Suertree Incubator 24 Egg Hatcher Chicken Duck Humidity Turner Digital Temperature
Suertree Incubator 24 Egg Hatcher Chicken Duck Humidity Turner Digital Temperature
Suertree Incubator 24 Egg Hatcher Chicken Duck Humidity Turner Digital Temperature
- STABLE TEMPERATURE -The temperature difference of the whole egg incubator is small. It is suitable for incubating all kinds of eggs. Automatic water intake, no need to open the cover to add water, reduce temperature and humidity loss and improve the hatching effect.
- AUTOMATIC EGG TURNER: Automatically turn the eggs once in 90-120 minutes (the machine automatically turns the eggs and hatches without manual operation). The direction of turning the egg is automatically determined by the computer.
- DIGITAL DISPLAY: The intelligent incubator thermometer has a clear and intuitive temperature digital display, no need to buy additional hygrometer and thermometer to monitor.
- BUILT-IN EGG CANDLER: No need to buy additional egg candler to observe the development of eggs. Suitable for hatching eggs, duck eggs, quail eggs, bird eggs, goose eggs, etc.
- LARGE CAPACITY: This fully automatic chicken egg incubator is suitable for breeding poultry eggs-12 chicken eggs and 12 quail eggs,also suitable for hatching duck, bird, goose, parrot etc.
Product Description
egg incubator Instructions
- Step 1: Place a sink protection net to prevent the chicks from drowning after they get out of their shells.
- Step 2: Choose a suitable egg tray and place it on the bottom shell of the machine, with the patterned road surface facing up.
- Step 3: First place the host and check whether the edges are tightly buckled. Next, add 100ML of water, and connect the adapter for 3-4 hours of test temperature operation.
- Step 4: After the temperature test is completed, put the breeding eggs in the egg tray and lay them flat according to the position of the egg pit.
- Step 5: Fasten the host and the bottom shell, turn on the power, and click the add button to test the egg turning status of the machine (the default state is automatically turning eggs). After the test is normal, it enters the normal incubation state. The entire incubation process is always energized.
take eggs as an example to explain the incubation method:
Step 1: selection of breeding eggs
Fertilized eggs that are 3-7 days old (best), no feces, no cracks, no pollution of broken egg liquid (the date of laying the egg can be marked on the egg with a pen).
Step 2: temperature and humidity
During the entire incubation period, you can incubate at the default temperature of 37.8. There is no need to adjust the temperature. Basically, add about 100ml of water every day. Use a water injector to add water directly to the chassis from the side. Humidity is only auxiliary. Keep the chassis with a little water.
Step 3: vent
The air volume adjustment port on the machine lid is closed during the incubation period, and at most one-third of the opening in the last three days, be careful not to open it all.
Step 4: egg candler
After 7 days of incubation, you can select the development status of the breeding eggs. Press the “lighting” button on the panel in a dark environment, and use the egg light to take photos one by one. As long as you can clearly see the bloodshot inside, it is the development. Good, otherwise it will be infertile or weak eggs that cannot be hatched, and need to be screened out so that the hatching rate can be improved.
Step 5: drying eggs and spraying
After incubation for 17 days, you can open the cover of the machine to dry the eggs for about 5 minutes every day (keep the ambient temperature appropriate and not too low! Otherwise, the eggs will flash), and then use the small watering can to add about 38 degrees of warm water on top of the eggs Spray a few times, and the sprayed mist will naturally fall on the breeding eggs. Spray 3-5 times a day, and then cover the machine after spraying. This will help the breeding eggs to break their shells smoothly. The hatching of other breeding eggs is also to dry the eggs and spray them with warm water a few days before the shell.
Step 6: Out of the shell
In the last 3 days, you don’t need to turn the eggs during the shell period. Just remove the gear under the motor. Pay attention to the chicks breaking the shell. At this time, be sure to spray more warm water to prevent the egg shell from being too hard and causing sticking. Inside the shell.
Step 7: warm and brood the chicks
After the shell is broken, pick out the egg skins in time, and when the chicken feathers are dry, take them out of the incubator, find a carton and put a warming lamp in the carton to slowly cool off and raise them. Generally, the brooding chicks are kept warm for 7-10 days. The temperature is about 30 degrees.
Automatic egg turning function the factory set automatically turn the eggs once in 90-120 minutes (the machine does not need manual operation during the automatic egg turning and incubation process). The direction of turning the egg is automatically determined by the computer. Set the temperature For users with experience and special needs to set the temperature, click the "set button", and then press the "up button" or "down button" to adjust to the temperature you want, and then click the "set button" to keep the setting good temperature. |
| Working voltage: AC 110V-240V 50 ~ 60Hz DC 12V (battery needs to be brought by yourself) Work rate: 40W Relative humidity: less than 85% Ambient temperature: 15°C~ 35°C |
Wide Usage:
Ideal for home and school use, educational activities, or laboratory settings. Especially perfect for survivalists, small commercial farmers, budget-conscious poultry hobbyists, chicken lovers, etc.
Multi-functional egg incubator that can hatch chicken, duck, goose, pigeon, peacock, quail eggs and most poultry eggs or reptile eggs.
21 days for eggs, 28 days for duck eggs, 31 days for goose eggs, 18 days for pigeon eggs, 28 days for peacock eggs, and 18 days for quail eggs.
| Brand: | Suertree |
|---|---|
| Isin: | ISHYLPBGA9ZH |
Out of Stock
In Stock
Backordered
Out of Stock
IBspot Buyer Protection
Shop confidently on IBspot, receive your item as described or your money back for eligible orders. Learn Program Terms
GUARANTEED SAFE CHECKOUT
-
MONEY BACK GUARANTEE
30 days money back guarantee, no additional fee charged.
-
EXCELLENT SUPPORT
We provide 24/7 online customer support via email.
-
Fast Shipping
One week domestic shipping. Global delivery to the US in 2 weeks.
- STABLE TEMPERATURE -The temperature difference of the whole egg incubator is small. It is suitable for incubating all kinds of eggs. Automatic water intake, no need to open the cover to add water, reduce temperature and humidity loss and improve the hatching effect.
- AUTOMATIC EGG TURNER: Automatically turn the eggs once in 90-120 minutes (the machine automatically turns the eggs and hatches without manual operation). The direction of turning the egg is automatically determined by the computer.
- DIGITAL DISPLAY: The intelligent incubator thermometer has a clear and intuitive temperature digital display, no need to buy additional hygrometer and thermometer to monitor.
- BUILT-IN EGG CANDLER: No need to buy additional egg candler to observe the development of eggs. Suitable for hatching eggs, duck eggs, quail eggs, bird eggs, goose eggs, etc.
- LARGE CAPACITY: This fully automatic chicken egg incubator is suitable for breeding poultry eggs-12 chicken eggs and 12 quail eggs,also suitable for hatching duck, bird, goose, parrot etc.
Product Description
egg incubator Instructions
- Step 1: Place a sink protection net to prevent the chicks from drowning after they get out of their shells.
- Step 2: Choose a suitable egg tray and place it on the bottom shell of the machine, with the patterned road surface facing up.
- Step 3: First place the host and check whether the edges are tightly buckled. Next, add 100ML of water, and connect the adapter for 3-4 hours of test temperature operation.
- Step 4: After the temperature test is completed, put the breeding eggs in the egg tray and lay them flat according to the position of the egg pit.
- Step 5: Fasten the host and the bottom shell, turn on the power, and click the add button to test the egg turning status of the machine (the default state is automatically turning eggs). After the test is normal, it enters the normal incubation state. The entire incubation process is always energized.
take eggs as an example to explain the incubation method:
Step 1: selection of breeding eggs
Fertilized eggs that are 3-7 days old (best), no feces, no cracks, no pollution of broken egg liquid (the date of laying the egg can be marked on the egg with a pen).
Step 2: temperature and humidity
During the entire incubation period, you can incubate at the default temperature of 37.8. There is no need to adjust the temperature. Basically, add about 100ml of water every day. Use a water injector to add water directly to the chassis from the side. Humidity is only auxiliary. Keep the chassis with a little water.
Step 3: vent
The air volume adjustment port on the machine lid is closed during the incubation period, and at most one-third of the opening in the last three days, be careful not to open it all.
Step 4: egg candler
After 7 days of incubation, you can select the development status of the breeding eggs. Press the “lighting” button on the panel in a dark environment, and use the egg light to take photos one by one. As long as you can clearly see the bloodshot inside, it is the development. Good, otherwise it will be infertile or weak eggs that cannot be hatched, and need to be screened out so that the hatching rate can be improved.
Step 5: drying eggs and spraying
After incubation for 17 days, you can open the cover of the machine to dry the eggs for about 5 minutes every day (keep the ambient temperature appropriate and not too low! Otherwise, the eggs will flash), and then use the small watering can to add about 38 degrees of warm water on top of the eggs Spray a few times, and the sprayed mist will naturally fall on the breeding eggs. Spray 3-5 times a day, and then cover the machine after spraying. This will help the breeding eggs to break their shells smoothly. The hatching of other breeding eggs is also to dry the eggs and spray them with warm water a few days before the shell.
Step 6: Out of the shell
In the last 3 days, you don’t need to turn the eggs during the shell period. Just remove the gear under the motor. Pay attention to the chicks breaking the shell. At this time, be sure to spray more warm water to prevent the egg shell from being too hard and causing sticking. Inside the shell.
Step 7: warm and brood the chicks
After the shell is broken, pick out the egg skins in time, and when the chicken feathers are dry, take them out of the incubator, find a carton and put a warming lamp in the carton to slowly cool off and raise them. Generally, the brooding chicks are kept warm for 7-10 days. The temperature is about 30 degrees.
Automatic egg turning function the factory set automatically turn the eggs once in 90-120 minutes (the machine does not need manual operation during the automatic egg turning and incubation process). The direction of turning the egg is automatically determined by the computer. Set the temperature For users with experience and special needs to set the temperature, click the "set button", and then press the "up button" or "down button" to adjust to the temperature you want, and then click the "set button" to keep the setting good temperature. |
| Working voltage: AC 110V-240V 50 ~ 60Hz DC 12V (battery needs to be brought by yourself) Work rate: 40W Relative humidity: less than 85% Ambient temperature: 15°C~ 35°C |
Wide Usage:
Ideal for home and school use, educational activities, or laboratory settings. Especially perfect for survivalists, small commercial farmers, budget-conscious poultry hobbyists, chicken lovers, etc.
Multi-functional egg incubator that can hatch chicken, duck, goose, pigeon, peacock, quail eggs and most poultry eggs or reptile eggs.
21 days for eggs, 28 days for duck eggs, 31 days for goose eggs, 18 days for pigeon eggs, 28 days for peacock eggs, and 18 days for quail eggs.
Item Specifics
Processing Time
- We process and ship orders Monday through Friday, excluding holidays.
- Most orders are processed within 1–3 business days, depending on product availability.
- Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.
Shipping Coverage
We currently ship to addresses within the United States only.
Products may ship from:
- Our U.S. warehouses, or
- Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).
Each product page clearly displays the “Ships From” location before checkout.
Shipping Methods & Estimated Delivery
| Shipping Method | Estimated Delivery | Cost |
|---|---|---|
| Free Shipping (US) | 5–10 business days | Free, available on eligible items |
| Standard Shipping (US to US by Item) | 5–10 business days | $6.50 for the first item, $2.00 each additional |
| Standard Shipping (From US Warehouse by Weight) | 3–7 business days | Starts at $6.50, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb. |
| Extended Delivery (Ships from Overseas Warehouse) | 10–20 business days | $14.50 for the first item, $2.00 each additional |
Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.
Free Shipping
We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout.
Carriers
We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.
Import Duties & Taxes
All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.
Tracking & Notifications
Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.
You can track your shipment anytime using the Track Your Order page on our website.
Order Changes & Cancellations
If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.
Contact: support@ibspot.com
Item Not Received
If your tracking number shows “Delivered” but you haven’t received your package:
- Check with your local USPS or UPS office.
- Confirm that the shipping address provided was correct.
- If the issue remains unresolved, contact support@ibspot.com for assistance.
Damaged or Lost Parcels
If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.
Customer Support
For any questions about shipping, tracking, or delivery, our customer support team is here to help.
Email: support@ibspot.com
We’re always happy to help.
Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.
Order Cancellation Policy
Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.
How to Request a Cancellation
You can contact us through:
- Email: support@ibspot.com
- Contact Form: Submit a request through our Contact Us page
Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.
Return Policy
We accept returns for most items within 30 days of delivery for a full refund.
To be eligible for a return:
- The item must be unused, in the same condition as received, and in its original packaging.
- A tracking number must be provided to confirm the return shipment.
Non-Returnable Items
Certain products cannot be returned, including:
- Perishable goods (for example, food, flowers, newspapers, magazines)
- Intimate or sanitary goods
- Hazardous materials or flammable liquids/gases
- Gift cards
- Downloadable software
- Some health and personal care items
Partial Refunds (If Applicable)
Partial refunds may be granted in specific situations, such as:
- Books with obvious signs of use
- Opened CDs, DVDs, software, or vinyl records
- Items not in their original condition, damaged, or missing parts not due to our error
- Items returned more than 30 days after delivery
How to Return an Item
To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.
Shipping Cost for Returns
Please contact us before returning any item.
We will provide a free return shipping label.
If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.
For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.
Refund Processing
Once your return is received and inspected:
- In-store returns are refunded to the original form of payment or issued as a gift card.
- Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.
Please allow:
- 5–7 business days for the return to reach our Returns Center.
- An additional 3–10 business days for your bank to post the refund to your account.
Damages, Issues & Claims
Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.
Product Claims
Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.
Exchanges
We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.
Return Address
IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States
Customer Support
Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.
Email: support@ibspot.com
Contact Form: Contact Us page
Oops!
Sorry, it looks like some products are not available in selected quantity.