Isharing-Parts For 2014-2021 Toyota Tundra Headlights Assembly Black W/O LED DRL Left Right
Isharing-Parts For 2014-2021 Toyota Tundra Headlights Assembly Black W/O LED DRL Left Right
Isharing-Parts For 2014-2021 Toyota Tundra Headlights Assembly Black W/O LED DRL Left Right
Document
On Sep 18, 2024 at 20:34:28 PDT, seller added the following information:
Compatible with
- For 2014-2021 Toyota Tundra
- ^Compatible With Halogen Headlight Models Only
- ^Not Compatible w/ Factory LED DRL Headlight Models
- ^Model Equipped with Electronic Leveling System Must Disable The Leveling System In Order To Operate Properly
Part Number
| ABPA PARTSLINK | GM2502235, GM2503235 |
| OEM | 15287023, 15287024, 15851372, 15851373, 15207723, 15207724 |
| HOLLANDER | 114-00780L, 114-00779R |
| TYC | 20649300, 20649400 |
| DORMAN | 1591106, 1591107 |
| DEPO | 3351130LAS, 3351130RAS |
Features
1Product Description
Easy Installation
- Plug-n-Play Operation, Direct Bolt-On OE Fitment or Replacement for the Stock Unit.
- Product Durability: Advanced UV coating is applied on headlamp lens, to protect the lens from scratches and cracks as well as from UV rays. The comprehensive testing processes, ensure the resistance of leakage, corrosion, and rust, for longer service life.
- Comparable to OEM in breathability and structural integrity with features like a Gore-tex fabric membrane to allow moisture to escape but also repel liquid.
- Meets or exceeds applicable DOT/SAE standards and complies with the U.S. Motor Vehicle Safety Standard, FMVSS-108.
DO HEADLIGHTS DIM OVER TIME
you’ll discover that the haze is on the outside of the headlight cover, and is caused by environmental factors. Ultraviolet light from the sun is the leading culprit, followed by road salt and grime that interact with the plastic and cause it to lose its transparency.
Headlights that fade over time are impossible to avoid, as it’s a part of how the components wear out, but it’s essential that you do something about it. By replacing the bulbs, installing new headlight lenses or getting new bulbs, you can ensure you’ll have a clear view of the road ahead.
HOW DO YOU REPLACE A HEADLIGHT ASSEMBLY?
Some headlights are part of an entire assembly, so you can’t simply change the bulb. If you need to replace the entire headlight assembly, it shouldn’t take long with most car models. If the job is straightforward, you are looking at less than an hour. However, your model might require that the entire front-bumper fascia be removed—or at least loosened—to reach the headlight assembly. For example, replacing the headlight on a Toyota Camry, Chevy Malibu, or Ford Fusion might be more challenging. It requires extra time, so give yourself at least two hours if you aren’t experienced.
Before you start, we recommend two things:
- Buy a repair manual for your vehicle.
- Watch YouTube videos specific to your model and year.
These will help you understand the specific steps required for your model. Here are essential pointers for swapping headlight assemblies.
- Only work on the headlight assembly while the car is off, and the keys are out of the ignition.
- Remove all bolted- or clipped-on connections, including the wiring harness connected in the back.
- Place any small pieces in a safe location for reassembly.
- Once you connect the new headlight assembly, try it before putting everything back together. Use the low and high beams to ensure everything is working.
Remember also to check the aim of the headlights using our guide to adjusting headlights.
Moisture in Headlights
What Can You Do About It?
Usually, when you turn the headlights on, the heat causes the moisture to evaporate. It can also evaporate on its own over the course of the day, as the sun warms things up enough to do the same job. Driving the car can also help, as it allows air to pass through the vents in the light housing and clear out the moisture, much like running the defroster in your car’s cabin clears the windshield.
Moisture in Headlights Doesn’t Have to Mean It’s Time for Replacement
Ventilation = Condensation
Since most headlights generate heat, they need to be ventilated, which means that they feature small vents that can suck in moisture when the car is turned off. If the outer lens cools more quickly than the air inside the headlight unit, it can cause condensation. This explains why you most often encounter condensation in the morning after your car has been parked overnight.
Moisture in headlights can be a frustrating problem:
- Fogginess affect the amount of light the unit projects.
- It can also cause corrosion over time inside the assembly.
Is It Time for a Replacement?
If you’re seeing more than a normal amount of moisture in your headlights, or if you’ve noticed more water inside the housing after a rain storm, you could be dealing with a cracked headlight or a problem with the rubber gaskets that seal it to the body. Most of the time, gaskets can be replaced individually, but if the headlight housing is cracked, then you’ll most likely have to replace the entire unit.
Prevent Further Moisture:
There’s a number of products that can help you recreate a firm seal.
- inspect the seal for any damage or debris. If necessary, run a bead of silicone sealant around the factory seal area to ensure no moisture can enter the assembly
- replace the seal if your housing uses a replaceable seal. You’ll also want to check the O-rings that protect the electrical connectors, bulb, vent and other components of your headlight assembly.
On Sep 18, 2024 at 20:34:28 PDT, seller added the following information:
| Brand: | Isharing-Parts |
|---|---|
| Isin: | IKZ5V3GM8IBS |
Out of Stock
In Stock
Backordered
Out of Stock
IBspot Buyer Protection
Shop confidently on IBspot, receive your item as described or your money back for eligible orders. Learn Program Terms
GUARANTEED SAFE CHECKOUT
-
MONEY BACK GUARANTEE
30 days money back guarantee, no additional fee charged.
-
EXCELLENT SUPPORT
We provide 24/7 online customer support via email.
-
Fast Shipping
One week domestic shipping. Global delivery to the US in 2 weeks.
Document 
On Sep 18, 2024 at 20:34:28 PDT, seller added the following information:
Compatible with
- For 2014-2021 Toyota Tundra
- ^Compatible With Halogen Headlight Models Only
- ^Not Compatible w/ Factory LED DRL Headlight Models
- ^Model Equipped with Electronic Leveling System Must Disable The Leveling System In Order To Operate Properly
Part Number
| ABPA PARTSLINK | GM2502235, GM2503235 |
| OEM | 15287023, 15287024, 15851372, 15851373, 15207723, 15207724 |
| HOLLANDER | 114-00780L, 114-00779R |
| TYC | 20649300, 20649400 |
| DORMAN | 1591106, 1591107 |
| DEPO | 3351130LAS, 3351130RAS |
Features
1Product Description
Easy Installation
- Plug-n-Play Operation, Direct Bolt-On OE Fitment or Replacement for the Stock Unit.
- Product Durability: Advanced UV coating is applied on headlamp lens, to protect the lens from scratches and cracks as well as from UV rays. The comprehensive testing processes, ensure the resistance of leakage, corrosion, and rust, for longer service life.
- Comparable to OEM in breathability and structural integrity with features like a Gore-tex fabric membrane to allow moisture to escape but also repel liquid.
- Meets or exceeds applicable DOT/SAE standards and complies with the U.S. Motor Vehicle Safety Standard, FMVSS-108.
DO HEADLIGHTS DIM OVER TIME
you’ll discover that the haze is on the outside of the headlight cover, and is caused by environmental factors. Ultraviolet light from the sun is the leading culprit, followed by road salt and grime that interact with the plastic and cause it to lose its transparency.
Headlights that fade over time are impossible to avoid, as it’s a part of how the components wear out, but it’s essential that you do something about it. By replacing the bulbs, installing new headlight lenses or getting new bulbs, you can ensure you’ll have a clear view of the road ahead.
HOW DO YOU REPLACE A HEADLIGHT ASSEMBLY?
Some headlights are part of an entire assembly, so you can’t simply change the bulb. If you need to replace the entire headlight assembly, it shouldn’t take long with most car models. If the job is straightforward, you are looking at less than an hour. However, your model might require that the entire front-bumper fascia be removed—or at least loosened—to reach the headlight assembly. For example, replacing the headlight on a Toyota Camry, Chevy Malibu, or Ford Fusion might be more challenging. It requires extra time, so give yourself at least two hours if you aren’t experienced.
Before you start, we recommend two things:
- Buy a repair manual for your vehicle.
- Watch YouTube videos specific to your model and year.
These will help you understand the specific steps required for your model. Here are essential pointers for swapping headlight assemblies.
- Only work on the headlight assembly while the car is off, and the keys are out of the ignition.
- Remove all bolted- or clipped-on connections, including the wiring harness connected in the back.
- Place any small pieces in a safe location for reassembly.
- Once you connect the new headlight assembly, try it before putting everything back together. Use the low and high beams to ensure everything is working.
Remember also to check the aim of the headlights using our guide to adjusting headlights.
Moisture in Headlights
What Can You Do About It?
Usually, when you turn the headlights on, the heat causes the moisture to evaporate. It can also evaporate on its own over the course of the day, as the sun warms things up enough to do the same job. Driving the car can also help, as it allows air to pass through the vents in the light housing and clear out the moisture, much like running the defroster in your car’s cabin clears the windshield.
Moisture in Headlights Doesn’t Have to Mean It’s Time for Replacement
Ventilation = Condensation
Since most headlights generate heat, they need to be ventilated, which means that they feature small vents that can suck in moisture when the car is turned off. If the outer lens cools more quickly than the air inside the headlight unit, it can cause condensation. This explains why you most often encounter condensation in the morning after your car has been parked overnight.
Moisture in headlights can be a frustrating problem:
- Fogginess affect the amount of light the unit projects.
- It can also cause corrosion over time inside the assembly.
Is It Time for a Replacement?
If you’re seeing more than a normal amount of moisture in your headlights, or if you’ve noticed more water inside the housing after a rain storm, you could be dealing with a cracked headlight or a problem with the rubber gaskets that seal it to the body. Most of the time, gaskets can be replaced individually, but if the headlight housing is cracked, then you’ll most likely have to replace the entire unit.
Prevent Further Moisture:
There’s a number of products that can help you recreate a firm seal.
- inspect the seal for any damage or debris. If necessary, run a bead of silicone sealant around the factory seal area to ensure no moisture can enter the assembly
- replace the seal if your housing uses a replaceable seal. You’ll also want to check the O-rings that protect the electrical connectors, bulb, vent and other components of your headlight assembly.
On Sep 18, 2024 at 20:34:28 PDT, seller added the following information:
- Brand: Isharing-Parts
- Lighting Technology: Halogen
- Type: Headlight Assembly
- Number of Bulbs: 0
- Placement on Vehicle: Front, Left, Right
- Features: DOT-Certified, Euro Headlights, Factory Headlights, Halo Headlights, ISO-Certified, OE-Certified, Projector Housing, Reflector Housing, SAE-Certified, Sealed Assembly
- Lens Color: Clear
- Light Color: Cold White
- Items Included: 1x Pair Headlights
- Manufacturer Part Number: 81110-0C091, 81150-0C091_2014 2015 2016 2017 2018 2019 2020 2021
- OE/OEM Part Number: 811500C080, 811100C090, 811100C080
- Item Height: 13.00
- Item Length: 19.69
- Item Width: 16.54
- Vintage Part: NO
- Universal Fitment: NO
- Manufacturer Warranty: 5 Year
- Performance Part: NO
- Finish: Polished
- Interchange Part Number: 81110-0C091, 81150-0C091, 2014 2015 2016 2017 2018 2019 2020 2021 TOYOTA TUNDRA
- Model: For 2014-2021 Toyota Tundra#^Compatible With Halogen Headlight Mo
- Superseded Part Number: 81110-0C091, 81150-0C091_2014 2015 2016 2017 2018 2019 2020 2021
- Genuine OEM: TO2502218,TO2503219,TO2503218
- Notice: Not Compatible w/ Factory LED DRL Headlight Models
- Suitable For: 2014-2021 Toyota tundra without LED DRL
Processing Time
- We process and ship orders Monday through Friday, excluding holidays.
- Most orders are processed within 1–3 business days, depending on product availability.
- Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.
Shipping Coverage
We currently ship to addresses within the United States only.
Products may ship from:
- Our U.S. warehouses, or
- Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).
Each product page clearly displays the “Ships From” location before checkout.
Shipping Methods & Estimated Delivery
| Shipping Method | Estimated Delivery | Cost |
|---|---|---|
| Free Shipping (US) | 5–10 business days | Free, available on eligible items |
| Standard Shipping (US to US by Item) | 5–10 business days | $6.50 for the first item, $2.00 each additional |
| Standard Shipping (From US Warehouse by Weight) | 3–7 business days | Starts at $6.50, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb. |
| Extended Delivery (Ships from Overseas Warehouse) | 10–15 business days | $14.50 for the first item, $2.00 each additional |
Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.
Free Shipping
We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout.
Carriers
We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.
Import Duties & Taxes
All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.
Tracking & Notifications
Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.
You can track your shipment anytime using the Track Your Order page on our website.
Order Changes & Cancellations
If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.
Contact: support@ibspot.com
Item Not Received
If your tracking number shows “Delivered” but you haven’t received your package:
- Check with your local USPS or UPS office.
- Confirm that the shipping address provided was correct.
- If the issue remains unresolved, contact support@ibspot.com for assistance.
Damaged or Lost Parcels
If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.
Customer Support
For any questions about shipping, tracking, or delivery, our customer support team is here to help.
Email: support@ibspot.com
We’re always happy to help.
Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.
Order Cancellation Policy
Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.
How to Request a Cancellation
You can contact us through:
- Email: support@ibspot.com
- Contact Form: Submit a request through our Contact Us page
Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.
Return Policy
We accept returns for most items within 30 days of delivery for a full refund.
To be eligible for a return:
- The item must be unused, in the same condition as received, and in its original packaging.
- A tracking number must be provided to confirm the return shipment.
Non-Returnable Items
Certain products cannot be returned, including:
- Perishable goods (for example, food, flowers, newspapers, magazines)
- Intimate or sanitary goods
- Hazardous materials or flammable liquids/gases
- Gift cards
- Downloadable software
- Some health and personal care items
Partial Refunds (If Applicable)
Partial refunds may be granted in specific situations, such as:
- Books with obvious signs of use
- Opened CDs, DVDs, software, or vinyl records
- Items not in their original condition, damaged, or missing parts not due to our error
- Items returned more than 30 days after delivery
How to Return an Item
To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.
Shipping Cost for Returns
Please contact us before returning any item.
We will provide a free return shipping label.
If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.
For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.
Refund Processing
Once your return is received and inspected:
- In-store returns are refunded to the original form of payment or issued as a gift card.
- Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.
Please allow:
- 5–7 business days for the return to reach our Returns Center.
- An additional 3–10 business days for your bank to post the refund to your account.
Damages, Issues & Claims
Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.
Product Claims
Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.
Exchanges
We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.
Return Address
IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States
Customer Support
Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.
Email: support@ibspot.com
Contact Form: Contact Us page
Oops!
Sorry, it looks like some products are not available in selected quantity.