Cutting Edge Stencils 4-Inch Dense Foam Stencil Roller with Handle - Perfect for DIY Stenciling!
Cutting Edge Stencils 4-Inch Dense Foam Stencil Roller with Handle - Perfect for DIY Stenciling!
Cutting Edge Stencils 4-Inch Dense Foam Stencil Roller with Handle - Perfect for DIY Stenciling!
This is our favorite wall stenciling tool: Dense Foam Roller - the easiest and fastest way to apply stenciled image to a wall. Perfect for wall-art stencils, allover patterns, damask and scroll stencils, as well as faux frescoes and murals.
Use the same handle for 4" and 6" rollers. We suggest having a separate roller for each color for faster stenciling. You can certainly use the same roller for different colors, but it will need to be rinsed of paint and dried before applying new color. Residual water in your roller will create seepage under the stencil.
You can find 4" and 6" roller 2-pack replacements in the "Supplies" section of our store.
Here's how to use this foam roller with handle for wall stenciling:
1. First, pour some acrylic or latex paint on a foam plate or a paint tray. You don’t need much, about 3-4 tablespoons of paint is enough to start with.
2. Load your foam roller by rolling it over the paint few times until it absorbs most or all of it. There should be no visible paint on a roller surface, it should look almost dry.
3. Now blot off the excess paint on a folded paper towel by rolling it back and forth a couple times. Remember, it’s better to have less paint on your roller, than too much paint. OK, now you’re ready to stencil!
4. Place the stencil on your wall/ceiling/floor and tape it in place with few pieces of a blue painter's tape. Roll the stencil with your roller using light to medium pressure. Excessive pressure may cause paint bleeding under the stencil.
5. You can easily check how you’re doing by carefully un-taping and lifting one corner of the stencil and taking a peek. Do you like what you see? Is it enough pressure, or it can use a little more paint? If it’s too pale, just put the stencil back and roll it a couple more times back and forth, or slightly add more pressure. (When stenciling lighter colors over darker colors, you may need 2 coats to achieve good coverage. Let the 1st coat dry for a couple of minutes and then roll the stencil again.)
6. Re-load the roller with paint as necessary and continue stenciling until all stencil is covered evenly ( or unevenly, if you want the "broken" or faded look).
Now remove the stencil and enjoy your artwork!
Rollers can be rinsed, dried and used many times.
WE COMBINE SHIPPING! BUY MORE AND SAVE!
WE ONLY SHIP WITH PRIORITY MAIL TO ENSURE SPEEDY DELIVERY ON DOMESTIC AND INTERNATIONAL ORDERS.
ATTENTION INTERNATIONAL CUSTOMERS:
You order may be subject to import duties, custom tariffs or VAT charges. They vary greatly from country to country and we strongly suggest checking your country’s customs policy before placing your order with us. These charges are always the responsibility of the recipient.
If any package is refused or undeliverable, the original shipping cost is non-refundable.
THANK YOU AND PLEASE COME AGAIN SOON!
© Copyright 2008-12 Innovative Art Concepts, LLC. All rights reserved. Cutting Edge Stencils is a trademark of Innovative Art Concepts, LLC
Use the same handle for 4" and 6" rollers. We suggest having a separate roller for each color for faster stenciling. You can certainly use the same roller for different colors, but it will need to be rinsed of paint and dried before applying new color. Residual water in your roller will create seepage under the stencil.
You can find 4" and 6" roller 2-pack replacements in the "Supplies" section of our store.
Here's how to use this foam roller with handle for wall stenciling:
1. First, pour some acrylic or latex paint on a foam plate or a paint tray. You don’t need much, about 3-4 tablespoons of paint is enough to start with.
2. Load your foam roller by rolling it over the paint few times until it absorbs most or all of it. There should be no visible paint on a roller surface, it should look almost dry.
3. Now blot off the excess paint on a folded paper towel by rolling it back and forth a couple times. Remember, it’s better to have less paint on your roller, than too much paint. OK, now you’re ready to stencil!
4. Place the stencil on your wall/ceiling/floor and tape it in place with few pieces of a blue painter's tape. Roll the stencil with your roller using light to medium pressure. Excessive pressure may cause paint bleeding under the stencil.
5. You can easily check how you’re doing by carefully un-taping and lifting one corner of the stencil and taking a peek. Do you like what you see? Is it enough pressure, or it can use a little more paint? If it’s too pale, just put the stencil back and roll it a couple more times back and forth, or slightly add more pressure. (When stenciling lighter colors over darker colors, you may need 2 coats to achieve good coverage. Let the 1st coat dry for a couple of minutes and then roll the stencil again.)
6. Re-load the roller with paint as necessary and continue stenciling until all stencil is covered evenly ( or unevenly, if you want the "broken" or faded look).
Now remove the stencil and enjoy your artwork!
Rollers can be rinsed, dried and used many times.
To learn a simple stenciling technique, take a look at our our step-by-step stenciling VIDEOS on YouTube.
http://www.youtube.com/user/CuttingEdgeStencils
You'll find these short video tutorials extremely helpful for your stenciling project. Even beginners get great results!
Our professional decorative company, Specfin Designs, has been a leader in faux painting for over 20 years in NYC/NJ Metropolitan area. We have hundreds of original hand drawn designs that we have turned into well-engineered sturdy stencils that are easy and fun to use. For over 20 years we painted, faux finished, plastered and stenciled in hundreds of upscale homes in the New York metropolitan area as well as other states around the country. So when we say "We know decorative painting and stenciling" we really mean it :) You can see many beautiful examples of our work by visiting http://www.specfindesigns.com
YOU ARE WELCOME TO BROWSE OUR EXTENSIVE PORTFOLIO AND USE IT FOR YOUR INSPIRATION!WE COMBINE SHIPPING! BUY MORE AND SAVE!
WE ONLY SHIP WITH PRIORITY MAIL TO ENSURE SPEEDY DELIVERY ON DOMESTIC AND INTERNATIONAL ORDERS.
ATTENTION INTERNATIONAL CUSTOMERS:
You order may be subject to import duties, custom tariffs or VAT charges. They vary greatly from country to country and we strongly suggest checking your country’s customs policy before placing your order with us. These charges are always the responsibility of the recipient.
If any package is refused or undeliverable, the original shipping cost is non-refundable.
THANK YOU AND PLEASE COME AGAIN SOON!
© Copyright 2008-12 Innovative Art Concepts, LLC. All rights reserved. Cutting Edge Stencils is a trademark of Innovative Art Concepts, LLC
| Brand: | Cutting Edge Stencils |
|---|---|
| Isin: | IAAAL2Y7HRBR |
Out of Stock
In Stock
Backordered
Out of Stock
IBspot Buyer Protection
Shop confidently on IBspot, receive your item as described or your money back for eligible orders. Learn Program Terms
GUARANTEED SAFE CHECKOUT
-
MONEY BACK GUARANTEE
30 days money back guarantee, no additional fee charged.
-
EXCELLENT SUPPORT
We provide 24/7 online customer support via email.
-
Fast Shipping
One week domestic shipping. Global delivery to the US in 2 weeks.
This is our favorite wall stenciling tool: Dense Foam Roller - the easiest and fastest way to apply stenciled image to a wall. Perfect for wall-art stencils, allover patterns, damask and scroll stencils, as well as faux frescoes and murals.
Use the same handle for 4" and 6" rollers. We suggest having a separate roller for each color for faster stenciling. You can certainly use the same roller for different colors, but it will need to be rinsed of paint and dried before applying new color. Residual water in your roller will create seepage under the stencil.
You can find 4" and 6" roller 2-pack replacements in the "Supplies" section of our store.
Here's how to use this foam roller with handle for wall stenciling:
1. First, pour some acrylic or latex paint on a foam plate or a paint tray. You don’t need much, about 3-4 tablespoons of paint is enough to start with.
2. Load your foam roller by rolling it over the paint few times until it absorbs most or all of it. There should be no visible paint on a roller surface, it should look almost dry.
3. Now blot off the excess paint on a folded paper towel by rolling it back and forth a couple times. Remember, it’s better to have less paint on your roller, than too much paint. OK, now you’re ready to stencil!
4. Place the stencil on your wall/ceiling/floor and tape it in place with few pieces of a blue painter's tape. Roll the stencil with your roller using light to medium pressure. Excessive pressure may cause paint bleeding under the stencil.
5. You can easily check how you’re doing by carefully un-taping and lifting one corner of the stencil and taking a peek. Do you like what you see? Is it enough pressure, or it can use a little more paint? If it’s too pale, just put the stencil back and roll it a couple more times back and forth, or slightly add more pressure. (When stenciling lighter colors over darker colors, you may need 2 coats to achieve good coverage. Let the 1st coat dry for a couple of minutes and then roll the stencil again.)
6. Re-load the roller with paint as necessary and continue stenciling until all stencil is covered evenly ( or unevenly, if you want the "broken" or faded look).
Now remove the stencil and enjoy your artwork!
Rollers can be rinsed, dried and used many times.
WE COMBINE SHIPPING! BUY MORE AND SAVE!
WE ONLY SHIP WITH PRIORITY MAIL TO ENSURE SPEEDY DELIVERY ON DOMESTIC AND INTERNATIONAL ORDERS.
ATTENTION INTERNATIONAL CUSTOMERS:
You order may be subject to import duties, custom tariffs or VAT charges. They vary greatly from country to country and we strongly suggest checking your country’s customs policy before placing your order with us. These charges are always the responsibility of the recipient.
If any package is refused or undeliverable, the original shipping cost is non-refundable.
THANK YOU AND PLEASE COME AGAIN SOON!
© Copyright 2008-12 Innovative Art Concepts, LLC. All rights reserved. Cutting Edge Stencils is a trademark of Innovative Art Concepts, LLC
Use the same handle for 4" and 6" rollers. We suggest having a separate roller for each color for faster stenciling. You can certainly use the same roller for different colors, but it will need to be rinsed of paint and dried before applying new color. Residual water in your roller will create seepage under the stencil.
You can find 4" and 6" roller 2-pack replacements in the "Supplies" section of our store.
Here's how to use this foam roller with handle for wall stenciling:
1. First, pour some acrylic or latex paint on a foam plate or a paint tray. You don’t need much, about 3-4 tablespoons of paint is enough to start with.
2. Load your foam roller by rolling it over the paint few times until it absorbs most or all of it. There should be no visible paint on a roller surface, it should look almost dry.
3. Now blot off the excess paint on a folded paper towel by rolling it back and forth a couple times. Remember, it’s better to have less paint on your roller, than too much paint. OK, now you’re ready to stencil!
4. Place the stencil on your wall/ceiling/floor and tape it in place with few pieces of a blue painter's tape. Roll the stencil with your roller using light to medium pressure. Excessive pressure may cause paint bleeding under the stencil.
5. You can easily check how you’re doing by carefully un-taping and lifting one corner of the stencil and taking a peek. Do you like what you see? Is it enough pressure, or it can use a little more paint? If it’s too pale, just put the stencil back and roll it a couple more times back and forth, or slightly add more pressure. (When stenciling lighter colors over darker colors, you may need 2 coats to achieve good coverage. Let the 1st coat dry for a couple of minutes and then roll the stencil again.)
6. Re-load the roller with paint as necessary and continue stenciling until all stencil is covered evenly ( or unevenly, if you want the "broken" or faded look).
Now remove the stencil and enjoy your artwork!
Rollers can be rinsed, dried and used many times.
To learn a simple stenciling technique, take a look at our our step-by-step stenciling VIDEOS on YouTube.
http://www.youtube.com/user/CuttingEdgeStencils
You'll find these short video tutorials extremely helpful for your stenciling project. Even beginners get great results!
Our professional decorative company, Specfin Designs, has been a leader in faux painting for over 20 years in NYC/NJ Metropolitan area. We have hundreds of original hand drawn designs that we have turned into well-engineered sturdy stencils that are easy and fun to use. For over 20 years we painted, faux finished, plastered and stenciled in hundreds of upscale homes in the New York metropolitan area as well as other states around the country. So when we say "We know decorative painting and stenciling" we really mean it :) You can see many beautiful examples of our work by visiting http://www.specfindesigns.com
YOU ARE WELCOME TO BROWSE OUR EXTENSIVE PORTFOLIO AND USE IT FOR YOUR INSPIRATION!WE COMBINE SHIPPING! BUY MORE AND SAVE!
WE ONLY SHIP WITH PRIORITY MAIL TO ENSURE SPEEDY DELIVERY ON DOMESTIC AND INTERNATIONAL ORDERS.
ATTENTION INTERNATIONAL CUSTOMERS:
You order may be subject to import duties, custom tariffs or VAT charges. They vary greatly from country to country and we strongly suggest checking your country’s customs policy before placing your order with us. These charges are always the responsibility of the recipient.
If any package is refused or undeliverable, the original shipping cost is non-refundable.
THANK YOU AND PLEASE COME AGAIN SOON!
© Copyright 2008-12 Innovative Art Concepts, LLC. All rights reserved. Cutting Edge Stencils is a trademark of Innovative Art Concepts, LLC
Processing Time
- We process and ship orders Monday through Friday, excluding holidays.
- Most orders are processed within 1–3 business days, depending on product availability.
- Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.
Shipping Coverage
We currently ship to addresses within the United States only.
Products may ship from:
- Our U.S. warehouses, or
- Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).
Each product page clearly displays the “Ships From” location before checkout.
Shipping Methods & Estimated Delivery
| Shipping Method | Estimated Delivery | Cost |
|---|---|---|
| Free Shipping (US) | 5–10 business days | Free, available on eligible items |
| Standard Shipping (US to US by Item) | 5–10 business days | $6.50 for the first item, $3.00 each additional |
| Standard Shipping (From US Warehouse by Weight) | 3–7 business days | Starts at $6.50, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb. |
| Extended Delivery (Ships from Overseas Warehouse) | 10–15 business days | $14.50 for the first item, $4.00 each additional |
Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.
Free Shipping
We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout.
Carriers
We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.
Import Duties & Taxes
All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.
Tracking & Notifications
Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.
You can track your shipment anytime using the Track Your Order page on our website.
Order Changes & Cancellations
If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.
Contact: support@ibspot.com
Item Not Received
If your tracking number shows “Delivered” but you haven’t received your package:
- Check with your local USPS or UPS office.
- Confirm that the shipping address provided was correct.
- If the issue remains unresolved, contact support@ibspot.com for assistance.
Damaged or Lost Parcels
If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.
Customer Support
For any questions about shipping, tracking, or delivery, our customer support team is here to help.
Email: support@ibspot.com
We’re always happy to help.
Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.
Order Cancellation Policy
Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.
How to Request a Cancellation
You can contact us through:
- Email: support@ibspot.com
- Contact Form: Submit a request through our Contact Us page
Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.
Return Policy
We accept returns for most items within 30 days of delivery for a full refund.
To be eligible for a return:
- The item must be unused, in the same condition as received, and in its original packaging.
- A tracking number must be provided to confirm the return shipment.
Non-Returnable Items
Certain products cannot be returned, including:
- Perishable goods (for example, food, flowers, newspapers, magazines)
- Intimate or sanitary goods
- Hazardous materials or flammable liquids/gases
- Gift cards
- Downloadable software
- Some health and personal care items
Partial Refunds (If Applicable)
Partial refunds may be granted in specific situations, such as:
- Books with obvious signs of use
- Opened CDs, DVDs, software, or vinyl records
- Items not in their original condition, damaged, or missing parts not due to our error
- Items returned more than 30 days after delivery
How to Return an Item
To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.
Shipping Cost for Returns
Please contact us before returning any item.
We will provide a free return shipping label.
If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.
For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.
Refund Processing
Once your return is received and inspected:
- In-store returns are refunded to the original form of payment or issued as a gift card.
- Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.
Please allow:
- 5–7 business days for the return to reach our Returns Center.
- An additional 3–10 business days for your bank to post the refund to your account.
Damages, Issues & Claims
Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.
Product Claims
Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.
Exchanges
We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.
Return Address
IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States
Customer Support
Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.
Email: support@ibspot.com
Contact Form: Contact Us page
Oops!
Sorry, it looks like some products are not available in selected quantity.