
2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
4.Payment must be received within 10 days as auction ended or order might be delayed.
1. Orders processed within 24 hours of payment verification.
2. We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.
3. The images shown are not the actual item and are for your reference only.
4. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
1. You have 30 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!
2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.
4. Return shipping is to be paid by the Buyer.
We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
For Kenworth T680 T880 Peterbilt 579 13-18 Engine Coolant Reservoir Tank w/ Cap
How to Replace a Coolant Reservoir
Materials Needed
Part 1 of 3: Diagnosing a problem with the coolant reservoir
Noted below are a few of the warning signs that will alert you that the coolant reservoir is damaged and needs to be replaced.
Coolant is leaking under the motor: If you notice that there is coolant or what appears to be colored water under your vehicle, specifically under the passenger side engine compartment, this could be an indication that the coolant reservoir is damaged.
Low coolant or engine overheating: When the radiator coolant level is actually low, air pockets may develop inside the coolant lines. This will typically create an overheating situation. In many cases, the low level of coolant is due to evaporation or a leak in the system. Check the radiator and coolant lines to verify they are not the cause of the leak before you replace the coolant reservoir.
Part 2 of 3: Remove and replace the coolant reservoir
Step 1: Prepare the vehicle. The coolant reservoir is located on top of the engine compartment, and in some cases, may be tucked below. Step 2: Spray WD-40 on any rusted bolts. There are only a few bolts that secure the coolant reservoir to the engine compartment.
Step 3: Locate the coolant reservoir. The coolant reservoir should be located on the top of the engine compartment, typically on the passenger side. Step 4: Remove the bolts securing the reservoir to the engine compartment. On most US and foreign vehicles, there will be one or two bolts on the front of the reservoir that attacing it.
Step 5: Remove the two top hoses. There are two hoses on top of the coolant reservoir that need to be removed next. Step 6: Pry the hoses off the reservoir tank fittings. Once the clamps have been moved back onto the hose, you'll need to use a very thin, flat head screwdriver to pry the hose clamps off the fitting.
Step 7: Remove the bottom coolant hose. On the bottom of the tank , there is a larger circumference coolant hose that runs to the radiator.
Step 8: Pry the hose off the bottom fitting. Do this as instructed above with top fitting. Step 9: Remove rear clip from coolant reservoir. On most coolant reservoirs, there will be a clip that secures the reservoir to the rear of the engine compartment. Step 10: Remove the old coolant reservoir from the engine compartment. Step 11: Clean the area underneath the old coolant reservoir. Since the old reservoir is gone, this is a good opportunity to clean any coolant, debris, dirt or gunk that may be under that area.
Step 12: Reinstall the new tank. Before you reinstall the new coolant reservoir, make sure to visually verify that the new tank is the same shape, size, and has the same fittings as the older tank.
Step 13: Attach bottom hose to coolant reservoir. The bottom hose needs to be installed before trying to secure the tank to the engine compartment. Step 14: Slide clamps onto the hose and fitting. Using a pair of pliers, close the teeth of the clamp and slide the clamp to the base of the tank and release the pliers to close the clamp securely. Step 15: Reattach two top hoses. Utilizing the same process as indicated in step 11 and 12, secure the left and right top hoses to the new coolant reservoir. Step 16: Snap new tank onto rear clamp fitting. This step is for those that have a reservoir tank that has a clamp attachment as displayed in the image above. Step 17: Secure coolant reservoir. Secure with bolts to the engine compartment.
Step 18: Fill coolant reservoir. Each manufacturer has individual recommendations on the type of coolant that should be used as well as how high to fill the reservoir. Step 19: Check with manufacturer about priming coolant system. In some cases, your vehicles coolant system will need to be primed to avoid bubbles or air pockets inside the coolant lines. Make sure to check with your vehicle manufacturer if this is the case and prime the system as recommended before starting the vehicle.
Part 3 of 3: Test drive the vehicle Step 1: Start the vehicle. Let it warm up to operating temperature. Step 2: Check for any leaks. Look for leaks from the coolant reservoir or coolant lines attached. Step 3: Check to see if the check engine or low coolant level light is illuminated. If it is, turn off the engine and check the coolant level inside the reservoir. Step 4: Make sure to drive the vehicle until you hear the radiator fan come on. Once you do, return home while keeping an eye on the thermostat or engine temperature. Step 5: Check coolant level. Once the vehicle has cooled for a minimum of one hour, check the coolant level inside the reservoir and fill if needed.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
1.We only accept PayPal.
2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
4.Payment must be received within 10 days as auction ended or order might be delayed.1.We only accept PayPal.
2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages. 3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.) 4.Payment must be received within 10 days as auction ended or order might be delayed.1.We only accept PayPal. 2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages. 3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.) 4.Payment must be received within 10 days as auction ended or order might be delayed.1.We only accept PayPal. 2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
4.Payment must be received within 10 days as auction ended or order might be delayed.
1. Orders processed within 24 hours of payment verification. 1. You have 30 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS! 2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable. We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns. Copyright of app_autoparts. All rights reserved. |
Shop Category Picture Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us |
|||||||||||||||||||||||||||||||||||||||||||||
| Brand: | app |
|---|---|
| Isin: | IXSYIMNWXQJP |
This product is not available in the selected country
In Stock
Backordered
Out of Stock
IBspot Buyer Protection
Shop confidently on IBspot, receive your item as described or your money back for eligible orders. Learn Program Terms
GUARANTEED SAFE CHECKOUT
-
MONEY BACK GUARANTEE
30 days money back guarantee, no additional fee charged.
-
EXCELLENT SUPPORT
We provide 24/7 online customer support via email.
-
Fast Shipping
One week domestic shipping. Global delivery to the US in 2 weeks.
- Combination wrench set and extensions
- Coolant collection pan
- Flat head screwdriver
- Funnel
- Locking pliers
- New coolant
- Replacement coolant reservoir and clips
- Safety equipment including safety glasses and gloves
- Socket wrench set
- WD-40 or other penetrating oil
- Work light
- Note: The replacement coolant reservoir will vary according to different makes and models.
|
|
|
|
|
|
|
|
For Kenworth T680 T880 Peterbilt 579 13-18 Engine Coolant Reservoir Tank w/ Cap
How to Replace a Coolant Reservoir
Materials Needed
- Combination wrench set and extensions
- Coolant collection pan
- Flat head screwdriver
- Funnel
- Locking pliers
- New coolant
- Replacement coolant reservoir and clips
- Safety equipment including safety glasses and gloves
- Socket wrench set
- WD-40 or other penetrating oil
-
Work light
-
Note: The replacement coolant reservoir will vary according to different makes and models.
-
Tip: Anytime you work on the coolant system, the potential of being burned is very high. Coolant can maintain a temperature near boiling for a very long time and will burn your skin if exposed. This job should only be completed when the engine is cold and has not been running for a minimum of one hour. Make sure you wear safety glasses and gloves to protect your hands from hot coolant if the engine is not cold.
Part 1 of 3: Diagnosing a problem with the coolant reservoir
Noted below are a few of the warning signs that will alert you that the coolant reservoir is damaged and needs to be replaced.
Coolant is leaking under the motor: If you notice that there is coolant or what appears to be colored water under your vehicle, specifically under the passenger side engine compartment, this could be an indication that the coolant reservoir is damaged.
Low coolant or engine overheating: When the radiator coolant level is actually low, air pockets may develop inside the coolant lines. This will typically create an overheating situation. In many cases, the low level of coolant is due to evaporation or a leak in the system. Check the radiator and coolant lines to verify they are not the cause of the leak before you replace the coolant reservoir.
Part 2 of 3: Remove and replace the coolant reservoir
Step 1: Prepare the vehicle. The coolant reservoir is located on top of the engine compartment, and in some cases, may be tucked below.
Step 2: Spray WD-40 on any rusted bolts. There are only a few bolts that secure the coolant reservoir to the engine compartment.
Step 3: Locate the coolant reservoir. The coolant reservoir should be located on the top of the engine compartment, typically on the passenger side.
Step 4: Remove the bolts securing the reservoir to the engine compartment. On most US and foreign vehicles, there will be one or two bolts on the front of the reservoir that attacing it.
Step 5: Remove the two top hoses. There are two hoses on top of the coolant reservoir that need to be removed next.
Step 6: Pry the hoses off the reservoir tank fittings. Once the clamps have been moved back onto the hose, you'll need to use a very thin, flat head screwdriver to pry the hose clamps off the fitting.
Step 7: Remove the bottom coolant hose. On the bottom of the tank , there is a larger circumference coolant hose that runs to the radiator.
Step 8: Pry the hose off the bottom fitting. Do this as instructed above with top fitting.
Step 9: Remove rear clip from coolant reservoir. On most coolant reservoirs, there will be a clip that secures the reservoir to the rear of the engine compartment.
Step 10: Remove the old coolant reservoir from the engine compartment.
Step 11: Clean the area underneath the old coolant reservoir. Since the old reservoir is gone, this is a good opportunity to clean any coolant, debris, dirt or gunk that may be under that area.
Step 12: Reinstall the new tank. Before you reinstall the new coolant reservoir, make sure to visually verify that the new tank is the same shape, size, and has the same fittings as the older tank.
Step 13: Attach bottom hose to coolant reservoir. The bottom hose needs to be installed before trying to secure the tank to the engine compartment.
Step 14: Slide clamps onto the hose and fitting. Using a pair of pliers, close the teeth of the clamp and slide the clamp to the base of the tank and release the pliers to close the clamp securely.
Step 15: Reattach two top hoses. Utilizing the same process as indicated in step 11 and 12, secure the left and right top hoses to the new coolant reservoir.
Step 16: Snap new tank onto rear clamp fitting. This step is for those that have a reservoir tank that has a clamp attachment as displayed in the image above.
Step 17: Secure coolant reservoir. Secure with bolts to the engine compartment.
Step 18: Fill coolant reservoir. Each manufacturer has individual recommendations on the type of coolant that should be used as well as how high to fill the reservoir.
Step 19: Check with manufacturer about priming coolant system. In some cases, your vehicles coolant system will need to be primed to avoid bubbles or air pockets inside the coolant lines. Make sure to check with your vehicle manufacturer if this is the case and prime the system as recommended before starting the vehicle.
Part 3 of 3: Test drive the vehicle
Step 1: Start the vehicle. Let it warm up to operating temperature.
Step 2: Check for any leaks. Look for leaks from the coolant reservoir or coolant lines attached.
Step 3: Check to see if the check engine or low coolant level light is illuminated. If it is, turn off the engine and check the coolant level inside the reservoir.
Step 4: Make sure to drive the vehicle until you hear the radiator fan come on. Once you do, return home while keeping an eye on the thermostat or engine temperature.
Step 5: Check coolant level. Once the vehicle has cooled for a minimum of one hour, check the coolant level inside the reservoir and fill if needed.
| Item Specifics | |
|---|---|
| Brand : | app |
| Type : | Coolant Expansion Tank |
| Packaging Type : | Box |
| Manufacturer Part Number : | APP151877S01 |
| OE/OEM Part Number : | ?DR104002 |
| Fitment Type : | Direct Replacement |
| Material : | Plastic |
| Color : | White |
| Manufacturer Warranty : | 1 Year |
| Model : | T680, T880, 579 |
| Package Quantity : | 1 |
| Interchange Part Number : | CP237001, DR104004 |
| Condition : | New |
| Items Included : | w/ Cap; w/ Sensor |
| Compatible Makes : | Kenworth, Peterbilt |
| Placement on Vehicle : | Front |
| Weight : | 11.8 LB |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
1.We only accept PayPal.
2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
4.Payment must be received within 10 days as auction ended or order might be delayed.1.We only accept PayPal.
2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
4.Payment must be received within 10 days as auction ended or order might be delayed.1.We only accept PayPal.
2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
4.Payment must be received within 10 days as auction ended or order might be delayed.1.We only accept PayPal.
2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
4.Payment must be received within 10 days as auction ended or order might be delayed.1.We only accept PayPal.
2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
4.Payment must be received within 10 days as auction ended or order might be delayed.1.We only accept PayPal.
2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
4.Payment must be received within 10 days as auction ended or order might be delayed.
1. Orders processed within 24 hours of payment verification.
2. We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.
3. The images shown are not the actual item and are for your reference only.
4. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
1. You have 30 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!
2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.
4. Return shipping is to be paid by the Buyer.
We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
For Kenworth T680 T880 Peterbilt 579 13-18 Engine Coolant Reservoir Tank w/ Cap
How to Replace a Coolant Reservoir
Materials Needed
Part 1 of 3: Diagnosing a problem with the coolant reservoir
Noted below are a few of the warning signs that will alert you that the coolant reservoir is damaged and needs to be replaced.
Coolant is leaking under the motor: If you notice that there is coolant or what appears to be colored water under your vehicle, specifically under the passenger side engine compartment, this could be an indication that the coolant reservoir is damaged.
Low coolant or engine overheating: When the radiator coolant level is actually low, air pockets may develop inside the coolant lines. This will typically create an overheating situation. In many cases, the low level of coolant is due to evaporation or a leak in the system. Check the radiator and coolant lines to verify they are not the cause of the leak before you replace the coolant reservoir.
Part 2 of 3: Remove and replace the coolant reservoir
Step 1: Prepare the vehicle. The coolant reservoir is located on top of the engine compartment, and in some cases, may be tucked below. Step 2: Spray WD-40 on any rusted bolts. There are only a few bolts that secure the coolant reservoir to the engine compartment.
Step 3: Locate the coolant reservoir. The coolant reservoir should be located on the top of the engine compartment, typically on the passenger side. Step 4: Remove the bolts securing the reservoir to the engine compartment. On most US and foreign vehicles, there will be one or two bolts on the front of the reservoir that attacing it.
Step 5: Remove the two top hoses. There are two hoses on top of the coolant reservoir that need to be removed next. Step 6: Pry the hoses off the reservoir tank fittings. Once the clamps have been moved back onto the hose, you'll need to use a very thin, flat head screwdriver to pry the hose clamps off the fitting.
Step 7: Remove the bottom coolant hose. On the bottom of the tank , there is a larger circumference coolant hose that runs to the radiator.
Step 8: Pry the hose off the bottom fitting. Do this as instructed above with top fitting. Step 9: Remove rear clip from coolant reservoir. On most coolant reservoirs, there will be a clip that secures the reservoir to the rear of the engine compartment. Step 10: Remove the old coolant reservoir from the engine compartment. Step 11: Clean the area underneath the old coolant reservoir. Since the old reservoir is gone, this is a good opportunity to clean any coolant, debris, dirt or gunk that may be under that area.
Step 12: Reinstall the new tank. Before you reinstall the new coolant reservoir, make sure to visually verify that the new tank is the same shape, size, and has the same fittings as the older tank.
Step 13: Attach bottom hose to coolant reservoir. The bottom hose needs to be installed before trying to secure the tank to the engine compartment. Step 14: Slide clamps onto the hose and fitting. Using a pair of pliers, close the teeth of the clamp and slide the clamp to the base of the tank and release the pliers to close the clamp securely. Step 15: Reattach two top hoses. Utilizing the same process as indicated in step 11 and 12, secure the left and right top hoses to the new coolant reservoir. Step 16: Snap new tank onto rear clamp fitting. This step is for those that have a reservoir tank that has a clamp attachment as displayed in the image above. Step 17: Secure coolant reservoir. Secure with bolts to the engine compartment.
Step 18: Fill coolant reservoir. Each manufacturer has individual recommendations on the type of coolant that should be used as well as how high to fill the reservoir. Step 19: Check with manufacturer about priming coolant system. In some cases, your vehicles coolant system will need to be primed to avoid bubbles or air pockets inside the coolant lines. Make sure to check with your vehicle manufacturer if this is the case and prime the system as recommended before starting the vehicle.
Part 3 of 3: Test drive the vehicle Step 1: Start the vehicle. Let it warm up to operating temperature. Step 2: Check for any leaks. Look for leaks from the coolant reservoir or coolant lines attached. Step 3: Check to see if the check engine or low coolant level light is illuminated. If it is, turn off the engine and check the coolant level inside the reservoir. Step 4: Make sure to drive the vehicle until you hear the radiator fan come on. Once you do, return home while keeping an eye on the thermostat or engine temperature. Step 5: Check coolant level. Once the vehicle has cooled for a minimum of one hour, check the coolant level inside the reservoir and fill if needed.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
1.We only accept PayPal.
2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
4.Payment must be received within 10 days as auction ended or order might be delayed.1.We only accept PayPal.
2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages. 3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.) 4.Payment must be received within 10 days as auction ended or order might be delayed.1.We only accept PayPal. 2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages. 3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.) 4.Payment must be received within 10 days as auction ended or order might be delayed.1.We only accept PayPal. 2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
4.Payment must be received within 10 days as auction ended or order might be delayed.
2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
Copyright of app_autoparts. All rights reserved. |
Shop Category Hot Item
Picture
New List Item
Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
- UPC: Does not apply
- Brand: app
- Type: Coolant Expansion Tank
- Packaging Type: Box
- Manufacturer Part Number: APP151877S01
- OE/OEM Part Number: ?DR104002
- Fitment Type: Direct Replacement
- Material: Plastic
- Color: White
- Manufacturer Warranty: 1 Year
- Model: T680, T880, 579
- Package Quantity: 1
- Interchange Part Number: CP237001, DR104004
- Items Included: w/ Cap; w/ Sensor
- Compatible Makes: Kenworth, Peterbilt
- Placement on Vehicle: Front
Shipping Summary:
- Packages are shipped from Monday to Friday.
- The usual time for processing an order is 1 to 3 business days, but may vary depending on the availability of products ordered. This period excludes delivery times, which depend on your geographic location.
- We provide tracking for every order. Tracking will be available once your product is shipped. Each individual product may be shipped from different fulfillment centers across the globe as our product research team spends the time to source quality yet affordable products.
Estimated delivery times:
- Standard Shipping: 3-7 business days
- Expedited Shipping: 2-5 business days
- International Shipping: 10 - 15 business days
Please note that these are estimates, not guarantees. Delivery time depends on a number of variables, and there may be delays such as bad weather affecting air transport, or a package being held for inspection by Customs. ibspot is not liable for any delays in international transportation or customs clearance.
Shipments can be delivered directly to most addresses, except post office boxes. However, in certain remote areas, there may be an additional delivery charge or you may need to pick up your package from the closest service location of ibspot's shipping partner.
Shipping Status:
As soon as your order ships, you'll receive a shipping confirmation email that includes your tracking number.
If you don't receive a shipping confirmation email right away, don't worry! We know the delivery date or date range provided at checkout and we'll be sure to deliver the items within that timeframe.
Order changes:
Please contact our customer support if the order needs to be canceled or modified.
Item not received:
If you've successfully placed an order and haven't received it yet while the tracking status shows it's delivered. you'd wish to contact the carrier to hunt the packages. Once a package is marked “Delivered” by the carrier, we are no longer responsible for lost or stolen items. Please ensure you provide a secure delivery address.
Damaged Parcel
If your package has been delivered in a PO Box, please note that we are not responsible for any damage that may result (consequences of extreme temperatures, theft, etc.).
If you have any questions regarding shipping or want to know about the status of an order, please contact us or email to support@ibspot.com.
Please Read Our Return & Refund Policy Carefully:
Return:
You may return most items within 30 days of delivery for a full refund.
To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.
Several types of goods are exempt from being returned. Perishable goods such as food, flowers, newspapers or magazines cannot be returned. We also do not accept products that are intimate or sanitary goods, hazardous materials, or flammable liquids or gases.
Additional non-returnable items:
- Gift cards
- Downloadable software products
- Some health and personal care items
To complete your return, we require a tracking number, which shows the items which you already returned to us.
There are certain situations where only partial refunds are granted (if applicable)
- Book with obvious signs of use
- CD, DVD, VHS tape, software, video game, cassette tape, or vinyl record that has been opened
- Any item not in its original condition, is damaged or missing parts for reasons not due to our error
- Any item that is returned more than 30 days after delivery
Items returned to us as a result of our error will receive a full refund,some returns may be subject to a restocking fee of 7% of the total item price, please contact a customer care team member to see if your return is subject. Returns that arrived on time and were as described are subject to a restocking fee.
Items returned to us that were not the result of our error, including items returned to us due to an invalid or incomplete address, will be refunded the original item price less our standard restocking fees.
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, please Contact Us with your order number and details about the product you would like to return. We will respond quickly with instructions for how to return items from your order.
Shipping Cost
We'll pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.). In other cases, you will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
Depending on where you live, the time it may take for your exchanged product to reach you, may vary.
If you are shipping an item over $75, you should consider using a trackable shipping service or purchasing shipping insurance. We don’t guarantee that we will receive your returned item.
Refund:
- Purchases may be returned within 30 days of the shipping date for a refund.
- Refund will be issued to your original form of payment.
- Refunds for orders purchased with IBSPOT Gift Cards and/or IBSPOT Notes will be issued as a IBSPOT Gift Card and mailed to the original billing address. Gift cards cannot be redeemed for cash unless required by law.
Refund Processing
• Returns to a IBSPOT store will be refunded to the original form of payment or gift card. • Mail-in returns with our prepaid return label will be refunded back to the original form of payment within 3-5 business days after we receive your return. Please allow 5-7 business days for your return to arrive at our Returns Center.
• Note: It may take a few days until your bank posts the refund to your account.
Claims:
Claims related to the product. Be sure to check the details of your purchase carefully before you make the payment, and check the contents of the package(s) promptly upon receipt. If you have a problem with the product, visit our Support Center to find out about return shipping arrangements.
WHICH CIRCUMSTANCES WE OFFER RETURND & REFUND:
WRONG PRODUCT:
If you discover your order is flawed please contact us Mail: support@ibspot.com. With photos of the wrong product we will providing a return shipping label. Once it is tracking we will ship a replacement a product immediately.
Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.
Exceptions / non-returnable items
Certain types of items cannot be returned, like perishable goods (such as food, flowers, or plants), custom products (such as special orders or personalized items), and personal care goods (such as beauty products). We also do not accept returns for hazardous materials, flammable liquids, or gases. Please get in touch if you have questions or concerns about your specific item. Unfortunately, we cannot accept returns on sale items or gift cards.
Exchanges
The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.
Oops!
Sorry, it looks like some products are not available in selected quantity.
