JT 2004-2005 ZX10R NINJA JT GOLD X-RING Z3 ULTIMATE 525 CHAIN AND SPROCKETS KIT
JT 2004-2005 ZX10R NINJA JT GOLD X-RING Z3 ULTIMATE 525 CHAIN AND SPROCKETS KIT
JT 2004-2005 ZX10R NINJA JT GOLD X-RING Z3 ULTIMATE 525 CHAIN AND SPROCKETS KIT
NOTICE; THERE ARE NO "MADE IN CHINA" COMPONENTS IN THIS KIT ! BEWARE OF CHEAP CHINESE JUNK THAT WILL WEAR OUT PREMATURELY, AND CAUSE GREAT POTENTIAL DAMAGE TO YOU AND YOUR MOTORCYCLE (SPECIFICALLY THE ENGINE CASES WHEN THE CHAIN BREAKS) |
2004-2005 KAWASAKI ZX-10R Ninja ZX1000 C1, C2, and C3
**Also fits the = 2011-2015 KAWASAKI ZX-10R Ninja**
JT Complete High Performance Chain & Sprocket Kit
Including the new "Expert Series" JT Z1-R Super Heavy Duty X-Ring Chain
rated for up to 1400cc horsepower with an incredible 10,694# avg. tensile strength.
OEM strength and quality Japan Steel Sprockets (Premium C49 and SCM420 Chromoly)
Gear Ratio Options Available with this kit: *Exact OEM ZX-10r Ratio 17/39t -or-
Quick Acceleration 16/39t -or- Extreme Quick Acceleration 16/41t
* Unless otherwise specified, OEM ZX-10 17/39t sizes listed below will be sent;
JT 17 tooth Front & 39 tooth Rear sprockets (SCM420 Chromoly Japan Steel Front and C49 high carbon Japan Steel Rear)
and a JT ULTIMATE high strength JT Z3 Gold 525 x 112L X-Ring Chain .
JT Z3 X-Ring Chain is also available in SILVER by request. (JT calls it Black, but it's more like Dark Silver)
Leave note in "Add Message To Seller" tab during checkout to request optional Black chain or optional size sprockets.
Available optional gear ratios! Message or Call RPE Motorcycle to special order
RPEcycle.
Unless otherwise specified, Chain & sprockets are sent Exact OEM sizes with a RIVET type master link..
For reference ; Original Equipment stock sizes as supplied from Kawasaki are...
2004-2005 KAWASAKI ZX-10R OEM size is 525x112 x-ring chain, 17t Ft. Sprocket, 39t Rear Sprocket **DEFAULT**
2006-2007 KAWASAKI ZX-10R OEM size is 525x108 x-ring chain, 17t Ft. Sprocket, 40t Rear Sprocket
2008-2010 KAWASAKI ZX-10R OEM size is 525x110 x-ring chain, 17t Ft. Sprocket, 41t Rear Sprocket
2011-2015 KAWASAKI ZX-10R OEM size is 525x112 x-ring chain, 17t Ft. Sprocket, 39t Rear Sprocket **DEFAULT**
2016-2020 KAWASAKI ZX-10R OEM size is 525x114 x-ring chain, 17t Ft. Sprocket, 39t Rear Sprocket
For QUICK ACCELERATION gear ratio kit (quick off the line, quicker roll on's, wheelies), request a 16t (-1t) front sprocket and a 39t (oem) rear sprocket.
Request during checkout in "Add Message" tab this 16/39t QA Kit
*Note; Your top gear cruising rpm's will be higher, and your top speed will be lower with this quick acceleration kit.
A 17t oem front sprocket will fit with the same chain length that is used with the 16t if you ever want to go back to stock gear ratio.
For EXTREME QUICK ACCELERATION gear ratio kit (crazy quick off the line, wicked roll on's, way easier wheelies),
REQUEST Extreme QA Kit 16t (-1t) front sprocket AND a 41t (+2t) rear sprocket.
Request this 16/41t EXTREME Q.A. kit in "Add Message" tab during checkout. Your top gear cruising rpm's at 70mph will be even higher than reg. QA gearing. Top Speed will be lower. If you ever want to go back to a less radical gear ratio, you can always put a 17t front sprocket back on with the same chain length provided.
ZX10r Original Factory Supplied OEM RATIO size sprockets are the calculated "Happy Medium" of off the line acceleration, roll on's, and high speed engine rpm's with the least amount of compromise on either top end or low end acceleration. Available 520 conversion sizes (narrower, chain and sprockets) do NOT affect final drive ratio, only changing number of teeth on sprockets actually changes gear ratio.
If you just want an upgraded STRONGER final drive components kit , and are using your entire gear box ratio as it is from Kawasaki, then this OEM ZX-10r 17/39t sprocket sizes is for you.
This OEM ZX-10r ratio kit is the default gearing that will be sent unless otherwise specified
-----------------------------------------------------------------------
Teeth and Sizes Explained...
** A -1t front sprocket only change is EXACTLY the same ratio change as +3t rear sprocket only change. (Reg. QA Kit)
** A -2t front sprocket change is EXACTLY the same ratio change as +6t rear sprocket change (Very Extreme QA) Not Available!
** A -1t front and +1t rear combination is EXACTLY the same as a +4t rear only change with stock front sprocket.
** A 520 size chain is approx. 2mm narrower than a 525 chain, and 4mm narrower than a 530 chain. Less mass equals lighter weight equals easier to spin, but the ratio (teeth size) change makes the big difference. The sprocket width matches the chain width where it rides on the sprockets, thus a 520 chain must use 520 sprockets, and a 525 chain must use 525 sprockets, etc...
** RPE Motorcycle has chain and sprocket conversion kits available in 520 , 525 , and 530 sizes for most motorcycles.
** A larger rear sprocket number of teeth size requires a longer chain, however +1 or -1 tooth on the front sprocket only will use the same chain length
** A ratio change to enhance your low end (Quick Accel) will reduce your top end, and adversely.. a ratio change to enhance your top end will reduce your low end. Stock Gearing is the "Happy Medium" of both with the least amount of compromise on either end
Available JT 525 Sprocket Sizes;
JT Ft. Sprocket also available in 525 x 16 or 17 teeth
JT Rr. Sprocket available in 525 x 39 , 40 , 41, 42 and 43 teeth
Black all Steel Supersprox also available in 520 , 525 or 530 ... CALL for Availability and Price!
Also available in maximum strength / lighter weight Aluminum inner carrier with steel outer teeth
SUPERSPROX Stealth sprockets ... CALL FOR PRICE AND AVAILABILITY! These cost MORE $$
Also available by special order; Optional Color Stealth Sprockets Red, Blue & Black
Optional sprockets NOT included in this advertised JT Steel kit price. OPTIONAL SPECIAL ORDER COLORS COST MORE
*Optional Colors are custom made to order and generally take 1-2 weeks for production and delivery to RPE Motorcycle. Gold Stealth sprocket is usually in stock.
**Extended length chains in 150L+ are available in RK and DID (Not JT Chain) !!
CALL FOR PRICE & AVAILABILITY on YOUR SIZE!!
(we know exactly how much extra length chain is necessary for +3, +6, +8 or +10" extended swingarms)
RPE Motorcycle does NOT drop ship our products from a far away warehouse!
RPE Chain and Sprockets Kits are shipped to you directly from RPE Motorcycle.
Orders of advertised products will ship the same day or next day from date payment is made.
(Custom order kits or special order colors may take longer*)
Only the advertised JT Chain and Sprocket kit is the advertised price shown.
All JT Z3 chains include a RIVET type master link. (A clip type link is not available for this Expert Series Chain)
Also available from RPE Motorcycle... Tool is NOT included with Chain and Sprockets Kit (This Optional accessory costs $79.95)
Pro Chain Tool Kit $79.95 when purchased with a chain & sprockets kit! (including shipping)
RPE Motorcycle
10725 Beverly Blvd,
Whittier, CA 90601 RPEcycle.
Hours: M-F 10-6, Sat 10-2 Pacific Std. Time
Full Service, Parts, and Accessory Store for all street motorcycles Will calls, and Installation appointments welcome !
we accept Visa, Master Charge, Discover, American Express
*FREE Shipping to USA only... including... Hawaii, Alaska, VI , Guam, and Puerto Rico...
***** INTERNATIONAL BUYERS.... PLEASE LEAVE YOUR PHONE NUMBER FOR SHIPPING DOCUMENTS!!
DELIVERED to AUSTRALIA in 7 days!
Worldwide delivery , time varies depending on your customs dept..
JT Chains and Sprockets, the leading edge technology in production and materials with total dedication to excellence gives you the ultimate motorcycle sprocket and chain range at unbeatable value. Our mission is to supply you the most innovative and competitive product line fully backed by complete availability and service. Your Absolute Satisfaction is our Commitment with JT Sprockets and Chains - World's top manufacturer of aftermarket motorcycle chain and sprockets, constantly raising the industry's standards in performance, longevity and reliability Half the Power Loss (Compared with Normal O-Ring X-Ring construction reduces friction by twisting between the side plates instead of being squashed. Normal O-Rings and other makers’ modified O-Rings have squashed points that increase friction. The low friction X-Ring disperses the pressure and minimizes power loss. X-Rings have the greatest wear resistance of any other type of O-Ring or Non-O-Ring chain
Why JT?JT Sprockets is the world's leading manufacturer of aftermarket sprockets and chain, constantly raising the industry's standards for quality and service. We are committed to supplying the most durable, best quality drive components available in the marketplace worldwide. This is why we produce and sell more sprockets than all the other aftermarket brands combined. Raw Materials:JT sprockets are made using only the best available materials. Aviation-grade 7075-T6 aluminium alloy for lightweight competition sprockets, SCM415 chromoly steel alloy for front sprockets, and we are the only sprocket manufacturer using the ultra-durable high carbon C49 steel for rear sprockets. Production:The JT Sprockets factory is the largest and most advanced in the world. It is fully equipped with high accuracy machinery, including the latest generation of CNC computer design and computer controlled metal cutting equipment. The essence of a high quality sprocket is in the high precision of manufacturing and the inherent quality of the material. Through accurate machining, JT ensures maximum durability and performance. JT Sprockets are manufactured the right way – by hobbing, machining and drilling. This is the only proven way to achieve the closest of tolerances and the most accurate teeth profiles. Heat treated and hand finished to perfection, all JT sprockets meet or exceed the highest possible quality standards set for the motorcycle industry. Quality Control:Every sprocket goes through up to 25 production stages and 10 individual quality control checks before it is ready to leave the factory and the production facility has achieved the highest European quality standards |
| Brand: | JT |
|---|---|
| Isin: | ICJSEVZRQBRP |
This product is not available in the selected country
In Stock
Backordered
Out of Stock
IBspot Buyer Protection
Shop confidently on IBspot, receive your item as described or your money back for eligible orders. Learn Program Terms
GUARANTEED SAFE CHECKOUT
-
MONEY BACK GUARANTEE
30 days money back guarantee, no additional fee charged.
-
EXCELLENT SUPPORT
We provide 24/7 online customer support via email.
-
Fast Shipping
One week domestic shipping. Global delivery to the US in 2 weeks.
NOTICE; THERE ARE NO "MADE IN CHINA" COMPONENTS IN THIS KIT ! BEWARE OF CHEAP CHINESE JUNK THAT WILL WEAR OUT PREMATURELY, AND CAUSE GREAT POTENTIAL DAMAGE TO YOU AND YOUR MOTORCYCLE (SPECIFICALLY THE ENGINE CASES WHEN THE CHAIN BREAKS) |
2004-2005 KAWASAKI ZX-10R Ninja ZX1000 C1, C2, and C3
**Also fits the = 2011-2015 KAWASAKI ZX-10R Ninja**
JT Complete High Performance Chain & Sprocket Kit
Including the new "Expert Series" JT Z1-R Super Heavy Duty X-Ring Chain
rated for up to 1400cc horsepower with an incredible 10,694# avg. tensile strength.
OEM strength and quality Japan Steel Sprockets (Premium C49 and SCM420 Chromoly)
Gear Ratio Options Available with this kit: *Exact OEM ZX-10r Ratio 17/39t -or-
Quick Acceleration 16/39t -or- Extreme Quick Acceleration 16/41t
* Unless otherwise specified, OEM ZX-10 17/39t sizes listed below will be sent;
JT 17 tooth Front & 39 tooth Rear sprockets (SCM420 Chromoly Japan Steel Front and C49 high carbon Japan Steel Rear)
and a JT ULTIMATE high strength JT Z3 Gold 525 x 112L X-Ring Chain .
JT Z3 X-Ring Chain is also available in SILVER by request. (JT calls it Black, but it's more like Dark Silver)
Leave note in "Add Message To Seller" tab during checkout to request optional Black chain or optional size sprockets.
Available optional gear ratios! Message or Call RPE Motorcycle to special order
RPEcycle.
Unless otherwise specified, Chain & sprockets are sent Exact OEM sizes with a RIVET type master link..
For reference ; Original Equipment stock sizes as supplied from Kawasaki are...
2004-2005 KAWASAKI ZX-10R OEM size is 525x112 x-ring chain, 17t Ft. Sprocket, 39t Rear Sprocket **DEFAULT**
2006-2007 KAWASAKI ZX-10R OEM size is 525x108 x-ring chain, 17t Ft. Sprocket, 40t Rear Sprocket
2008-2010 KAWASAKI ZX-10R OEM size is 525x110 x-ring chain, 17t Ft. Sprocket, 41t Rear Sprocket
2011-2015 KAWASAKI ZX-10R OEM size is 525x112 x-ring chain, 17t Ft. Sprocket, 39t Rear Sprocket **DEFAULT**
2016-2020 KAWASAKI ZX-10R OEM size is 525x114 x-ring chain, 17t Ft. Sprocket, 39t Rear Sprocket
For QUICK ACCELERATION gear ratio kit (quick off the line, quicker roll on's, wheelies), request a 16t (-1t) front sprocket and a 39t (oem) rear sprocket.
Request during checkout in "Add Message" tab this 16/39t QA Kit
*Note; Your top gear cruising rpm's will be higher, and your top speed will be lower with this quick acceleration kit.
A 17t oem front sprocket will fit with the same chain length that is used with the 16t if you ever want to go back to stock gear ratio.
For EXTREME QUICK ACCELERATION gear ratio kit (crazy quick off the line, wicked roll on's, way easier wheelies),
REQUEST Extreme QA Kit 16t (-1t) front sprocket AND a 41t (+2t) rear sprocket.
Request this 16/41t EXTREME Q.A. kit in "Add Message" tab during checkout. Your top gear cruising rpm's at 70mph will be even higher than reg. QA gearing. Top Speed will be lower. If you ever want to go back to a less radical gear ratio, you can always put a 17t front sprocket back on with the same chain length provided.
ZX10r Original Factory Supplied OEM RATIO size sprockets are the calculated "Happy Medium" of off the line acceleration, roll on's, and high speed engine rpm's with the least amount of compromise on either top end or low end acceleration. Available 520 conversion sizes (narrower, chain and sprockets) do NOT affect final drive ratio, only changing number of teeth on sprockets actually changes gear ratio.
If you just want an upgraded STRONGER final drive components kit , and are using your entire gear box ratio as it is from Kawasaki, then this OEM ZX-10r 17/39t sprocket sizes is for you.
This OEM ZX-10r ratio kit is the default gearing that will be sent unless otherwise specified
-----------------------------------------------------------------------
Teeth and Sizes Explained...
** A -1t front sprocket only change is EXACTLY the same ratio change as +3t rear sprocket only change. (Reg. QA Kit)
** A -2t front sprocket change is EXACTLY the same ratio change as +6t rear sprocket change (Very Extreme QA) Not Available!
** A -1t front and +1t rear combination is EXACTLY the same as a +4t rear only change with stock front sprocket.
** A 520 size chain is approx. 2mm narrower than a 525 chain, and 4mm narrower than a 530 chain. Less mass equals lighter weight equals easier to spin, but the ratio (teeth size) change makes the big difference. The sprocket width matches the chain width where it rides on the sprockets, thus a 520 chain must use 520 sprockets, and a 525 chain must use 525 sprockets, etc...
** RPE Motorcycle has chain and sprocket conversion kits available in 520 , 525 , and 530 sizes for most motorcycles.
** A larger rear sprocket number of teeth size requires a longer chain, however +1 or -1 tooth on the front sprocket only will use the same chain length
** A ratio change to enhance your low end (Quick Accel) will reduce your top end, and adversely.. a ratio change to enhance your top end will reduce your low end. Stock Gearing is the "Happy Medium" of both with the least amount of compromise on either end
Available JT 525 Sprocket Sizes;
JT Ft. Sprocket also available in 525 x 16 or 17 teeth
JT Rr. Sprocket available in 525 x 39 , 40 , 41, 42 and 43 teeth
Black all Steel Supersprox also available in 520 , 525 or 530 ... CALL for Availability and Price!
Also available in maximum strength / lighter weight Aluminum inner carrier with steel outer teeth
SUPERSPROX Stealth sprockets ... CALL FOR PRICE AND AVAILABILITY! These cost MORE $$
Also available by special order; Optional Color Stealth Sprockets Red, Blue & Black
Optional sprockets NOT included in this advertised JT Steel kit price. OPTIONAL SPECIAL ORDER COLORS COST MORE
*Optional Colors are custom made to order and generally take 1-2 weeks for production and delivery to RPE Motorcycle. Gold Stealth sprocket is usually in stock.
**Extended length chains in 150L+ are available in RK and DID (Not JT Chain) !!
CALL FOR PRICE & AVAILABILITY on YOUR SIZE!!
(we know exactly how much extra length chain is necessary for +3, +6, +8 or +10" extended swingarms)
RPE Motorcycle does NOT drop ship our products from a far away warehouse!
RPE Chain and Sprockets Kits are shipped to you directly from RPE Motorcycle.
Orders of advertised products will ship the same day or next day from date payment is made.
(Custom order kits or special order colors may take longer*)
Only the advertised JT Chain and Sprocket kit is the advertised price shown.
All JT Z3 chains include a RIVET type master link. (A clip type link is not available for this Expert Series Chain)
Also available from RPE Motorcycle... Tool is NOT included with Chain and Sprockets Kit (This Optional accessory costs $79.95)
Pro Chain Tool Kit $79.95 when purchased with a chain & sprockets kit! (including shipping)
RPE Motorcycle
10725 Beverly Blvd,
Whittier, CA 90601 RPEcycle.
Hours: M-F 10-6, Sat 10-2 Pacific Std. Time
Full Service, Parts, and Accessory Store for all street motorcycles Will calls, and Installation appointments welcome !
we accept Visa, Master Charge, Discover, American Express
*FREE Shipping to USA only... including... Hawaii, Alaska, VI , Guam, and Puerto Rico...
***** INTERNATIONAL BUYERS.... PLEASE LEAVE YOUR PHONE NUMBER FOR SHIPPING DOCUMENTS!!
DELIVERED to AUSTRALIA in 7 days!
Worldwide delivery , time varies depending on your customs dept..
JT Chains and Sprockets, the leading edge technology in production and materials with total dedication to excellence gives you the ultimate motorcycle sprocket and chain range at unbeatable value. Our mission is to supply you the most innovative and competitive product line fully backed by complete availability and service. Your Absolute Satisfaction is our Commitment with JT Sprockets and Chains - World's top manufacturer of aftermarket motorcycle chain and sprockets, constantly raising the industry's standards in performance, longevity and reliability Half the Power Loss (Compared with Normal O-Ring X-Ring construction reduces friction by twisting between the side plates instead of being squashed. Normal O-Rings and other makers’ modified O-Rings have squashed points that increase friction. The low friction X-Ring disperses the pressure and minimizes power loss. X-Rings have the greatest wear resistance of any other type of O-Ring or Non-O-Ring chain
Why JT?JT Sprockets is the world's leading manufacturer of aftermarket sprockets and chain, constantly raising the industry's standards for quality and service. We are committed to supplying the most durable, best quality drive components available in the marketplace worldwide. This is why we produce and sell more sprockets than all the other aftermarket brands combined. Raw Materials:JT sprockets are made using only the best available materials. Aviation-grade 7075-T6 aluminium alloy for lightweight competition sprockets, SCM415 chromoly steel alloy for front sprockets, and we are the only sprocket manufacturer using the ultra-durable high carbon C49 steel for rear sprockets. Production:The JT Sprockets factory is the largest and most advanced in the world. It is fully equipped with high accuracy machinery, including the latest generation of CNC computer design and computer controlled metal cutting equipment. The essence of a high quality sprocket is in the high precision of manufacturing and the inherent quality of the material. Through accurate machining, JT ensures maximum durability and performance. JT Sprockets are manufactured the right way – by hobbing, machining and drilling. This is the only proven way to achieve the closest of tolerances and the most accurate teeth profiles. Heat treated and hand finished to perfection, all JT sprockets meet or exceed the highest possible quality standards set for the motorcycle industry. Quality Control:Every sprocket goes through up to 25 production stages and 10 individual quality control checks before it is ready to leave the factory and the production facility has achieved the highest European quality standards |
- Part Brand: JT CHAIN, JT SPROCKETS
- Part Type: Drive
- Part By Region: Asian
- Drive Part Type: Chains
- Make: kawasaki
- Surface Finish: GOLD/GOLD chain, Silver sprockets
- Manufacturer Part Number: JT Z3 Gold 525x112L , JT1537.17t , JT1489.39t
- Placement on Vehicle: Left, Rear
- Brand: JT
- Warranty: Yes
Processing Time
- We process and ship orders Monday through Friday, excluding holidays.
- Most orders are processed within 1–3 business days, depending on product availability.
- Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.
Shipping Coverage
We currently ship to addresses within the United States only.
Products may ship from:
- Our U.S. warehouses, or
- Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).
Each product page clearly displays the “Ships From” location before checkout.
Shipping Methods & Estimated Delivery
| Shipping Method | Estimated Delivery | Cost |
|---|---|---|
| Free Shipping (US) | 5–10 business days | Free, available on eligible items |
| Standard Shipping (US to US by Item) | 5–10 business days | $6.50 for the first item, $3.00 each additional |
| Standard Shipping (From US Warehouse by Weight) | 3–7 business days | Starts at $6.50, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb. |
| Extended Delivery (Ships from Overseas Warehouse) | 10–15 business days | $14.50 for the first item, $4.00 each additional |
Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.
Free Shipping
We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout.
Carriers
We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.
Import Duties & Taxes
All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.
Tracking & Notifications
Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.
You can track your shipment anytime using the Track Your Order page on our website.
Order Changes & Cancellations
If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.
Contact: support@ibspot.com
Item Not Received
If your tracking number shows “Delivered” but you haven’t received your package:
- Check with your local USPS or UPS office.
- Confirm that the shipping address provided was correct.
- If the issue remains unresolved, contact support@ibspot.com for assistance.
Damaged or Lost Parcels
If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.
Customer Support
For any questions about shipping, tracking, or delivery, our customer support team is here to help.
Email: support@ibspot.com
We’re always happy to help.
Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.
Order Cancellation Policy
Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.
How to Request a Cancellation
You can contact us through:
-
Email: support@ibspot.com
-
Contact Form: Submit a request through our Contact Us page
Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.
Return Policy
We accept returns for most items within 30 days of delivery for a full refund.
To be eligible for a return:
-
The item must be unused, in the same condition as received, and in its original packaging.
-
A tracking number must be provided to confirm the return shipment.
Non-Returnable Items
Certain products cannot be returned, including:
-
Perishable goods (for example, food, flowers, newspapers, magazines)
-
Intimate or sanitary goods
-
Hazardous materials or flammable liquids/gases
-
Gift cards
-
Downloadable software
-
Some health and personal care items
Partial Refunds (If Applicable)
Partial refunds may be granted in specific situations, such as:
-
Books with obvious signs of use
-
Opened CDs, DVDs, software, or vinyl records
-
Items not in their original condition, damaged, or missing parts not due to our error
-
Items returned more than 30 days after delivery
How to Return an Item
To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.
Shipping Cost for Returns
Please contact us before returning any item.
We will provide a free return shipping label.
If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.
For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.
Refund Processing
Once your return is received and inspected:
-
In-store returns are refunded to the original form of payment or issued as a gift card.
-
Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.
Please allow:
-
5–7 business days for the return to reach our Returns Center.
-
An additional 3–10 business days for your bank to post the refund to your account.
Damages, Issues & Claims
Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.
Product Claims
Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.
Exchanges
We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.
Return Address
IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States
Customer Support
Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.
Email: support@ibspot.com
Contact Form: Contact Us page
Oops!
Sorry, it looks like some products are not available in selected quantity.
