Skip to main content

Toro Fuel Pump 139-0685 TimeCutter SS, ZS, MX, SW





Welcome to Larry's Small Engines.

There is a model list way down below but read this first.

This is for the TORO / Time Cutter / Exmarks and tractors but
Go by Your part number to make sure You are getting the right one. 
This is PART No.# 139-0685, 1390685

THERE ARE TWO VERY IMPORTANT MESSAGES BELOW!!!

OTHER BUSINESSES WILL NOT TELL YOU THIS BUT IF YOU 
READ THE WHOLE DESCRIPTION BELOW, IT WILL TELL YOU THE REASON WHY YOU 
ARE MORE THAN LIKELY REPLACING YOUR FUEL PUMP WITH A NEW OE FUEL PUMP.
IT WILL ALSO TELL YOU IF YOU EVEN NEED ONE OR NOT!

READ THE 5 MINUTE DESCRIPTION BELOW TO SEE WHAT 
 OTHER BUSINESSES WILL NOT TELL YOU TO DO LIKE...

(1.) ON HOW TO SAVE MONEY AND MAKE YOUR FUEL PUMP LAST 2 TO 3 TIMES LONGER
(2.) WHY YOU SHOULD ONLY BUY AN OE FUEL PUMP THAT IS COMPAITABLE AND
(3.) HOW TO TROUBLESHOOT YOUR PROBLEM FIRST BEFORE BUYING AN OE FUEL PUMP.


HERE IS THE (1.) THING YOU NEED TO 
MAKE SURE THAT YOU ARE NOT DOING...

OUR OE FUEL PUMP IS COMPAITABLE WITH UP TO 10% (E-10) OF ETHANOL BUT....
IT IS BEST TO USE FUEL WITH NO ETHANOL IN IT!!

QUESTION: WANT TO DOUBLE OR MORE LIKE TRIPLE THE LIFE OF YOUR FUEL PUMP?
ANSWER: THEN STOP USING FUEL WITH ANY ETHANOL IN IT!

THEY WILL NEVER TELL YOU THIS BUT
ETHANOL EATS AWAY AT THIN RUBBER AND THIN PLASTIC.
YOUR SMALL ENGINE WAS NOT MADE TO HAVE THAT 
FUEL WITH ETHANOL RAN THRU IT.
ALSO NOT MADE FOR THE FUEL PUMP TO HAVE IT RAN THRU IT!!!
ETHANOL WILL EVENTUALLY START EATTING AWAY AT 
YOUR CARBURETOR COMPONETS AS WELL, LIKE THE NEEDLE SEAT AND BOWL GASKET!!!
THERE ARE FUEL STATIONS OUT THERE THAT SELL GASOLINE WITH NO ETHANOL IN IT.
SHELL FUEL STATIONS OF 91 OR 93 V-POWER OCTANE IS A GOOD PLACE TO START.
THERE ARE OTHERS OUT THERE LIKE STANDARD OIL, AMACO AND 
CHEVRON FUEL STATIONS JUST TO NAME A FEW, AS WELL AS MANY OTHERS. 
LOOK AT THE PUMP HANDEL! 
IT SHOWS RIGHT ON THE HANDEL AS TO IF IT IS E-10, E-15, E-30 OR E-85. 
E-85 IS JUST WHAT IT MEANS! 85% ETHANOL!!!!
YOUR FUEL PUMP WONT LAST BUT A COUPLE OF 
MONTHS AT MOST IF YOU PUT THAT E-85 IN IT!!!


HERE IS THE NUMBER (2.) THING...

WATCH OUT FOR THE CHINA LOOK-A-LIKE FUEL PUMPS OUT THERE!


THERE ARE FUEL PUMPS OUT THERE THAT LOOK ALMOST IDENTICAL TO THE 
OE ONE YOU SEE HERE FOR YOUR ENGINE.
THEM DEFECTIVE FAKES WILL NOT WORK RIGHT AND WE SERIOUSLY MEAN THAT  
MOST DO NOT EVEN WORK AT ALL!!! LOOK AT THE PHOTOS TO 
SEE WHAT WE ARE TALKING ABOUT OF THEIR INTERNAL COMPONETS.
THEIR DIAPHRAGM IS MADE OF SOME
WEIRD THIN RUBBER LAYER OVER BOTH SIDES OF WHAT LOOKS TO BE LIKE A WIRE MESH SCREEN! 
VERY ODD! IT HAS NO GIVE TO IT LIKE A RUBBER DIAPHRAGM DOES. 
IT IS JUST ALL AROUND MADE WRONG!

1. THE DIAPRAGM IS THIN AND TOO SMALL AROUND WHERE IT DOES NOT WANT TO SIT INTO THE 
RESSESED AREA WHERE IT IS SUPOSED TO. 
IF IT IS TOO TIGHT THEN HOW IS IT (THE DIAPHRAGM) SUPOSSED TO
FLUCTUATE BACK AND FORTH TO PUMP THE FUEL! WE CANNOT SEE WHERE IT CAN!
I MEAN....... MAYBEY LITTLE TINY MOVEMENTS BUT NOW YOUR TALKING ABOUT A 
LOT OF WEAR AND TEAR ON THE STARTER MOTOR WITH ALL THE CRANKING!


2. EVEN THE BRASS BREATHER VENT DOES NOT LOOK LIKE IT ALLOWS ACTUAL AIR TO 
PASS BACK AND FORTH THROUGH IT!
THIS IS A MUST FOR THE dIAPHRAGM TO BE ABLE TO MAKE THE MOVEMENT IT NEEDS TO PUMP THE FUEL.
EVEN THE VALVES IN IT ARE MADE OF PLASTIC AND NOT RUBBER! 
HOW IS THIN PLASTIC SUPOSSED TO SEAL UP AGAINST PLASTIC? IT WONT! 
THIS WILL CAUSE THE FUEL TO SEEP BACK TOWARDS THE FUEL TANK. 
SPECIALLY IF THE FUEL TANK IS LOCATED AT A LOWER LEVEL UNDER THAT OF 
THE ENGINE LIKE UNDER THE SEAT OF A TRACTOR. 
THUS EVERY TIME YOU SHUT YOUR ENGINE DOWN, YOU WILL HAVE TO 
ALMOST CHOKE THE CARBURETOR TO GET THE ENGINE TO FIRE BACK UP!

3. THE MATERIAL THAT WE SEEN THAT THEY USED TO MAKE THE DIAPHRAGM IS NOT MADE OF 
THICK RUBBER. THAT MATERIAL DOES NOT STRETCH AT ALL! 
IT IS LIKE A THIN LAYER OF RUBBER SPRAYED OUT OVER BOTH SIDES OF A SCREEN WIRE MESH!
EVEN THE SPRING THEY USED TO PUSH THE DIAPHRAGM BACK WAS MADE TOO STIFF SO 
THAT IT WILL NOT ALLOW THE ENGINES PISTON TO MAKE THE MOVEMENT OF WHAT THE 
DIAPHRAGM NEEDS TO PUMP THE FUEL!!! 

IT IS AS IF THEY HAVE NO CLUE AS TO WHAT THE PURPOSE IS OF THIS UNIT OR DO THEY?
OH! BUT NOW THERE IS A THOUGHT!!
MAYBE THEY ARE MADE THIS WAY ON PURPOSE TO MAKE OTHER COMPONETS / PARTS TO FAIL QUICKLY! 
LIKE THE STARTER MOTOR TO WHERE IT NEEDS TO BE REPLACED IN A SHORT PERIOD OF TIME?
MAYBE TO GET YOU ALL TO BUY THEIR CHEAPER JUNK STARTER MOTOR THAT 
NEEDS REPLACED SHORTLY AFTER THE WARRENTY RUNS OUT?
PRETTY SMART IF YOU THINK ABOUT IT! 
MAYBE ALL ON PURPOSE SO THAT THEY CAN CONTINUE TO DRAIN THE FUNDS OF YOUR WALLET!

MAYBE THEY ARE SMARTER THAN WE ALL GIVE THEM CREDIT FOR!


AGAIN!, LOOK CLOSELY AT THE PHOTOS OF THIS LISTING!

THAT FAKE FUEL PUMP YOU SEE IN THE LAST FEW PHOTOS WAS FROM SOMEONE WHO 
BOUGHT/MADE A PRIOR PURCHASE ELSWHERE AND THEN FOUND IT TO NOT WORK.
THEY THEN MADE A PURCHASE FROM US AND TRIED TO DO A 
RETURN OF THE FAKE ONE TO US TO GET THE LARGER REFUND. 
LITTLE DID THEY KNOW THAT TO THE TRAINED EYE THERE IS A 
TINY DIFFERENCE FROM OUR OE ONE AND THE FAKE ONES THAT 
WE CANNOT SHOW BECAUSE THEN, THEY WILL ONLY TRY TO MAKE THAT 
LITTLE CORRECTION IN THE FUTURE TO WHERE IT WILL
MAKE IT EVEN MORE DIFFICULT FOR US TO TELL THE DIFFERENCE FROM THE 
OE ONE TO THE FAKE ONE WITHOUT TAKING IT APART!

AS FOR THEM, THEY WERE REPORTED, THERE WAS NO REFUND GIVEN AND 
THEY WERE THEN BLOCKED FROM EVER TRYING TO MAKE ANY
 FUTURE PURCHASES FROM US AGAIN!

THIS OE FUEL PUMP....


THAT YOU SEE HERE IN THE FIRST FEW PHOTOS IS THE 
POLY RESIN FIBER (NOT CHEAP PLASTIC) FUEL PUMP WITH 
THICKER (NOT THIN) PIT LINER RUBBER DIAPHRAGM THAT IS SERVICEABLE.
 MADE TO WHERE YOU CAN CAREFULLY TAKE IT APART TO CLEAN IT IF NEEDED. 

THIS ALSO COMES WITH TINY RUBBER CAPS COVERING THE INLET, OUTLET AND 
VACUUM PORTS TO KEEP INSECTS FROM 
GETTING INSIDE AND RUINING THE DIAPHRAGM DURING STORAGE. 

THAT IS JUST ANOTHER PREVENTATIVE MEASURE TAKEN SO THAT OUR CUSTOMERS KNOW THAT 
THEY WILL RECEIVE A WORRY-FREE OE FUEL PUMP STRAIGHT OUT OF THE BOX. 

THE BOTTOM-LINE IS.... 

HAS CHINA MADE ANYTHING AT ALL TO LAST OR TO 
BENIFIT ANY OF US HERE IN THE USA? 
THE ONLY REAL CONTRIBUTION THEY HAVE MADE TO THIS COUNTRY IS OF 
THEIR JUNK BEING PUT IN OUR LANDFILLS!!!

THE OE FUEL PUMP!

The OE Fuel Pump is made of  a 
Poly Resin Fiber (Not Cheap Plastic).
It has a thicker (Not thin) pit liner diaphragm in it.
The valves is made of rubber and not plastic either!
This can also be carefully taken apart and cleaned if needed.
This also comes with tiny rubber caps over the 
Fuel Inlet, Fuel Outlet and Vacuum Port to 
keep insects from getting inside and ruining the diaphragm during storage.

This is just another preventative measure so you know that you will 
receive a worry-free OE fuel pump straight out of the box.


The best installation procedure!

This should always be assembled in this order on just about everything...
CLEAR PVC fuel line from tank to sediment bowl, to good quality fuel filter, to 
fuel pump and then to carb. 

If You have a sediment bowl, then you should use it!!!


If it is at all possible (on anything that your engine is on) then mount a 
sediment bowl, anywhere after the 
fuel tank where You can visibly see it because this will help catch that 
unwanted water that seems to always find its way into your gasoline can. 
This is mostly caused from the fuel stations not removing the 
condensation soon enough from their tanks that are in the ground!
A sediment bowl will keep the water from getting into your carburetor, filter and pump. 
This is because water is heavier than gasoline and you will see it in the sediment glass bowl. 
it is very simple to unscrew the glass from the 
sediment shut off valve, empty it and reassemble it.  

Hopefully You found this 
info. (that others wont take the time to tell You) Helpful. 

BELOW IS A FRACTION OF THE FEEDBACK RECEIVED.


Wish I would have bought this one first! Excellent price, quality, delivery...TY!!!............Buyer: ptcruizerman (484)

Fast shipping and great product. 
This was my 3rd fuel pump I purchased to get it running correctly. 
I specifically bought here for the quality, more expensive than the 
cheap garbage I got the First 2 times, but less than the 
wasted money for those 2 that did not work........................................................Buyer: ch493904 (2)

Better than expected Thanks..............................................................................................................Buyer: machos0 (223)
delighted with the fuel pump, nice kit that facilitates the installation. thanks!..........................Buyer: 
EXCELLENT! SHOWED UNPRECEDENTED FOLLOWUP. Will buy here again...........................................................Buyer: curtholmes (841)
Thank you very much! Perfect! Item as described, fast shipping........................Buyer: furryhans (324)
Great price and product! fast shipping! 5star ebayer*****..........................................Buyer: cjs0058 (274)


You will receive an OE Fuel pump Just Like the One in the 2nd picture. 

Before this fuel pump is shipped, it is removed from the box and 

tested to make sure it fully functional.

We Guarantee Our fuel pump to be fully functional or
YOUR FULL money back including FREE return shipping!

NO ONE SHIPS FASTER THAN US! 

WE TRY TO SHIP SAME DAY IF ORDER IS COMPLETED BEFORE 11:00am EST. MON-FRI. BUT
NO LATER THAN NEXT BUSINESS DAY.

Specs:

Fits 1/4" Fuel Line
Vacuum Pulse Pump. 
AGAIN, not compatible with more than 10% of ETHANOL but try 
to use fuel with NO ETHANOL in it for longer lasting life!

Here is just a small list of the models that use this Fuel pump. 

23522 (Brush Cutter)

33522 (Brush Cutter)

74388 (TimeCutter ZS 3200S Riding Mower)

74616 (TimeCutter SS 4216 Riding Mower)

74621 (TimeCutter SS 3200 Riding Mower)

74629 (TimeCutter SS 3216 Riding Mower)

74650 (TimeCutter ZS 3200S Riding Mower)

74655 (TimeCutter ZS 4200S Riding Mower)

74665 (TimeCutter ZS 4200S Riding Mower)

74670 (TimeCutter SW 3200 Riding Mower)

74682 (TimeCutter ZS 3200S Riding Mower)

74684 (TimeCutter ZS 4200S Riding Mower)

74685 (TimeCutter ZS 4200S Riding Mower)

74705 (TimeCutter SS 4200 Riding Mower)

74710 (TimeCutter SS 3225 Riding Mower)

74710TA (TimeCutter SS 3225 Riding Mower)

74711 (TimeCutter SS 4200 Riding Mower)

74720 (TimeCutter SS 4200 Riding Mower)

74725 (TimeCutter SS 4200 Riding Mower)

74750 (TimeCutter MX 3450 Riding Mower)

74765 (TimeCutter MX 4200 Riding Mower)

74780 (TimeCutter SW 3200 Riding Mower)

74781 (TimeCutter SW 3200 Riding Mower)

75740 (TimeCutter 4200 Riding Mower)

Fits Exmark models

Exmark Lazer Z 60" Kohler Command 25hp

QTE452CEM42100 Quest Drive Levers

QTE452CEM42200 Quest Drive Levers

QTS452CEM34200 Quest Drive Levers

QZE452CEM42100 Quest Drive Levers

LARRY'S SMALL ENGINES.

Brand: Toro Commercial replacement pump
Isin: I19IN2JMMLFM

$53.80

$54.16
1% off
  • Free shipping in US
  • Arrives:

  • Free 30-Day returns

In Stock

Sold by , Fulfilled By IBSPOT
Ships from USA

IBspot Buyer Protection

Shop confidently on IBspot, receive your item as described or your money back for eligible orders. Learn Program Terms

supported payment methods:Visa, Mastercard, Discover, Amex, Apple Pay, Google Pay

GUARANTEED SAFE CHECKOUT

More seller options

Starting from

Compare all sellers
  • MONEY BACK GUARANTEE

    30 days money back guarantee, no additional fee charged.

  • EXCELLENT SUPPORT

    We provide 24/7 online customer support via email.

  • Fast Shipping

    One week domestic shipping. Global delivery to the US in 2 weeks.

scroll to top arrow
Toro Fuel Pump 139-0685 TimeCutter SS, ZS, MX, SW

Toro Fuel Pump 139-0685 TimeCutter SS, ZS, MX, SW

$53.80 $54.16 (1% off)





Welcome to Larry's Small Engines.

There is a model list way down below but read this first.

This is for the TORO / Time Cutter / Exmarks and tractors but
Go by Your part number to make sure You are getting the right one. 
This is PART No.# 139-0685, 1390685

THERE ARE TWO VERY IMPORTANT MESSAGES BELOW!!!

OTHER BUSINESSES WILL NOT TELL YOU THIS BUT IF YOU 
READ THE WHOLE DESCRIPTION BELOW, IT WILL TELL YOU THE REASON WHY YOU 
ARE MORE THAN LIKELY REPLACING YOUR FUEL PUMP WITH A NEW OE FUEL PUMP.
IT WILL ALSO TELL YOU IF YOU EVEN NEED ONE OR NOT!

READ THE 5 MINUTE DESCRIPTION BELOW TO SEE WHAT 
 OTHER BUSINESSES WILL NOT TELL YOU TO DO LIKE...

(1.) ON HOW TO SAVE MONEY AND MAKE YOUR FUEL PUMP LAST 2 TO 3 TIMES LONGER
(2.) WHY YOU SHOULD ONLY BUY AN OE FUEL PUMP THAT IS COMPAITABLE AND
(3.) HOW TO TROUBLESHOOT YOUR PROBLEM FIRST BEFORE BUYING AN OE FUEL PUMP.


HERE IS THE (1.) THING YOU NEED TO 
MAKE SURE THAT YOU ARE NOT DOING...

OUR OE FUEL PUMP IS COMPAITABLE WITH UP TO 10% (E-10) OF ETHANOL BUT....
IT IS BEST TO USE FUEL WITH NO ETHANOL IN IT!!

QUESTION: WANT TO DOUBLE OR MORE LIKE TRIPLE THE LIFE OF YOUR FUEL PUMP?
ANSWER: THEN STOP USING FUEL WITH ANY ETHANOL IN IT!

THEY WILL NEVER TELL YOU THIS BUT
ETHANOL EATS AWAY AT THIN RUBBER AND THIN PLASTIC.
YOUR SMALL ENGINE WAS NOT MADE TO HAVE THAT 
FUEL WITH ETHANOL RAN THRU IT.
ALSO NOT MADE FOR THE FUEL PUMP TO HAVE IT RAN THRU IT!!!
ETHANOL WILL EVENTUALLY START EATTING AWAY AT 
YOUR CARBURETOR COMPONETS AS WELL, LIKE THE NEEDLE SEAT AND BOWL GASKET!!!
THERE ARE FUEL STATIONS OUT THERE THAT SELL GASOLINE WITH NO ETHANOL IN IT.
SHELL FUEL STATIONS OF 91 OR 93 V-POWER OCTANE IS A GOOD PLACE TO START.
THERE ARE OTHERS OUT THERE LIKE STANDARD OIL, AMACO AND 
CHEVRON FUEL STATIONS JUST TO NAME A FEW, AS WELL AS MANY OTHERS. 
LOOK AT THE PUMP HANDEL! 
IT SHOWS RIGHT ON THE HANDEL AS TO IF IT IS E-10, E-15, E-30 OR E-85. 
E-85 IS JUST WHAT IT MEANS! 85% ETHANOL!!!!
YOUR FUEL PUMP WONT LAST BUT A COUPLE OF 
MONTHS AT MOST IF YOU PUT THAT E-85 IN IT!!!


HERE IS THE NUMBER (2.) THING...

WATCH OUT FOR THE CHINA LOOK-A-LIKE FUEL PUMPS OUT THERE!


THERE ARE FUEL PUMPS OUT THERE THAT LOOK ALMOST IDENTICAL TO THE 
OE ONE YOU SEE HERE FOR YOUR ENGINE.
THEM DEFECTIVE FAKES WILL NOT WORK RIGHT AND WE SERIOUSLY MEAN THAT  
MOST DO NOT EVEN WORK AT ALL!!! LOOK AT THE PHOTOS TO 
SEE WHAT WE ARE TALKING ABOUT OF THEIR INTERNAL COMPONETS.
THEIR DIAPHRAGM IS MADE OF SOME
WEIRD THIN RUBBER LAYER OVER BOTH SIDES OF WHAT LOOKS TO BE LIKE A WIRE MESH SCREEN! 
VERY ODD! IT HAS NO GIVE TO IT LIKE A RUBBER DIAPHRAGM DOES. 
IT IS JUST ALL AROUND MADE WRONG!

1. THE DIAPRAGM IS THIN AND TOO SMALL AROUND WHERE IT DOES NOT WANT TO SIT INTO THE 
RESSESED AREA WHERE IT IS SUPOSED TO. 
IF IT IS TOO TIGHT THEN HOW IS IT (THE DIAPHRAGM) SUPOSSED TO
FLUCTUATE BACK AND FORTH TO PUMP THE FUEL! WE CANNOT SEE WHERE IT CAN!
I MEAN....... MAYBEY LITTLE TINY MOVEMENTS BUT NOW YOUR TALKING ABOUT A 
LOT OF WEAR AND TEAR ON THE STARTER MOTOR WITH ALL THE CRANKING!


2. EVEN THE BRASS BREATHER VENT DOES NOT LOOK LIKE IT ALLOWS ACTUAL AIR TO 
PASS BACK AND FORTH THROUGH IT!
THIS IS A MUST FOR THE dIAPHRAGM TO BE ABLE TO MAKE THE MOVEMENT IT NEEDS TO PUMP THE FUEL.
EVEN THE VALVES IN IT ARE MADE OF PLASTIC AND NOT RUBBER! 
HOW IS THIN PLASTIC SUPOSSED TO SEAL UP AGAINST PLASTIC? IT WONT! 
THIS WILL CAUSE THE FUEL TO SEEP BACK TOWARDS THE FUEL TANK. 
SPECIALLY IF THE FUEL TANK IS LOCATED AT A LOWER LEVEL UNDER THAT OF 
THE ENGINE LIKE UNDER THE SEAT OF A TRACTOR. 
THUS EVERY TIME YOU SHUT YOUR ENGINE DOWN, YOU WILL HAVE TO 
ALMOST CHOKE THE CARBURETOR TO GET THE ENGINE TO FIRE BACK UP!

3. THE MATERIAL THAT WE SEEN THAT THEY USED TO MAKE THE DIAPHRAGM IS NOT MADE OF 
THICK RUBBER. THAT MATERIAL DOES NOT STRETCH AT ALL! 
IT IS LIKE A THIN LAYER OF RUBBER SPRAYED OUT OVER BOTH SIDES OF A SCREEN WIRE MESH!
EVEN THE SPRING THEY USED TO PUSH THE DIAPHRAGM BACK WAS MADE TOO STIFF SO 
THAT IT WILL NOT ALLOW THE ENGINES PISTON TO MAKE THE MOVEMENT OF WHAT THE 
DIAPHRAGM NEEDS TO PUMP THE FUEL!!! 

IT IS AS IF THEY HAVE NO CLUE AS TO WHAT THE PURPOSE IS OF THIS UNIT OR DO THEY?
OH! BUT NOW THERE IS A THOUGHT!!
MAYBE THEY ARE MADE THIS WAY ON PURPOSE TO MAKE OTHER COMPONETS / PARTS TO FAIL QUICKLY! 
LIKE THE STARTER MOTOR TO WHERE IT NEEDS TO BE REPLACED IN A SHORT PERIOD OF TIME?
MAYBE TO GET YOU ALL TO BUY THEIR CHEAPER JUNK STARTER MOTOR THAT 
NEEDS REPLACED SHORTLY AFTER THE WARRENTY RUNS OUT?
PRETTY SMART IF YOU THINK ABOUT IT! 
MAYBE ALL ON PURPOSE SO THAT THEY CAN CONTINUE TO DRAIN THE FUNDS OF YOUR WALLET!

MAYBE THEY ARE SMARTER THAN WE ALL GIVE THEM CREDIT FOR!


AGAIN!, LOOK CLOSELY AT THE PHOTOS OF THIS LISTING!

THAT FAKE FUEL PUMP YOU SEE IN THE LAST FEW PHOTOS WAS FROM SOMEONE WHO 
BOUGHT/MADE A PRIOR PURCHASE ELSWHERE AND THEN FOUND IT TO NOT WORK.
THEY THEN MADE A PURCHASE FROM US AND TRIED TO DO A 
RETURN OF THE FAKE ONE TO US TO GET THE LARGER REFUND. 
LITTLE DID THEY KNOW THAT TO THE TRAINED EYE THERE IS A 
TINY DIFFERENCE FROM OUR OE ONE AND THE FAKE ONES THAT 
WE CANNOT SHOW BECAUSE THEN, THEY WILL ONLY TRY TO MAKE THAT 
LITTLE CORRECTION IN THE FUTURE TO WHERE IT WILL
MAKE IT EVEN MORE DIFFICULT FOR US TO TELL THE DIFFERENCE FROM THE 
OE ONE TO THE FAKE ONE WITHOUT TAKING IT APART!

AS FOR THEM, THEY WERE REPORTED, THERE WAS NO REFUND GIVEN AND 
THEY WERE THEN BLOCKED FROM EVER TRYING TO MAKE ANY
 FUTURE PURCHASES FROM US AGAIN!

THIS OE FUEL PUMP....


THAT YOU SEE HERE IN THE FIRST FEW PHOTOS IS THE 
POLY RESIN FIBER (NOT CHEAP PLASTIC) FUEL PUMP WITH 
THICKER (NOT THIN) PIT LINER RUBBER DIAPHRAGM THAT IS SERVICEABLE.
 MADE TO WHERE YOU CAN CAREFULLY TAKE IT APART TO CLEAN IT IF NEEDED. 

THIS ALSO COMES WITH TINY RUBBER CAPS COVERING THE INLET, OUTLET AND 
VACUUM PORTS TO KEEP INSECTS FROM 
GETTING INSIDE AND RUINING THE DIAPHRAGM DURING STORAGE. 

THAT IS JUST ANOTHER PREVENTATIVE MEASURE TAKEN SO THAT OUR CUSTOMERS KNOW THAT 
THEY WILL RECEIVE A WORRY-FREE OE FUEL PUMP STRAIGHT OUT OF THE BOX. 

THE BOTTOM-LINE IS.... 

HAS CHINA MADE ANYTHING AT ALL TO LAST OR TO 
BENIFIT ANY OF US HERE IN THE USA? 
THE ONLY REAL CONTRIBUTION THEY HAVE MADE TO THIS COUNTRY IS OF 
THEIR JUNK BEING PUT IN OUR LANDFILLS!!!

THE OE FUEL PUMP!

The OE Fuel Pump is made of  a 
Poly Resin Fiber (Not Cheap Plastic).
It has a thicker (Not thin) pit liner diaphragm in it.
The valves is made of rubber and not plastic either!
This can also be carefully taken apart and cleaned if needed.
This also comes with tiny rubber caps over the 
Fuel Inlet, Fuel Outlet and Vacuum Port to 
keep insects from getting inside and ruining the diaphragm during storage.

This is just another preventative measure so you know that you will 
receive a worry-free OE fuel pump straight out of the box.


The best installation procedure!

This should always be assembled in this order on just about everything...
CLEAR PVC fuel line from tank to sediment bowl, to good quality fuel filter, to 
fuel pump and then to carb. 

If You have a sediment bowl, then you should use it!!!


If it is at all possible (on anything that your engine is on) then mount a 
sediment bowl, anywhere after the 
fuel tank where You can visibly see it because this will help catch that 
unwanted water that seems to always find its way into your gasoline can. 
This is mostly caused from the fuel stations not removing the 
condensation soon enough from their tanks that are in the ground!
A sediment bowl will keep the water from getting into your carburetor, filter and pump. 
This is because water is heavier than gasoline and you will see it in the sediment glass bowl. 
it is very simple to unscrew the glass from the 
sediment shut off valve, empty it and reassemble it.  

Hopefully You found this 
info. (that others wont take the time to tell You) Helpful. 

BELOW IS A FRACTION OF THE FEEDBACK RECEIVED.


Wish I would have bought this one first! Excellent price, quality, delivery...TY!!!............Buyer: ptcruizerman (484)

Fast shipping and great product. 
This was my 3rd fuel pump I purchased to get it running correctly. 
I specifically bought here for the quality, more expensive than the 
cheap garbage I got the First 2 times, but less than the 
wasted money for those 2 that did not work........................................................Buyer: ch493904 (2)

Better than expected Thanks..............................................................................................................Buyer: machos0 (223Teal star icon for feedback score in between 100 to 499)
delighted with the fuel pump, nice kit that facilitates the installation. thanks!..........................Buyer: 
EXCELLENT! SHOWED UNPRECEDENTED FOLLOWUP. Will buy here again...........................................................Buyer: curtholmes (841Purple star icon for feedback score in between 500 to 999)
Thank you very much! Perfect! Item as described, fast shipping........................Buyer: furryhans (324Teal star icon for feedback score in between 100 to 499)
Great price and product! fast shipping! 5star ebayer*****..........................................Buyer: cjs0058 (274Teal star icon for feedback score in between 100 to 499)


You will receive an OE Fuel pump Just Like the One in the 2nd picture. 

Before this fuel pump is shipped, it is removed from the box and 

tested to make sure it fully functional.

We Guarantee Our fuel pump to be fully functional or
YOUR FULL money back including FREE return shipping!

NO ONE SHIPS FASTER THAN US! 

WE TRY TO SHIP SAME DAY IF ORDER IS COMPLETED BEFORE 11:00am EST. MON-FRI. BUT
NO LATER THAN NEXT BUSINESS DAY.

Specs:

Fits 1/4" Fuel Line
Vacuum Pulse Pump. 
AGAIN, not compatible with more than 10% of ETHANOL but try 
to use fuel with NO ETHANOL in it for longer lasting life!

Here is just a small list of the models that use this Fuel pump. 

23522 (Brush Cutter)

33522 (Brush Cutter)

74388 (TimeCutter ZS 3200S Riding Mower)

74616 (TimeCutter SS 4216 Riding Mower)

74621 (TimeCutter SS 3200 Riding Mower)

74629 (TimeCutter SS 3216 Riding Mower)

74650 (TimeCutter ZS 3200S Riding Mower)

74655 (TimeCutter ZS 4200S Riding Mower)

74665 (TimeCutter ZS 4200S Riding Mower)

74670 (TimeCutter SW 3200 Riding Mower)

74682 (TimeCutter ZS 3200S Riding Mower)

74684 (TimeCutter ZS 4200S Riding Mower)

74685 (TimeCutter ZS 4200S Riding Mower)

74705 (TimeCutter SS 4200 Riding Mower)

74710 (TimeCutter SS 3225 Riding Mower)

74710TA (TimeCutter SS 3225 Riding Mower)

74711 (TimeCutter SS 4200 Riding Mower)

74720 (TimeCutter SS 4200 Riding Mower)

74725 (TimeCutter SS 4200 Riding Mower)

74750 (TimeCutter MX 3450 Riding Mower)

74765 (TimeCutter MX 4200 Riding Mower)

74780 (TimeCutter SW 3200 Riding Mower)

74781 (TimeCutter SW 3200 Riding Mower)

75740 (TimeCutter 4200 Riding Mower)

Fits Exmark models

Exmark Lazer Z 60" Kohler Command 25hp

QTE452CEM42100 Quest Drive Levers

QTE452CEM42200 Quest Drive Levers

QTS452CEM34200 Quest Drive Levers

QZE452CEM42100 Quest Drive Levers

LARRY'S SMALL ENGINES.


  • Compatible Brand: Toro
  • Power Source: Gas
  • Custom Bundle: No
  • Color: Black
  • Compatible Model: TimeCutter, Quest, Lazer Z
  • Material: Poly Resin Composite (Not Cheap Plastic)
  • MPN: 139-0685 Fuel, Pump, 1390685 Toro, TimeCutter SS, ZS, MX, SW, Toro 139-0685
  • Brand: Toro Commercial replacement pump
  • Type: Vacuuum pulse pump
  • Horsepower: Many hp Engines
  • Number in Pack: 1
  • Voltage: Does Not Apply
  • Model: Toro 139-0685
  • UPC: Does not apply

Shipping Summary:

  • Packages are shipped from Monday to Friday.
  • The usual time for processing an order is 1 to 3 business days, but may vary depending on the availability of products ordered. This period excludes delivery times, which depend on your geographic location.
  • We provide tracking for every order. Tracking will be available once your product is shipped. Each individual product may be shipped from different fulfillment centers across the globe as our product research team spends the time to source quality yet affordable products. 

Estimated delivery times:

  • Standard Shipping: 3-7 business days
  • Expedited Shipping: 2-5 business days
  • International Shipping: 10 - 15 business days

Please note that these are estimates, not guarantees. Delivery time depends on a number of variables, and there may be delays such as bad weather affecting air transport, or a package being held for inspection by Customs. ibspot is not liable for any delays in international transportation or customs clearance.

Shipments can be delivered directly to most addresses, except post office boxes. However, in certain remote areas, there may be an additional delivery charge or you may need to pick up your package from the closest service location of ibspot's shipping partner.

Shipping Status: 

As soon as your order ships, you'll receive a shipping confirmation email that includes your tracking number. 

If you don't receive a shipping confirmation email right away, don't worry! We know the delivery date or date range provided at checkout and we'll be sure to deliver the items within that timeframe.

Order changes: 

Please contact our customer support if the order needs to be canceled or modified.

Item not received: 

If you've successfully placed an order and haven't received it yet while the tracking status shows it's delivered. you'd wish to contact the carrier to hunt out your Cover as once the item is Covered we  have control over it (once it’s by the carrier), but if still persists kindly email us 

Damaged Parcel
If your package has been delivered in a PO Box, please note that we are not responsible for any damage that may result (consequences of extreme temperatures, theft, etc.). 

If you have any questions regarding shipping or want to know about the status of an order, please contact us or email to support@ibspot.com.

 

Please Read Our Return & Refund Policy Carefully: 

Return: 

You may return most items within 30 days of delivery for a full refund.

To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.

Several types of goods are exempt from being returned. Perishable goods such as food, flowers, newspapers or magazines cannot be returned. We also do not accept products that are intimate or sanitary goods, hazardous materials, or flammable liquids or gases.

Additional non-returnable items:

  • Gift cards
  • Downloadable software products
  • Some health and personal care items

To complete your return, we require a tracking number, which shows the items which you already returned to us.
There are certain situations where only partial refunds are granted (if applicable)

  • Book with obvious signs of use
  • CD, DVD, VHS tape, software, video game, cassette tape, or vinyl record that has been opened
  • Any item not in its original condition, is damaged or missing parts for reasons not due to our error
  • Any item that is returned more than 30 days after delivery

Items returned to us as a result of our error will receive a full refund,some returns may be subject to a restocking fee of 7% of the total item price, please contact a customer care team member to see if your return is subject. Returns that arrived on time and were as described are subject to a restocking fee.

Items returned to us that were not the result of our error, including items returned to us due to an invalid or incomplete address, will be refunded the original item price less our standard restocking fees.

You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).

If you need to return an item, please Contact Us with your order number and details about the product you would like to return. We will respond quickly with instructions for how to return items from your order.


Shipping Cost

We'll pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.). In other cases, you will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.

Depending on where you live, the time it may take for your exchanged product to reach you, may vary.

If you are shipping an item over $75, you should consider using a trackable shipping service or purchasing shipping insurance. We don’t guarantee that we will receive your returned item.

Refund: 

  • Purchases may be returned within 30 days of the shipping date for a refund. 
  • Refund will be issued to your original form of payment.
  • Refunds for orders purchased with IBSPOT Gift Cards and/or IBSPOT Notes will be issued as a  IBSPOT Gift Card and mailed to the original billing address. Gift cards cannot be redeemed for cash unless  required by law. 

Refund Processing 

• Returns to a IBSPOT store will be refunded to the original form of payment or gift card. • Mail-in returns with our prepaid return label will be refunded back to the original form of payment within 3-5  business days after we receive your return. Please allow 5-7 business days for your return to arrive at our Returns Center. 

• Note: It may take a few days until your bank posts the refund to your account. 

Claims: 

Claims related to the product. Be sure to check the details of your purchase carefully before you make the payment, and  check the contents of the package(s) promptly upon receipt. If you have a problem with the product, visit our Support  Center to find out about return shipping arrangements. 

WHICH CIRCUMSTANCES WE OFFER RETURND & REFUND: 

WRONG PRODUCT: 

If you discover your order is flawed please contact us Mail: support@ibspot.com. With photos of the wrong product we will providing a return shipping label. Once it is tracking we will ship a replacement a product immediately. 

Damages and issues 

Please inspect your order upon reception and contact us immediately if the item is defective,  damaged or if you receive the wrong item, so that we can evaluate the issue and make it right. 

Exceptions / non-returnable items 

Certain types of items cannot be returned, like perishable goods (such as food, flowers, or plants),  custom products (such as special orders or personalized items), and personal care goods (such as  beauty products). We also do not accept returns for hazardous materials, flammable liquids, or  gases. Please get in touch if you have questions or concerns about your specific item. Unfortunately, we cannot accept returns on sale items or gift cards. 

Exchanges 

The fastest way to ensure you get what you want is to return the item you have, and once the return  is accepted, make a separate purchase for the new item. 

Oops!

Sorry, it looks like some products are not available in selected quantity.

OK

delivery truck
Fast Delivery

Global delivery to the US in just days—fast, reliable, and hassle-free service every time!

safe payment
Safe Payment

Pay with the world’s most popular and secure payment methods.

headphone
24/7 Help Center

Round-the-clock assistance for a smooth shopping experience.

mail return
100% Satisfaction Guarantee

30 days return policy if you’re not satisfied with products & services

Subscribe To Our Newsletter

Statements on this website have not been evaluated by the Food and Drug Administration. Products are not intended to diagnose, treat, cure or prevent any disease.