TBvechi BMR 200 Replace Hydraulic Motor Orbital Shaft 25mm
TBvechi BMR 200 Replace Hydraulic Motor Orbital Shaft 25mm
BMR 200 Replace Hydraulic Motor Orbital Shaft 25mm
Description
This hydraulic motor is not only made of sturdy and durable materials but also has high speed and torque. The stator rotor and bearings have high precision and strong pressure resistance. It can be widely applied in industries, agriculture, and other fields, providing you with strong power.
Key Features
Build to Last: It is made of cast iron and rubber, and adopts a painting process, making the whole product corrosion-resistant, wear-resistant, high-temperature resistant, sturdy, and stable, and can maintain its practicality for a long time.
Good Sealing Performance: Equipped with three tiers of rubber sealing rings, it greatly enhances its sealing performance and can effectively prevent oil leakage, making your user experience better.
High Precision: The oil pan, stator, rotor pair, and output shaft inside ensure the high precision of the product and make your use more accurate and error-free.
Strong Compression Resistance: The bearing has a strong radial force and high-pressure resistance, which can effectively extend the service life of the product.
Strong Power: High speed (continuous: 284rpm; discontinuous: 339rpm) and high torque (continuous: 285N * M; discontinuous: 319N * M) bring you stronger power, thus improving your efficiency.
Powerful Function: As an executive component of the hydraulic system, the motor can effectively convert the liquid pressure energy provided by the hydraulic pump into the mechanical energy (torque and speed) of its output shaft, thus providing sufficient energy.
Easy to Clean: The simple structure, small body, and smooth surface allow you easily clean the dust with a soft towel and water.
Protective Packaging: The sponge can better protect your product during transportation and make it delivered to you completely to the greatest extent.
Good Customer Service: Communication is the best way to solve problems. If you encounter any problem after purchase, please contact us in time before opening or unpacking the box. We will do our best to solve the problem for you.
Details
Round Corners: Compared with traditional square corners, an arc design can better ensure safety.
Anti-slip Base: The base with multiple support legs can effectively maintain stability during the process.
Application
It is mainly used in the rotating mechanisms of various machinery such as agriculture, fisheries, light industry, lifting and transportation, mining, and engineering machinery.
Specification
Style: Modern
Color: Black
Model: Diamond Flange BMR-200
Displacement: 200CC
Material: Cast Iron, Rubber
Surface Treatment: Painting
Number of Items: 1
Assembly Required: Yes
Mount Type: Mechanical Equipment
Port Size: G1/2''
Net Weight: 7.9kg/17.42lbs
Gross Weight: 8.5kg/18.743lbs
Package Size: 26*13*10cm/10.24*5.12*3.94inch
Max Speed: 284/339 RPM(Continuous/Discontinuous)
Flow: 57/68 LPM (Continuous/Discontinuous)
Torque N.m: 285/319 (Continuous/Discontinuous)
Pressure Drop: 110/124 Bar (Continuous/Discontinuous)
Package Included
1* Hydraulic Motor
Notes
1. We recommend that the normal operating oil temperature is 20~60℃/68-140℉, and the maximum system operating temperature is 90℃/194℉ (not more than one hour). The kinematic viscosity of the oil at 40°C/104℉ is 42-74mm2/s. The hydraulic oil can be selected according to the actual working and ambient temperature.
2. We recommend that the filter precision be 10-30 microns. It is better to add a magnetic block at the bottom of the oil tank to prevent metal chips from entering the system. The solid pollution level of working oil shall not be higher than 19/16.
3. The motor can be used in series or parallel. When the back pressure exceeds 10MPA (the rotating speed is lower than 200RPM), the external drain port must be used for pressure relief. It is better to connect the external drain port directly to the oil tank.
4. In order to make the motor have a long service life, the best working condition of the motor should be 1/3-2/3 of the rated working condition. When loading the motor, it should be operated at 30% of the rated pressure for about 1 hour. In any case, before loading the motor, ensure that the motor is filled with oil.
5. It is strongly recommended to run the motor at 30% load for about 1 hour before running at full load to allow the motor to be fully run-in.
6. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.
Welcome to autocomponents999
Thank you for your support!
If you have any questions,please feel free to contact us!!!
Welcome to autocomponents999to purchase products, please feel free to contact us for any questions.??
- We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
Warranty | 5 Years |
---|---|
Manufacturer Warranty | 3 Years |
After-sales Service | Yes👍 |
Country/Region of Manufacture | Unknown |
Brand | TBvechi |
shipping notice | Can not ship to Puerto Rico,Alaska/Hawaii |
MPN | Does not apply |
Style | Modern |
Color | Black |
Model | Diamond Flange BMR-200 |
Displacement | 200CC |
Material | Cast Iron, Rubber |
Surface Treatment | Painting |
Number of Items | 1 |
Assembly Required | Yes |
Mounting Type | Mechanical Equipment |
Port Size | G1/2'' |
Net Weight | 7.9kg/17.42lbs |
Gross Weight | 8.5kg/18.743lbs |
Package Size | 26*13*10cm/10.24*5.12*3.94inch |
Max Speed | 284/339 RPM(Continuous/Discontinuous) |
Flow | 57/68 LPM (Continuous/Discontinuous) |
Torque N.m | 285/319 (Continuous/Discontinuous) |
Pressure Drop | 110/124 Bar (Continuous/Discontinuous) |
UPC | Does not apply |
Brand: | TBvechi |
---|---|
Isin: | IQPDZDJEULF3 |

IBspot Buyer Protection
Shop confidently on IBspot, receive your item as described or your money back for eligible orders. Learn Program Terms

GUARANTEED SAFE CHECKOUT
-
MONEY BACK GUARANTEE
30 days money back guarantee, no additional fee charged.
-
EXCELLENT SUPPORT
We provide 24/7 online customer support via email.
-
Fast Shipping
One week domestic shipping. Global delivery to the US in 2 weeks.
















BMR 200 Replace Hydraulic Motor Orbital Shaft 25mm
Description
This hydraulic motor is not only made of sturdy and durable materials but also has high speed and torque. The stator rotor and bearings have high precision and strong pressure resistance. It can be widely applied in industries, agriculture, and other fields, providing you with strong power.
Key Features
Build to Last: It is made of cast iron and rubber, and adopts a painting process, making the whole product corrosion-resistant, wear-resistant, high-temperature resistant, sturdy, and stable, and can maintain its practicality for a long time.
Good Sealing Performance: Equipped with three tiers of rubber sealing rings, it greatly enhances its sealing performance and can effectively prevent oil leakage, making your user experience better.
High Precision: The oil pan, stator, rotor pair, and output shaft inside ensure the high precision of the product and make your use more accurate and error-free.
Strong Compression Resistance: The bearing has a strong radial force and high-pressure resistance, which can effectively extend the service life of the product.
Strong Power: High speed (continuous: 284rpm; discontinuous: 339rpm) and high torque (continuous: 285N * M; discontinuous: 319N * M) bring you stronger power, thus improving your efficiency.
Powerful Function: As an executive component of the hydraulic system, the motor can effectively convert the liquid pressure energy provided by the hydraulic pump into the mechanical energy (torque and speed) of its output shaft, thus providing sufficient energy.
Easy to Clean: The simple structure, small body, and smooth surface allow you easily clean the dust with a soft towel and water.
Protective Packaging: The sponge can better protect your product during transportation and make it delivered to you completely to the greatest extent.
Good Customer Service: Communication is the best way to solve problems. If you encounter any problem after purchase, please contact us in time before opening or unpacking the box. We will do our best to solve the problem for you.
Details
Round Corners: Compared with traditional square corners, an arc design can better ensure safety.
Anti-slip Base: The base with multiple support legs can effectively maintain stability during the process.
Application
It is mainly used in the rotating mechanisms of various machinery such as agriculture, fisheries, light industry, lifting and transportation, mining, and engineering machinery.
Specification
Style: Modern
Color: Black
Model: Diamond Flange BMR-200
Displacement: 200CC
Material: Cast Iron, Rubber
Surface Treatment: Painting
Number of Items: 1
Assembly Required: Yes
Mount Type: Mechanical Equipment
Port Size: G1/2''
Net Weight: 7.9kg/17.42lbs
Gross Weight: 8.5kg/18.743lbs
Package Size: 26*13*10cm/10.24*5.12*3.94inch
Max Speed: 284/339 RPM(Continuous/Discontinuous)
Flow: 57/68 LPM (Continuous/Discontinuous)
Torque N.m: 285/319 (Continuous/Discontinuous)
Pressure Drop: 110/124 Bar (Continuous/Discontinuous)
Package Included
1* Hydraulic Motor
Notes
1. We recommend that the normal operating oil temperature is 20~60℃/68-140℉, and the maximum system operating temperature is 90℃/194℉ (not more than one hour). The kinematic viscosity of the oil at 40°C/104℉ is 42-74mm2/s. The hydraulic oil can be selected according to the actual working and ambient temperature.
2. We recommend that the filter precision be 10-30 microns. It is better to add a magnetic block at the bottom of the oil tank to prevent metal chips from entering the system. The solid pollution level of working oil shall not be higher than 19/16.
3. The motor can be used in series or parallel. When the back pressure exceeds 10MPA (the rotating speed is lower than 200RPM), the external drain port must be used for pressure relief. It is better to connect the external drain port directly to the oil tank.
4. In order to make the motor have a long service life, the best working condition of the motor should be 1/3-2/3 of the rated working condition. When loading the motor, it should be operated at 30% of the rated pressure for about 1 hour. In any case, before loading the motor, ensure that the motor is filled with oil.
5. It is strongly recommended to run the motor at 30% load for about 1 hour before running at full load to allow the motor to be fully run-in.
6. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.
Welcome to autocomponents999
Thank you for your support!
If you have any questions,please feel free to contact us!!!

Welcome to autocomponents999to purchase products, please feel free to contact us for any questions.??

- We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
Warranty | 5 Years |
---|---|
Manufacturer Warranty | 3 Years |
After-sales Service | Yes👍 |
Country/Region of Manufacture | Unknown |
Brand | TBvechi |
shipping notice | Can not ship to Puerto Rico,Alaska/Hawaii |
MPN | Does not apply |
Style | Modern |
Color | Black |
Model | Diamond Flange BMR-200 |
Displacement | 200CC |
Material | Cast Iron, Rubber |
Surface Treatment | Painting |
Number of Items | 1 |
Assembly Required | Yes |
Mounting Type | Mechanical Equipment |
Port Size | G1/2'' |
Net Weight | 7.9kg/17.42lbs |
Gross Weight | 8.5kg/18.743lbs |
Package Size | 26*13*10cm/10.24*5.12*3.94inch |
Max Speed | 284/339 RPM(Continuous/Discontinuous) |
Flow | 57/68 LPM (Continuous/Discontinuous) |
Torque N.m | 285/319 (Continuous/Discontinuous) |
Pressure Drop | 110/124 Bar (Continuous/Discontinuous) |
UPC | Does not apply |


- Warranty: 5 Years
- Manufacturer Warranty: 3 Years
- After-sales Service: Yes
- Country/Region of Manufacture: Unknown
- Brand: TBvechi
- shipping notice: Can not ship to Puerto Rico,Alaska/Hawaii
- MPN: Does not apply
- Style: Modern
- Color: Black
- Model: Diamond Flange BMR-200
- Displacement: 200CC
- Material: Cast Iron, Rubber
- Surface Treatment: Painting
- Number of Items: 1
- Assembly Required: Yes
- Mounting Type: Mechanical Equipment
- Port Size: G1/2''
- Net Weight: 7.9kg/17.42lbs
- Gross Weight: 8.5kg/18.743lbs
- Package Size: 26*13*10cm/10.24*5.12*3.94inch
- Max Speed: 284/339 RPM(Continuous/Discontinuous)
- Flow: 57/68 LPM (Continuous/Discontinuous)
- Torque N.m: 285/319 (Continuous/Discontinuous)
- Pressure Drop: 110/124 Bar (Continuous/Discontinuous)
- UPC: Does not apply
Processing Time
- We process and ship orders Monday through Friday, excluding holidays.
- Most orders are processed within 1–3 business days, depending on product availability.
- Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.
Shipping Coverage
We currently ship to addresses within the United States only.
Products may ship from:
- Our U.S. warehouses, or
- Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).
Each product page clearly displays the “Ships From” location before checkout.
Shipping Methods & Estimated Delivery
Shipping Method | Estimated Delivery | Cost |
---|---|---|
Free Shipping (US) | 5–10 business days | Free, available on eligible items |
Standard Shipping (US to US by Item) | 5–10 business days | $6.50 for the first item, $3.00 each additional |
Standard Shipping (From US Warehouse by Weight) | 3–7 business days | Starts at $6.50, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb. |
Extended Delivery (Ships from Overseas Warehouse) | 10–15 business days | $14.50 for the first item, $4.00 each additional |
Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.
Free Shipping
We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout.
Carriers
We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.
Import Duties & Taxes
All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.
Tracking & Notifications
Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.
You can track your shipment anytime using the Track Your Order page on our website.
Order Changes & Cancellations
If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.
Contact: support@ibspot.com
Item Not Received
If your tracking number shows “Delivered” but you haven’t received your package:
- Check with your local USPS or UPS office.
- Confirm that the shipping address provided was correct.
- If the issue remains unresolved, contact support@ibspot.com for assistance.
Damaged or Lost Parcels
If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.
Customer Support
For any questions about shipping, tracking, or delivery, our customer support team is here to help.
Email: support@ibspot.com
We’re always happy to help.
Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.
Order Cancellation Policy
Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.
How to Request a Cancellation
You can contact us through:
-
Email: support@ibspot.com
-
Contact Form: Submit a request through our Contact Us page
Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.
Return Policy
We accept returns for most items within 30 days of delivery for a full refund.
To be eligible for a return:
-
The item must be unused, in the same condition as received, and in its original packaging.
-
A tracking number must be provided to confirm the return shipment.
Non-Returnable Items
Certain products cannot be returned, including:
-
Perishable goods (for example, food, flowers, newspapers, magazines)
-
Intimate or sanitary goods
-
Hazardous materials or flammable liquids/gases
-
Gift cards
-
Downloadable software
-
Some health and personal care items
Partial Refunds (If Applicable)
Partial refunds may be granted in specific situations, such as:
-
Books with obvious signs of use
-
Opened CDs, DVDs, software, or vinyl records
-
Items not in their original condition, damaged, or missing parts not due to our error
-
Items returned more than 30 days after delivery
How to Return an Item
To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.
Shipping Cost for Returns
Please contact us before returning any item.
We will provide a free return shipping label.
If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.
For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.
Refund Processing
Once your return is received and inspected:
-
In-store returns are refunded to the original form of payment or issued as a gift card.
-
Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.
Please allow:
-
5–7 business days for the return to reach our Returns Center.
-
An additional 3–10 business days for your bank to post the refund to your account.
Damages, Issues & Claims
Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.
Product Claims
Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.
Exchanges
We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.
Return Address
IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States
Customer Support
Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.
Email: support@ibspot.com
Contact Form: Contact Us page
Oops!
Sorry, it looks like some products are not available in selected quantity.