Unbranded ESP8266 ESP-01S 5V WiFi Relay Module Smart Home Phone Remote Control Switch APP
Unbranded ESP8266 ESP-01S 5V WiFi Relay Module Smart Home Phone Remote Control Switch APP
Unbranded ESP8266 ESP-01S 5V WiFi Relay Module Smart Home Phone Remote Control Switch APP
Plus a ESP-01S Module, the intelligent relay module based on ESP-01 WIFI module design, can be used for DIY their own smart switch, you can remotely through the mobile APP control, providing APP and LUA source. Easy to use, easy to use.
Features:
* Module operating voltage: DC 5V
* Relay load capacity:
10A 250VAC
10A 125VAC
10A 30VDC
10A 28VDC
Way of working:
1. The mobile phone is mounted on the WiFi module;
2. The mobile phone and WiFI module are mounted on the same router, and the relay is controlled through the mobile APP; the transmission distance in this mode depends on the signal of the router.
1. The onboard ESP8266 WIFI module has three working modes: STA (client), AP (hotspot), and STA+AP (client + hotspot). Choose the working mode of the WIFI module according to the working mode of the module. .
2. Before using the module, you need to use the serial port debugging software and the USB to TTL module to send serial commands to configure the WIFI module. The RX, TX, and GND pins of the USB to TTL module are connected to the TX, RX, and GND pins on the module (ESP8266 The default baud rate of the module is generally 115200 or 9600. When it is 115200, you need to send AT+CIOBAUD=9600 to set the baud rate to 9600, otherwise the relay cannot be controlled correctly), IN+, IN- connect to 5V power supply.
3. After the configuration is complete (note that the 5V power supply cannot be unplugged, because some parameters of the WIFI module cannot be saved after the power is off), install the "TCP connection" APP on the Android phone, open it and click "Connect", enter the IP address and port number , Click "connect", then click "switch" in the interface, long press the gray square in the interface to add a serial port command, enter the name and content of the command (when the command content is A00101A2, turn on the relay; when the command content is A00100A1, turn off the relay) And choose to send in hexadecimal format, and then click the corresponding box to control the switch of the relay. The specific configuration method of the WIFI module is as follows:
Working method 1: When the mobile phone is mounted on the WiFi module, the commands are sent in the following order:
1. AT+CWMODE=2, namely select AP mode;
2. AT+RST, reset;
3. AT+CIPMUX=1, open multiple connections;
4. AT+CIPSERVER=1,8080, configure the TCP server and set the port number;
5. AT+CIOBAUD=9600, set the baud rate to 9600. (Because the relay control chip works at the baud rate 9600)
6. AT+CIFSR, check the IP address in AP mode, for example: APIP, "192.168.4.1";
7. The WIFI signal whose mobile phone connection name starts with AI-THINKER or ESP8266;
8. Enter the address and port in the "TCP connection" APP, such as 192.168.4.1 and 8080;
9. Click the corresponding gray square to control the relay.
Working mode 2: When the mobile phone and the WiFI module are simultaneously mounted on the same router, the commands are sent in the following order:
1. AT+CWMODE=1, that is, select STA mode;
2. AT+RST, reset;
3. AT+CWLAP, list available WIFI nearby;
4. AT+CWJAP=,, let the WiFi module connect to the router, where ssid
And password are the WIFI name and password, for example: AT+CWJAP="TP-LINK","123456";
5. AT+CIPMUX=1, open multiple connections;
6. AT+CIPSERVER=1,8080, configure the TCP server and set the port number;
7. AT+CIFSR, check the IP address in STA mode, for example: STAIP, "192.168.1.102";
8. Connect the mobile phone to the router;
9. Enter the address and port in the "TCP connection" APP, for example: 192.168.1.102 and 8080;
10. Click the corresponding gray square to control the relay.
Tips:
1. The STA+AP mode of the WIFI module is applicable to the above two working methods.
2. The ESP8266 module has a timeout mechanism. When the phone does not send instructions to the module for a period of time (default 180S), the module will kick the phone off. You can send AT+CIPSTO= on the computer to modify this time ( The time range is 0-7200), such as: AT+CIPSTO=3600.
3. When the WIFI module on the module is unplugged, the RX, TX and GND pins of the USB to TTL module are connected to the RX, TX and GND pins on the module respectively, and IN+ and IN- are connected to the 5V power supply, and the module can be used as A USB relay is used, with strong scalability
Package Included:
1 x ESP8266 ESP-01S 5V WiFi Relay Module
Instructions/schematic are NOT included. We don't provide technical assistance please make sure that you are familiar with the product before purchasing.
| Brand: | Unbranded |
|---|---|
| Isin: | IL5W76LPMAO5 |
Out of Stock
In Stock
Backordered
Out of Stock
IBspot Buyer Protection
Shop confidently on IBspot, receive your item as described or your money back for eligible orders. Learn Program Terms
GUARANTEED SAFE CHECKOUT
-
MONEY BACK GUARANTEE
30 days money back guarantee, no additional fee charged.
-
EXCELLENT SUPPORT
We provide 24/7 online customer support via email.
-
Fast Shipping
One week domestic shipping. Global delivery to the US in 2 weeks.
Plus a ESP-01S Module, the intelligent relay module based on ESP-01 WIFI module design, can be used for DIY their own smart switch, you can remotely through the mobile APP control, providing APP and LUA source. Easy to use, easy to use.
Features:
* Module operating voltage: DC 5V
* Relay load capacity:
10A 250VAC
10A 125VAC
10A 30VDC
10A 28VDC
Way of working:
1. The mobile phone is mounted on the WiFi module;
2. The mobile phone and WiFI module are mounted on the same router, and the relay is controlled through the mobile APP; the transmission distance in this mode depends on the signal of the router.
1. The onboard ESP8266 WIFI module has three working modes: STA (client), AP (hotspot), and STA+AP (client + hotspot). Choose the working mode of the WIFI module according to the working mode of the module. .
2. Before using the module, you need to use the serial port debugging software and the USB to TTL module to send serial commands to configure the WIFI module. The RX, TX, and GND pins of the USB to TTL module are connected to the TX, RX, and GND pins on the module (ESP8266 The default baud rate of the module is generally 115200 or 9600. When it is 115200, you need to send AT+CIOBAUD=9600 to set the baud rate to 9600, otherwise the relay cannot be controlled correctly), IN+, IN- connect to 5V power supply.
3. After the configuration is complete (note that the 5V power supply cannot be unplugged, because some parameters of the WIFI module cannot be saved after the power is off), install the "TCP connection" APP on the Android phone, open it and click "Connect", enter the IP address and port number , Click "connect", then click "switch" in the interface, long press the gray square in the interface to add a serial port command, enter the name and content of the command (when the command content is A00101A2, turn on the relay; when the command content is A00100A1, turn off the relay) And choose to send in hexadecimal format, and then click the corresponding box to control the switch of the relay. The specific configuration method of the WIFI module is as follows:
Working method 1: When the mobile phone is mounted on the WiFi module, the commands are sent in the following order:
1. AT+CWMODE=2, namely select AP mode;
2. AT+RST, reset;
3. AT+CIPMUX=1, open multiple connections;
4. AT+CIPSERVER=1,8080, configure the TCP server and set the port number;
5. AT+CIOBAUD=9600, set the baud rate to 9600. (Because the relay control chip works at the baud rate 9600)
6. AT+CIFSR, check the IP address in AP mode, for example: APIP, "192.168.4.1";
7. The WIFI signal whose mobile phone connection name starts with AI-THINKER or ESP8266;
8. Enter the address and port in the "TCP connection" APP, such as 192.168.4.1 and 8080;
9. Click the corresponding gray square to control the relay.
Working mode 2: When the mobile phone and the WiFI module are simultaneously mounted on the same router, the commands are sent in the following order:
1. AT+CWMODE=1, that is, select STA mode;
2. AT+RST, reset;
3. AT+CWLAP, list available WIFI nearby;
4. AT+CWJAP=,, let the WiFi module connect to the router, where ssid
And password are the WIFI name and password, for example: AT+CWJAP="TP-LINK","123456";
5. AT+CIPMUX=1, open multiple connections;
6. AT+CIPSERVER=1,8080, configure the TCP server and set the port number;
7. AT+CIFSR, check the IP address in STA mode, for example: STAIP, "192.168.1.102";
8. Connect the mobile phone to the router;
9. Enter the address and port in the "TCP connection" APP, for example: 192.168.1.102 and 8080;
10. Click the corresponding gray square to control the relay.
Tips:
1. The STA+AP mode of the WIFI module is applicable to the above two working methods.
2. The ESP8266 module has a timeout mechanism. When the phone does not send instructions to the module for a period of time (default 180S), the module will kick the phone off. You can send AT+CIPSTO= on the computer to modify this time ( The time range is 0-7200), such as: AT+CIPSTO=3600.
3. When the WIFI module on the module is unplugged, the RX, TX and GND pins of the USB to TTL module are connected to the RX, TX and GND pins on the module respectively, and IN+ and IN- are connected to the 5V power supply, and the module can be used as A USB relay is used, with strong scalability
Package Included:
1 x ESP8266 ESP-01S 5V WiFi Relay Module
Instructions/schematic are NOT included. We don't provide technical assistance please make sure that you are familiar with the product before purchasing.
- Brand: Unbranded
- Current Type: DC
- Type: WiFi Relay Module
- Model: ESP8266 ESP-01S
- Features: App-Controlled
- MPN: Does not apply
- Smart Home Protocol: Wi-Fi
- Application: Electronics
- UPC: Does not apply
Processing Time
- We process and ship orders Monday through Friday, excluding holidays.
- Most orders are processed within 1–3 business days, depending on product availability.
- Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.
Shipping Coverage
We currently ship to addresses within the United States only.
Products may ship from:
- Our U.S. warehouses, or
- Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).
Each product page clearly displays the “Ships From” location before checkout.
Shipping Methods & Estimated Delivery
| Shipping Method | Estimated Delivery | Cost |
|---|---|---|
| Free Shipping (US) | 5–10 business days | Free, available on eligible items |
| Standard Shipping (US to US by Item) | 5–10 business days | $6.50 for the first item, $2.00 each additional |
| Standard Shipping (From US Warehouse by Weight) | 3–7 business days | Starts at $6.50, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb. |
| Extended Delivery (Ships from Overseas Warehouse) | 10–20 business days | $14.50 for the first item, $2.00 each additional |
Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.
Free Shipping
We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout.
Carriers
We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.
Import Duties & Taxes
All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.
Tracking & Notifications
Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.
You can track your shipment anytime using the Track Your Order page on our website.
Order Changes & Cancellations
If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.
Contact: support@ibspot.com
Item Not Received
If your tracking number shows “Delivered” but you haven’t received your package:
- Check with your local USPS or UPS office.
- Confirm that the shipping address provided was correct.
- If the issue remains unresolved, contact support@ibspot.com for assistance.
Damaged or Lost Parcels
If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.
Customer Support
For any questions about shipping, tracking, or delivery, our customer support team is here to help.
Email: support@ibspot.com
We’re always happy to help.
Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.
Order Cancellation Policy
Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.
How to Request a Cancellation
You can contact us through:
- Email: support@ibspot.com
- Contact Form: Submit a request through our Contact Us page
Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.
Return Policy
We accept returns for most items within 30 days of delivery for a full refund.
To be eligible for a return:
- The item must be unused, in the same condition as received, and in its original packaging.
- A tracking number must be provided to confirm the return shipment.
Non-Returnable Items
Certain products cannot be returned, including:
- Perishable goods (for example, food, flowers, newspapers, magazines)
- Intimate or sanitary goods
- Hazardous materials or flammable liquids/gases
- Gift cards
- Downloadable software
- Some health and personal care items
Partial Refunds (If Applicable)
Partial refunds may be granted in specific situations, such as:
- Books with obvious signs of use
- Opened CDs, DVDs, software, or vinyl records
- Items not in their original condition, damaged, or missing parts not due to our error
- Items returned more than 30 days after delivery
How to Return an Item
To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.
Shipping Cost for Returns
Please contact us before returning any item.
We will provide a free return shipping label.
If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.
For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.
Refund Processing
Once your return is received and inspected:
- In-store returns are refunded to the original form of payment or issued as a gift card.
- Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.
Please allow:
- 5–7 business days for the return to reach our Returns Center.
- An additional 3–10 business days for your bank to post the refund to your account.
Damages, Issues & Claims
Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.
Product Claims
Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.
Exchanges
We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.
Return Address
IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States
Customer Support
Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.
Email: support@ibspot.com
Contact Form: Contact Us page
Oops!
Sorry, it looks like some products are not available in selected quantity.