Skip to main content

Auto Engine Parts For 2008-2012 Honda Accord 3.5L Automatic Trans Front Left & Right 2pcs CV Axles

  • I installed a replacement CV drive axle and now my ABS light is on and won't go out. Why?
  • When the replacement drive axle was installed, the sensor ring, sensor, or sensor wiring on or near the axle was damaged, causing an erratic speed signal to the ABS module and setting the light on.
  •  
  • When I cut the wheel hard and step on the gas, I hear loud clicking and snapping. What's making that noise?
  • The most likely cause is a defective or worn outer CV drive axle joint. It may be time to get it replaced.
  •  
  • When I step on the gas, I hear a loud thump and feel a bad vibration. What's wrong?
  • For 2008-2012 Honda Accord 3.5L Automatic Trans Front Left & Right 2pcs CV Axles

    I installed a replacement CV drive axle and now my ABS light is on and won't go out. Why?

    When the replacement drive axle was installed, the sensor ring, sensor, or sensor wiring on or near the axle was damaged, causing an erratic speed signal to the ABS module and setting the light on.

     

    When I cut the wheel hard and step on the gas, I hear loud clicking and snapping. What's making that noise?

    The most likely cause is a defective or worn outer CV drive axle joint. It may be time to get it replaced.

     

    When I step on the gas, I hear a loud thump and feel a bad vibration. What's wrong?

    The most likely cause is the drive train shifting in the chassis due to a broken engine mount or hardware, causing misalignment of the CV drive axle and causing the inner joint to bind or hang up.

     

    I hear a grinding noise from the front end while driving and see grease on the chassis and suspension. What is causing this?

    The most likely problem is the outer CV drive axle boot has ruptured, causing the grease to leak out, allowing contamination (water and dirt) to enter and damage the joint.

     

    I removed both CV drive axles at the same time and now I am having problems reinstalling them. What can I do?

    The transaxle gear alignment has been lost. On some vehicles it will be necessary to disassemble the transaxle to properly align the output gears. ALWAYS remove and install one CV drive axle at a time.

     

    The old CV Drive Axle has a locking style (prevailing torque) nut.  Should I reuse it?

    NO! A prevailing torque lock nut should never be reused. Always discard the old nut and install a new one.

     

    The CV Drive Axle outboard joint stub shaft is stuck in the hub assembly. What's the best way to remove it?

    Always use the proper press type tool to remove the old stub shaft. NEVER strike the outer joint stub shaft with a hammer. It will damage the unit and possibly do damage to the hub bearing assembly.

     

    Is it OK to use an impact hammer to install the retaining nut?

    Never use an impact wrench to install the retaining nut on the CV Drive Axle. Always use a torque wrench and torque the nut to manufacture's specifications.

     

    When I replace the CV drive axles, should I reuse the old seals?

    When replacing CV Drive Axle assemblies, always install new transaxle seals to avoid leaking.

     

    Can I let the CV Drive Axles hang while I am working on the car?

    Never allow the CV Drive Axles to hang unsupported. This can lead to axle separation and damage to the inner joint.

     

    The wheels wobble when I make a turn. What's the problem?

    The most likely cause is a broken bearing cage due to excessive torque load.  This is typically an outboard joint problem.


    Item Specifics
    Brand :Auto Engine Parts
    Manufacturer Part Number :AE84543101P
    Interchange Part Number :66-4254, 66-4255
    OE/OEM Part Number :44306TA1A00, 44305TA1A00
    Superseded Part Number :60-4254, 664254, 604254, 60-4255, 664255, 604255
    Manufacturer Warranty :1 Year
    Fitment Type :Direct Replacement
    Compatible Makes :Honda
    Model :Accord
    Year :2008-2012
    Engine :V6 3.5L
    Location :Front Side(Front Driver & Passenger Side)
    Note :Fit V6 3.5L & Automatic Trans. only
    Note-2 :Fit Models with J35Z2 Engine
    California Prop 65 Warning :Yes

    Payment

    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

     

    • Instant Paypal payment is the preferred method of payment.
    • We will only ship to the confirmed Paypal shipping address given with the payment.
    • We do not offer local pickups.
    Shipping

    1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)

    2. We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.

    3. The images shown are not the actual item and are for your reference only.

    4. Fast shipping:All our packages use USPS Package Service

    5. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

    Returns

    1. You have 7 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!

    2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.

    3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.

    4. Return shipping is to be paid by the Buyer.

    Contact Us
    • We are always been trying to provide best service and reliable products for every customer.
    • If you are satisfed with the product you recieved,please leave us positive feedback.
    • If you are not satisfied for any reason, please do not be quick to leave negative or neutral feedback.We will work hard to make sure every customer 100 percent satisfied, and reslove any problem for you.
    Shop Category
    Picture

    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    For 2008-2012 Honda Accord 3.5L Automatic Trans Front Left & Right 2pcs CV Axles

    I installed a replacement CV drive axle and now my ABS light is on and won't go out. Why?

    When the replacement drive axle was installed, the sensor ring, sensor, or sensor wiring on or near the axle was damaged, causing an erratic speed signal to the ABS module and setting the light on.

     

    When I cut the wheel hard and step on the gas, I hear loud clicking and snapping. What's making that noise?

    The most likely cause is a defective or worn outer CV drive axle joint. It may be time to get it replaced.

     

    When I step on the gas, I hear a loud thump and feel a bad vibration. What's wrong?

    The most likely cause is the drive train shifting in the chassis due to a broken engine mount or hardware, causing misalignment of the CV drive axle and causing the inner joint to bind or hang up.

     

    I hear a grinding noise from the front end while driving and see grease on the chassis and suspension. What is causing this?

    The most likely problem is the outer CV drive axle boot has ruptured, causing the grease to leak out, allowing contamination (water and dirt) to enter and damage the joint.

     

    I removed both CV drive axles at the same time and now I am having problems reinstalling them. What can I do?

    The transaxle gear alignment has been lost. On some vehicles it will be necessary to disassemble the transaxle to properly align the output gears. ALWAYS remove and install one CV drive axle at a time.

     

    The old CV Drive Axle has a locking style (prevailing torque) nut.  Should I reuse it?

    NO! A prevailing torque lock nut should never be reused. Always discard the old nut and install a new one.

     

    The CV Drive Axle outboard joint stub shaft is stuck in the hub assembly. What's the best way to remove it?

    Always use the proper press type tool to remove the old stub shaft. NEVER strike the outer joint stub shaft with a hammer. It will damage the unit and possibly do damage to the hub bearing assembly.

     

    Is it OK to use an impact hammer to install the retaining nut?

    Never use an impact wrench to install the retaining nut on the CV Drive Axle. Always use a torque wrench and torque the nut to manufacture's specifications.

     

    When I replace the CV drive axles, should I reuse the old seals?

    When replacing CV Drive Axle assemblies, always install new transaxle seals to avoid leaking.

     

    Can I let the CV Drive Axles hang while I am working on the car?

    Never allow the CV Drive Axles to hang unsupported. This can lead to axle separation and damage to the inner joint.

     

    The wheels wobble when I make a turn. What's the problem?

    The most likely cause is a broken bearing cage due to excessive torque load.  This is typically an outboard joint problem.

    Item Specifics
    Brand :Auto Engine Parts
    Manufacturer Part Number :AE84543101P
    Interchange Part Number :66-4254, 66-4255
    OE/OEM Part Number :44306TA1A00, 44305TA1A00
    Superseded Part Number :60-4254, 664254, 604254, 60-4255, 664255, 604255
    Manufacturer Warranty :1 Year
    Fitment Type :Direct Replacement
    Compatible Makes :Honda
    Model :Accord
    Year :2008-2012
    Engine :V6 3.5L
    Location :Front Side(Front Driver & Passenger Side)
    Note :Fit V6 3.5L & Automatic Trans. only
    Note-2 :Fit Models with J35Z2 Engine
    California Prop 65 Warning :Yes


    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

     

    • Instant Paypal payment is the preferred method of payment.
    • We will only ship to the confirmed Paypal shipping address given with the payment.
    • We do not offer local pickups.

    1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)

    2. We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.

    3. The images shown are not the actual item and are for your reference only.

    4. Fast shipping:All our packages use USPS Package Service

    5. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

    1. You have 7 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!

    2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.

    3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.

    4. Return shipping is to be paid by the Buyer.

    • We are always been trying to provide best service and reliable products for every customer.
    • If you are satisfed with the product you recieved,please leave us positive feedback.
    • If you are not satisfied for any reason, please do not be quick to leave negative or neutral feedback.We will work hard to make sure every customer 100 percent satisfied, and reslove any problem for you.

    Copyright of Auto_EngineParts. All rights reserved.







    Brand: Auto Engine Parts
    Isin: ICIVOX7DCFDM

    $263.53

    $266.05
    1% off
    • Free shipping in US
    • Arrives:

    • Free 30-Day returns

    In Stock

    Sold by , Fulfilled By IBSPOT
    Ships from USA

    IBspot Buyer Protection

    Shop confidently on IBspot, receive your item as described or your money back for eligible orders. Learn Program Terms

    supported payment methods:Visa, Mastercard, Discover, Amex, Apple Pay, Google Pay

    GUARANTEED SAFE CHECKOUT

    More seller options

    Starting from

    Compare all sellers
    • MONEY BACK GUARANTEE

      30 days money back guarantee, no additional fee charged.

    • EXCELLENT SUPPORT

      We provide 24/7 online customer support via email.

    • Fast Shipping

      One week domestic shipping. Global delivery to the US in 2 weeks.

    scroll to top arrow
    Auto Engine Parts For 2008-2012 Honda Accord 3.5L Automatic Trans Front Left & Right 2pcs CV Axles

    Auto Engine Parts For 2008-2012 Honda Accord 3.5L Automatic Trans Front Left ...

    $263.53 $266.05 (1% off)

  • I installed a replacement CV drive axle and now my ABS light is on and won't go out. Why?
  • When the replacement drive axle was installed, the sensor ring, sensor, or sensor wiring on or near the axle was damaged, causing an erratic speed signal to the ABS module and setting the light on.
  •  
  • When I cut the wheel hard and step on the gas, I hear loud clicking and snapping. What's making that noise?
  • The most likely cause is a defective or worn outer CV drive axle joint. It may be time to get it replaced.
  •  
  • When I step on the gas, I hear a loud thump and feel a bad vibration. What's wrong?
  • For 2008-2012 Honda Accord 3.5L Automatic Trans Front Left & Right 2pcs CV Axles

    I installed a replacement CV drive axle and now my ABS light is on and won't go out. Why?

    When the replacement drive axle was installed, the sensor ring, sensor, or sensor wiring on or near the axle was damaged, causing an erratic speed signal to the ABS module and setting the light on.

     

    When I cut the wheel hard and step on the gas, I hear loud clicking and snapping. What's making that noise?

    The most likely cause is a defective or worn outer CV drive axle joint. It may be time to get it replaced.

     

    When I step on the gas, I hear a loud thump and feel a bad vibration. What's wrong?

    The most likely cause is the drive train shifting in the chassis due to a broken engine mount or hardware, causing misalignment of the CV drive axle and causing the inner joint to bind or hang up.

     

    I hear a grinding noise from the front end while driving and see grease on the chassis and suspension. What is causing this?

    The most likely problem is the outer CV drive axle boot has ruptured, causing the grease to leak out, allowing contamination (water and dirt) to enter and damage the joint.

     

    I removed both CV drive axles at the same time and now I am having problems reinstalling them. What can I do?

    The transaxle gear alignment has been lost. On some vehicles it will be necessary to disassemble the transaxle to properly align the output gears. ALWAYS remove and install one CV drive axle at a time.

     

    The old CV Drive Axle has a locking style (prevailing torque) nut.  Should I reuse it?

    NO! A prevailing torque lock nut should never be reused. Always discard the old nut and install a new one.

     

    The CV Drive Axle outboard joint stub shaft is stuck in the hub assembly. What's the best way to remove it?

    Always use the proper press type tool to remove the old stub shaft. NEVER strike the outer joint stub shaft with a hammer. It will damage the unit and possibly do damage to the hub bearing assembly.

     

    Is it OK to use an impact hammer to install the retaining nut?

    Never use an impact wrench to install the retaining nut on the CV Drive Axle. Always use a torque wrench and torque the nut to manufacture's specifications.

     

    When I replace the CV drive axles, should I reuse the old seals?

    When replacing CV Drive Axle assemblies, always install new transaxle seals to avoid leaking.

     

    Can I let the CV Drive Axles hang while I am working on the car?

    Never allow the CV Drive Axles to hang unsupported. This can lead to axle separation and damage to the inner joint.

     

    The wheels wobble when I make a turn. What's the problem?

    The most likely cause is a broken bearing cage due to excessive torque load.  This is typically an outboard joint problem.


    Item Specifics
    Brand :Auto Engine Parts
    Manufacturer Part Number :AE84543101P
    Interchange Part Number :66-4254, 66-4255
    OE/OEM Part Number :44306TA1A00, 44305TA1A00
    Superseded Part Number :60-4254, 664254, 604254, 60-4255, 664255, 604255
    Manufacturer Warranty :1 Year
    Fitment Type :Direct Replacement
    Compatible Makes :Honda
    Model :Accord
    Year :2008-2012
    Engine :V6 3.5L
    Location :Front Side(Front Driver & Passenger Side)
    Note :Fit V6 3.5L & Automatic Trans. only
    Note-2 :Fit Models with J35Z2 Engine
    California Prop 65 Warning :Yes

    Payment

    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

     

    • Instant Paypal payment is the preferred method of payment.
    • We will only ship to the confirmed Paypal shipping address given with the payment.
    • We do not offer local pickups.
    Shipping

    1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)

    2. We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.

    3. The images shown are not the actual item and are for your reference only.

    4. Fast shipping:All our packages use USPS Package Service

    5. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

    Returns

    1. You have 7 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!

    2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.

    3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.

    4. Return shipping is to be paid by the Buyer.

    Contact Us
    • We are always been trying to provide best service and reliable products for every customer.
    • If you are satisfed with the product you recieved,please leave us positive feedback.
    • If you are not satisfied for any reason, please do not be quick to leave negative or neutral feedback.We will work hard to make sure every customer 100 percent satisfied, and reslove any problem for you.
    Shop Category
    Picture

    content_src_url

    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    For 2008-2012 Honda Accord 3.5L Automatic Trans Front Left & Right 2pcs CV Axles

    I installed a replacement CV drive axle and now my ABS light is on and won't go out. Why?

    When the replacement drive axle was installed, the sensor ring, sensor, or sensor wiring on or near the axle was damaged, causing an erratic speed signal to the ABS module and setting the light on.

     

    When I cut the wheel hard and step on the gas, I hear loud clicking and snapping. What's making that noise?

    The most likely cause is a defective or worn outer CV drive axle joint. It may be time to get it replaced.

     

    When I step on the gas, I hear a loud thump and feel a bad vibration. What's wrong?

    The most likely cause is the drive train shifting in the chassis due to a broken engine mount or hardware, causing misalignment of the CV drive axle and causing the inner joint to bind or hang up.

     

    I hear a grinding noise from the front end while driving and see grease on the chassis and suspension. What is causing this?

    The most likely problem is the outer CV drive axle boot has ruptured, causing the grease to leak out, allowing contamination (water and dirt) to enter and damage the joint.

     

    I removed both CV drive axles at the same time and now I am having problems reinstalling them. What can I do?

    The transaxle gear alignment has been lost. On some vehicles it will be necessary to disassemble the transaxle to properly align the output gears. ALWAYS remove and install one CV drive axle at a time.

     

    The old CV Drive Axle has a locking style (prevailing torque) nut.  Should I reuse it?

    NO! A prevailing torque lock nut should never be reused. Always discard the old nut and install a new one.

     

    The CV Drive Axle outboard joint stub shaft is stuck in the hub assembly. What's the best way to remove it?

    Always use the proper press type tool to remove the old stub shaft. NEVER strike the outer joint stub shaft with a hammer. It will damage the unit and possibly do damage to the hub bearing assembly.

     

    Is it OK to use an impact hammer to install the retaining nut?

    Never use an impact wrench to install the retaining nut on the CV Drive Axle. Always use a torque wrench and torque the nut to manufacture's specifications.

     

    When I replace the CV drive axles, should I reuse the old seals?

    When replacing CV Drive Axle assemblies, always install new transaxle seals to avoid leaking.

     

    Can I let the CV Drive Axles hang while I am working on the car?

    Never allow the CV Drive Axles to hang unsupported. This can lead to axle separation and damage to the inner joint.

     

    The wheels wobble when I make a turn. What's the problem?

    The most likely cause is a broken bearing cage due to excessive torque load.  This is typically an outboard joint problem.

    Item Specifics
    Brand :Auto Engine Parts
    Manufacturer Part Number :AE84543101P
    Interchange Part Number :66-4254, 66-4255
    OE/OEM Part Number :44306TA1A00, 44305TA1A00
    Superseded Part Number :60-4254, 664254, 604254, 60-4255, 664255, 604255
    Manufacturer Warranty :1 Year
    Fitment Type :Direct Replacement
    Compatible Makes :Honda
    Model :Accord
    Year :2008-2012
    Engine :V6 3.5L
    Location :Front Side(Front Driver & Passenger Side)
    Note :Fit V6 3.5L & Automatic Trans. only
    Note-2 :Fit Models with J35Z2 Engine
    California Prop 65 Warning :Yes


    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

     

    • Instant Paypal payment is the preferred method of payment.
    • We will only ship to the confirmed Paypal shipping address given with the payment.
    • We do not offer local pickups.

    1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)

    2. We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.

    3. The images shown are not the actual item and are for your reference only.

    4. Fast shipping:All our packages use USPS Package Service

    5. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

    1. You have 7 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!

    2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.

    3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.

    4. Return shipping is to be paid by the Buyer.

    • We are always been trying to provide best service and reliable products for every customer.
    • If you are satisfed with the product you recieved,please leave us positive feedback.
    • If you are not satisfied for any reason, please do not be quick to leave negative or neutral feedback.We will work hard to make sure every customer 100 percent satisfied, and reslove any problem for you.

    Copyright of Auto_EngineParts. All rights reserved.







    • Brand: Auto Engine Parts
    • Manufacturer Part Number: AE84543101P
    • Interchange Part Number: 66-4254, 66-4255
    • OE/OEM Part Number: 44306TA1A00, 44305TA1A00
    • Superseded Part Number: 60-4254, 664254, 604254, 60-4255, 664255, 604255
    • Manufacturer Warranty: 1 Year
    • Fitment Type: Direct Replacement
    • Compatible Makes: Honda
    • Model: Accord
    • Year: 2008-2012
    • Engine: V6 3.5L
    • Location: Front Side(Front Driver & Passenger Side)
    • Note: Fit V6 3.5L & Automatic Trans. only
    • Note-2: Fit Models with J35Z2 Engine
    • UPC: Does not apply

    Shipping Summary:

    • Packages are shipped from Monday to Friday.
    • The usual time for processing an order is 1 to 3 business days, but may vary depending on the availability of products ordered. This period excludes delivery times, which depend on your geographic location.
    • We provide tracking for every order. Tracking will be available once your product is shipped. Each individual product may be shipped from different fulfillment centers across the globe as our product research team spends the time to source quality yet affordable products. 

    Estimated delivery times:

    • Standard Shipping: 3-7 business days
    • Expedited Shipping: 2-5 business days
    • International Shipping: 10 - 15 business days

    Please note that these are estimates, not guarantees. Delivery time depends on a number of variables, and there may be delays such as bad weather affecting air transport, or a package being held for inspection by Customs. ibspot is not liable for any delays in international transportation or customs clearance.

    Shipments can be delivered directly to most addresses, except post office boxes. However, in certain remote areas, there may be an additional delivery charge or you may need to pick up your package from the closest service location of ibspot's shipping partner.

    Shipping Status: 

    As soon as your order ships, you'll receive a shipping confirmation email that includes your tracking number. 

    If you don't receive a shipping confirmation email right away, don't worry! We know the delivery date or date range provided at checkout and we'll be sure to deliver the items within that timeframe.

    Order changes: 

    Please contact our customer support if the order needs to be canceled or modified.

    Item not received: 

    If you've successfully placed an order and haven't received it yet while the tracking status shows it's delivered. you'd wish to contact the carrier to hunt out your Cover as once the item is Covered we  have control over it (once it’s by the carrier), but if still persists kindly email us 

    Damaged Parcel
    If your package has been delivered in a PO Box, please note that we are not responsible for any damage that may result (consequences of extreme temperatures, theft, etc.). 

    If you have any questions regarding shipping or want to know about the status of an order, please contact us or email to support@ibspot.com.

     

    Please Read Our Return & Refund Policy Carefully: 

    Return: 

    You may return most items within 30 days of delivery for a full refund.

    To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.

    Several types of goods are exempt from being returned. Perishable goods such as food, flowers, newspapers or magazines cannot be returned. We also do not accept products that are intimate or sanitary goods, hazardous materials, or flammable liquids or gases.

    Additional non-returnable items:

    • Gift cards
    • Downloadable software products
    • Some health and personal care items

    To complete your return, we require a tracking number, which shows the items which you already returned to us.
    There are certain situations where only partial refunds are granted (if applicable)

    • Book with obvious signs of use
    • CD, DVD, VHS tape, software, video game, cassette tape, or vinyl record that has been opened
    • Any item not in its original condition, is damaged or missing parts for reasons not due to our error
    • Any item that is returned more than 30 days after delivery

    Items returned to us as a result of our error will receive a full refund,some returns may be subject to a restocking fee of 7% of the total item price, please contact a customer care team member to see if your return is subject. Returns that arrived on time and were as described are subject to a restocking fee.

    Items returned to us that were not the result of our error, including items returned to us due to an invalid or incomplete address, will be refunded the original item price less our standard restocking fees.

    You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).

    If you need to return an item, please Contact Us with your order number and details about the product you would like to return. We will respond quickly with instructions for how to return items from your order.


    Shipping Cost

    We'll pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.). In other cases, you will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.

    Depending on where you live, the time it may take for your exchanged product to reach you, may vary.

    If you are shipping an item over $75, you should consider using a trackable shipping service or purchasing shipping insurance. We don’t guarantee that we will receive your returned item.

    Refund: 

    • Purchases may be returned within 30 days of the shipping date for a refund. 
    • Refund will be issued to your original form of payment.
    • Refunds for orders purchased with IBSPOT Gift Cards and/or IBSPOT Notes will be issued as a  IBSPOT Gift Card and mailed to the original billing address. Gift cards cannot be redeemed for cash unless  required by law. 

    Refund Processing 

    • Returns to a IBSPOT store will be refunded to the original form of payment or gift card. • Mail-in returns with our prepaid return label will be refunded back to the original form of payment within 3-5  business days after we receive your return. Please allow 5-7 business days for your return to arrive at our Returns Center. 

    • Note: It may take a few days until your bank posts the refund to your account. 

    Claims: 

    Claims related to the product. Be sure to check the details of your purchase carefully before you make the payment, and  check the contents of the package(s) promptly upon receipt. If you have a problem with the product, visit our Support  Center to find out about return shipping arrangements. 

    WHICH CIRCUMSTANCES WE OFFER RETURND & REFUND: 

    WRONG PRODUCT: 

    If you discover your order is flawed please contact us Mail: support@ibspot.com. With photos of the wrong product we will providing a return shipping label. Once it is tracking we will ship a replacement a product immediately. 

    Damages and issues 

    Please inspect your order upon reception and contact us immediately if the item is defective,  damaged or if you receive the wrong item, so that we can evaluate the issue and make it right. 

    Exceptions / non-returnable items 

    Certain types of items cannot be returned, like perishable goods (such as food, flowers, or plants),  custom products (such as special orders or personalized items), and personal care goods (such as  beauty products). We also do not accept returns for hazardous materials, flammable liquids, or  gases. Please get in touch if you have questions or concerns about your specific item. Unfortunately, we cannot accept returns on sale items or gift cards. 

    Exchanges 

    The fastest way to ensure you get what you want is to return the item you have, and once the return  is accepted, make a separate purchase for the new item. 

    Oops!

    Sorry, it looks like some products are not available in selected quantity.

    OK

    delivery truck
    Fast Delivery

    Global delivery to the US in just days—fast, reliable, and hassle-free service every time!

    safe payment
    Safe Payment

    Pay with the world’s most popular and secure payment methods.

    headphone
    24/7 Help Center

    Round-the-clock assistance for a smooth shopping experience.

    mail return
    100% Satisfaction Guarantee

    30 days return policy if you’re not satisfied with products & services

    Subscribe To Our Newsletter

    Statements on this website have not been evaluated by the Food and Drug Administration. Products are not intended to diagnose, treat, cure or prevent any disease.