BluDento B2 True Hi-Fi aptX HD LDAC Bluetooth Music Receiver v5.1 ESS DAC
BluDento B2 True Hi-Fi aptX HD LDAC Bluetooth Music Receiver v5.1 ESS DAC
BluDento B2 True Hi-Fi aptX HD LDAC Bluetooth Music Receiver v5.1 ESS DAC
BluDento are able to change the “BLUETOOTH ID” for pairing instead of the default "B2" ID. However you will have to leave us a note when ordering.
Key Features:
- Use this HD Bluetooth music receiver instead of buying a brand new Bluetooth sound bar; turn your older stereo into a nifty Bluetooth capable one
- CIRRUS LOGIC CS8406: CIRRUS LOGIC digital conversion chip for high-quality digital output
- Sound quality with aptX HD though better than from SBC codec so aptX HD Bluetooth is far superior to standard Bluetooth
- Setup is extremely easy. Once plugged in, the device automatically makes itself available to be paired. No password or key required
- Compatible with all DSPs, standalone DACs, amplifiers, preamplifiers, power amplifier, A/V receiver and PA speakers
- This one offer THREE useful outputs – analogue RCA (instead of lower quality headphone jack), digital optical and digital coaxial - all work in parallel so one Bluetooth input can be distributed to three amps/DACs at the same time
- The use of a dedicated digital-analogue-converter ESS ES9108K2M (instead of the cheap integrated DAC of the Bluetooth chipset) enables audiophile grade sound output at the analog RCA jacks
- aptX Low Latency codec ensuring synchronized audio during video playback
- Auto-reconnect to last paired device during power-up, remembers up to 5 devices at once
- It runs stone cold, not surprising since Bluetooth uses very much less power than Wi-Fi
- Bluetooth Version: 5.1;
- Bluetooth Profiles: A2DP, EDR
- LDAC,aptX HD, aptX Low Latency, aptX Classic, MP3, AAC, SBC, WAV, FLAC and DSD audio codecs;
- Built-In DAC: ESS ES9018K2M PCM interface: 32bit, 384kHz(Max);
- CIRRUS LOGIC digital conversion chip for high-quality digital output: CIRRUS LOGIC CS8406;
- Supports 48kHz / 24bit LPCM audio data;
- DAC SNR(Typ): 127dB;
- ReceiverSensitivity (basic rate, typical): – 90dBm;
- Audio Input: Bluetooth ONLY;
- Audio Outputs: Analog Stereo RCA, Digital TOSLINK Optical and SPDIF Coaxial;
- Power Input: Type C USB
- Power Supply: DC 5V 0.5A-3A USB power adapter required (NOT INCLUDED)
Q&A:
Is the Bluetooth always on when the unit is powered on, or does it go to sleep? and are all 3 outputs active at the same time?
Yes, always ON, no sleeping mode;
Yes it works. You get output from analog, SPDIF and TOSLINK at the same time.
Is this version also a Bluetooth Audio Transmitter?
This is simply a Bluetooth receiver!
Can you rename the BT device? I want to connect several of these to a multi-zone whole house audio amp & want to know to which zone I am sending.
Yes, we are able to customize the “BLUETOOTH ID” for pairing instead of the default "B2" ID. What is more, we can set different passcode for every BluDento device. The passcode of BluDento device is set to 0000 (four zero) by default. You have to leave us a note when adding the order to the cart.
Can you have two identical HIFI Bluetooth music audio receivers in one household ?
Yes, but ideally they should have different Bluetooth IDs. BluDento are able to customize the “BLUETOOTH ID” for pairing instead of the default "B2" ID. You have to leave us a note when adding the order to the cart.
If you use the optical out, does it bypass the DAC?
Yes, digital outputs: Optical & Coaxial bypass the on-board DAC.
Do you have a comparison of your BLT-HD version vs B2 version? What are the primary differences?
Both B2 and BLT-HD are AAC, SBC, aptX, aptX LL, aptX,HD LDAC supported;
B2 is with an OLED display but BLT-HD NOT;
B2 is with a button called "MFB": SHORT PRESS to TURN ON/OFF Display ONLY; LONG PRESS to DISABLE current Bluetooth connection.
What is the max VRMS level of the L & R channels outputs?
2.12V at 50HZ at 0dB.
Does the power supply adapter come in the box? If not how do I get it?
No, Any 5V USB charger it's fine.
How many A (amps) minimum does the USB power adapter need to be for this unit?
Min 0.5A.
How many Bluetooth devices can simultaneously stream to this device?
Only one.
How many source devices can be connected at the same time?
Two.
I have multiple phones/tablets/laptops. I can't tell which is currently connected to the device. How can I force-pair the one I have in my hand?
Long Press the button of "MFB" then try to search and connect B2 again.
Does it have a on/off button or auto-on when power is connected? and will it remember the connected device when it comes back on after power was cut?
Auto on after power on; long press MFB button to disable current Bluetooth connection; short press to turn ON/OFF display; Yes it searches for previously paired Bluetooth devices when powered up.
| Brand: | BluDento |
|---|---|
| Isin: | IXCYLJGUJNXS |
Out of Stock
In Stock
Backordered
Out of Stock
IBspot Buyer Protection
Shop confidently on IBspot, receive your item as described or your money back for eligible orders. Learn Program Terms
GUARANTEED SAFE CHECKOUT
-
MONEY BACK GUARANTEE
30 days money back guarantee, no additional fee charged.
-
EXCELLENT SUPPORT
We provide 24/7 online customer support via email.
-
Fast Shipping
One week domestic shipping. Global delivery to the US in 2 weeks.
BluDento are able to change the “BLUETOOTH ID” for pairing instead of the default "B2" ID. However you will have to leave us a note when ordering.
Key Features:
- Use this HD Bluetooth music receiver instead of buying a brand new Bluetooth sound bar; turn your older stereo into a nifty Bluetooth capable one
- CIRRUS LOGIC CS8406: CIRRUS LOGIC digital conversion chip for high-quality digital output
- Sound quality with aptX HD though better than from SBC codec so aptX HD Bluetooth is far superior to standard Bluetooth
- Setup is extremely easy. Once plugged in, the device automatically makes itself available to be paired. No password or key required
- Compatible with all DSPs, standalone DACs, amplifiers, preamplifiers, power amplifier, A/V receiver and PA speakers
- This one offer THREE useful outputs – analogue RCA (instead of lower quality headphone jack), digital optical and digital coaxial - all work in parallel so one Bluetooth input can be distributed to three amps/DACs at the same time
- The use of a dedicated digital-analogue-converter ESS ES9108K2M (instead of the cheap integrated DAC of the Bluetooth chipset) enables audiophile grade sound output at the analog RCA jacks
- aptX Low Latency codec ensuring synchronized audio during video playback
- Auto-reconnect to last paired device during power-up, remembers up to 5 devices at once
- It runs stone cold, not surprising since Bluetooth uses very much less power than Wi-Fi
- Bluetooth Version: 5.1;
- Bluetooth Profiles: A2DP, EDR
- LDAC,aptX HD, aptX Low Latency, aptX Classic, MP3, AAC, SBC, WAV, FLAC and DSD audio codecs;
- Built-In DAC: ESS ES9018K2M PCM interface: 32bit, 384kHz(Max);
- CIRRUS LOGIC digital conversion chip for high-quality digital output: CIRRUS LOGIC CS8406;
- Supports 48kHz / 24bit LPCM audio data;
- DAC SNR(Typ): 127dB;
- ReceiverSensitivity (basic rate, typical): – 90dBm;
- Audio Input: Bluetooth ONLY;
- Audio Outputs: Analog Stereo RCA, Digital TOSLINK Optical and SPDIF Coaxial;
- Power Input: Type C USB
- Power Supply: DC 5V 0.5A-3A USB power adapter required (NOT INCLUDED)
Q&A:
Is the Bluetooth always on when the unit is powered on, or does it go to sleep? and are all 3 outputs active at the same time?
Yes, always ON, no sleeping mode;
Yes it works. You get output from analog, SPDIF and TOSLINK at the same time.
Is this version also a Bluetooth Audio Transmitter?
This is simply a Bluetooth receiver!
Can you rename the BT device? I want to connect several of these to a multi-zone whole house audio amp & want to know to which zone I am sending.
Yes, we are able to customize the “BLUETOOTH ID” for pairing instead of the default "B2" ID. What is more, we can set different passcode for every BluDento device. The passcode of BluDento device is set to 0000 (four zero) by default. You have to leave us a note when adding the order to the cart.
Can you have two identical HIFI Bluetooth music audio receivers in one household ?
Yes, but ideally they should have different Bluetooth IDs. BluDento are able to customize the “BLUETOOTH ID” for pairing instead of the default "B2" ID. You have to leave us a note when adding the order to the cart.
If you use the optical out, does it bypass the DAC?
Yes, digital outputs: Optical & Coaxial bypass the on-board DAC.
Do you have a comparison of your BLT-HD version vs B2 version? What are the primary differences?
Both B2 and BLT-HD are AAC, SBC, aptX, aptX LL, aptX,HD LDAC supported;
B2 is with an OLED display but BLT-HD NOT;
B2 is with a button called "MFB": SHORT PRESS to TURN ON/OFF Display ONLY; LONG PRESS to DISABLE current Bluetooth connection.
What is the max VRMS level of the L & R channels outputs?
2.12V at 50HZ at 0dB.
Does the power supply adapter come in the box? If not how do I get it?
No, Any 5V USB charger it's fine.
How many A (amps) minimum does the USB power adapter need to be for this unit?
Min 0.5A.
How many Bluetooth devices can simultaneously stream to this device?
Only one.
How many source devices can be connected at the same time?
Two.
I have multiple phones/tablets/laptops. I can't tell which is currently connected to the device. How can I force-pair the one I have in my hand?
Long Press the button of "MFB" then try to search and connect B2 again.
Does it have a on/off button or auto-on when power is connected? and will it remember the connected device when it comes back on after power was cut?
Auto on after power on; long press MFB button to disable current Bluetooth connection; short press to turn ON/OFF display; Yes it searches for previously paired Bluetooth devices when powered up.
Item Specifics
Processing Time
- We process and ship orders Monday through Friday, excluding holidays.
- Most orders are processed within 1–3 business days, depending on product availability.
- Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.
Shipping Coverage
We currently ship to addresses within the United States only.
Products may ship from:
- Our U.S. warehouses, or
- Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).
Each product page clearly displays the “Ships From” location before checkout.
Shipping Methods & Estimated Delivery
| Shipping Method | Estimated Delivery | Cost |
|---|---|---|
| Free Shipping (US) | 5–10 business days | Free, available on eligible items |
| Standard Shipping (US to US by Item) | 5–10 business days | $6.50 for the first item, $2.00 each additional |
| Standard Shipping (From US Warehouse by Weight) | 3–7 business days | Starts at $6.50, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb. |
| Extended Delivery (Ships from Overseas Warehouse) | 10–20 business days | $14.50 for the first item, $2.00 each additional |
Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.
Free Shipping
We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout.
Carriers
We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.
Import Duties & Taxes
All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.
Tracking & Notifications
Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.
You can track your shipment anytime using the Track Your Order page on our website.
Order Changes & Cancellations
If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.
Contact: support@ibspot.com
Item Not Received
If your tracking number shows “Delivered” but you haven’t received your package:
- Check with your local USPS or UPS office.
- Confirm that the shipping address provided was correct.
- If the issue remains unresolved, contact support@ibspot.com for assistance.
Damaged or Lost Parcels
If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.
Customer Support
For any questions about shipping, tracking, or delivery, our customer support team is here to help.
Email: support@ibspot.com
We’re always happy to help.
Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.
Order Cancellation Policy
Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.
How to Request a Cancellation
You can contact us through:
- Email: support@ibspot.com
- Contact Form: Submit a request through our Contact Us page
Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.
Return Policy
We accept returns for most items within 30 days of delivery for a full refund.
To be eligible for a return:
- The item must be unused, in the same condition as received, and in its original packaging.
- A tracking number must be provided to confirm the return shipment.
Non-Returnable Items
Certain products cannot be returned, including:
- Perishable goods (for example, food, flowers, newspapers, magazines)
- Intimate or sanitary goods
- Hazardous materials or flammable liquids/gases
- Gift cards
- Downloadable software
- Some health and personal care items
Partial Refunds (If Applicable)
Partial refunds may be granted in specific situations, such as:
- Books with obvious signs of use
- Opened CDs, DVDs, software, or vinyl records
- Items not in their original condition, damaged, or missing parts not due to our error
- Items returned more than 30 days after delivery
How to Return an Item
To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.
Shipping Cost for Returns
Please contact us before returning any item.
We will provide a free return shipping label.
If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.
For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.
Refund Processing
Once your return is received and inspected:
- In-store returns are refunded to the original form of payment or issued as a gift card.
- Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.
Please allow:
- 5–7 business days for the return to reach our Returns Center.
- An additional 3–10 business days for your bank to post the refund to your account.
Damages, Issues & Claims
Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.
Product Claims
Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.
Exchanges
We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.
Return Address
IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States
Customer Support
Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.
Email: support@ibspot.com
Contact Form: Contact Us page
Oops!
Sorry, it looks like some products are not available in selected quantity.