Unbranded Gerstley Borate, contains Calcium Borate , 3 , pound
Unbranded Gerstley Borate, contains Calcium Borate , 3 , pound
Unbranded Gerstley Borate, contains Calcium Borate , 3 , pound
Gerstley Borate, also called Calcium Borate, similar to Colemanite, 3, pound , other weights available of course
No common natural material comes anywhere close to melting like Gerstley Borate (GB). It begins to melt between 1550F and 1600F and is a clear amber glass by 1750F and ultraclear and glossy by cone 06 (Ulexite melts better but it is not commonly in use in ceramics). It has thus been a staple among potters for many years. 50% can be found in many cone 06-02 glazes, up to 30% in cone 6 glazes. Gerstley Borate is also very plastic and thus suspends and hardens glazes as they dry. In fact, few clays have the plasticity and the ability to retain water that GB has. A GB slurry can take many hours to dewater on a plaster batt, even in a very think layer. Thus it is common to find Gerstley Borate based recipes having no clay content.
GB natural source of boron that was mined in southern California for many years. Mineralogically it is a combination of colemanite, ulexite and high plasticity clay (likely hectorite). The melting behavior of ulexite and colemanite is quite different, the unusual early melting behavior GB exhibits this, it suddenly implodes to a brown opaque melt (because of the earlier fluxing of ulexite) which later turns transparent (when the colemanite joins in).
Since GB glazes melt well and are so easy to make, most people have overlooked issues surrounding its use. Glazes with high GB content that host potentially toxic metallic colorants or other materials are often assumed to be non-leachable because they melt well (where as, in fact, they may have an unbalanced chemistry). Gerstley Borate has almost no Al2O3, this is a problem because glazes need it and Al2O3 is normally sourced from clays, especially kaolin. But since GB is so plastic, adding more plastic materials to a glaze causes excessive drying shrinkage (producing cracks and ultimately crawling). One solution is to use calcined kaolin. Another option is to source Al2O3 from feldspar, however to get enough to create a stable glass oversupplies KNaO and causes crazing.
High GB glazes often have alot of micro-bubbles in the fired glass and micro-dimples on the fired glaze surface (most visible in transparents). Slurries also tend to flocculate and gel causing problems with glaze application, drying and adhesion. Because this material melts so well, potters who use it have been willing to endure alot of these issues. One common low to middle fire transparent, for example, has 50% GB and adds 30% kaolin to that, producing a slurry the dries even more slowly, gels quite badly and shrinks considerably as it dries.
The mine was closed in 2000 and remaining stocks were to be depleted in 2-3 years. There was alarm across the ceramic community in North America leading up to and after the closure (because Gerstley Borate formed the basis of so many glazes). However in June 2011, the supplier, Lagunaclay.com, announced that there was again a large supply still available. For the best information on substitutes visit gerstleyborate.com. There is a page on the site dedicated to understanding what Gerstley Borate was chemically, physically and mineralogically. There are a number of materials that have been developed as substitutes over the years, these are outlined at the website also.
However the best approach is to finding an alternative is the use of ceramic chemistry on a glaze-by-glaze basis (to substitute other materials). In many cases, it is better to use frits to supply the CaO and B2O3, they are less volatile, more consistent and reliable and do not flocculate or gel the glaze as Gerstley Borate does. In cases where frits cannot deliver the needed chemistry, Ulexite can be employed.
Prior to, and during the decade of uncertainty about the future of this material, the supplier did not provide updated chemistry information. It was during this time that many companies promoted substitutes. We rationalized it (as explained at http://gerstleyborate.com) as 24% CaO, 4% MgO, 0.5% K2O, 4% Na2O, 2% Al2O3, 25% B2O3, 14% SiO2, 0.5% Fe2O3 and 14% 26% LOI. In June 2011 we changed the chemistry provided here to the one provided by Laguna on their website (rounded to 1 decimal). This new chemistry has more B2O3 and less CaO (other oxide amounts are fairly similar).
............................................................................................................................................................................. Testing Policy: Testing of raw materials should be an integral part of ceramic or glass making / manufacturing. Upon receipt of any new material, we strongly recommend that you test the material. "Paul Brown Studio Arts and Supplies" . has no control over either the variations that may occur in the natural materials or their application. All products are supplied as is from the manufacturer. No additional processing or technical support is supplied. Therefore, our products are sold with the understanding that the user is solely responsible for determining suitability for any purpose and the results obtained. There are no warranties expressed or implied, regarding the user’s finished product or results. Return Policy: Returns are accepted 14 days from date of shipment only if the box has not been opened. Furthermore, the labeling and packaging must be in its original condition. If the box has been opened then that will exempt it from being returned. All returns must be authorized by "Paul Brown Studio Arts and Supplies". There is a 25% restocking fee for all returns plus the price for the return shipping charges. No refund will be granted if returned without prior authorization from "Paul Brown Studio Arts and Supplies". No refund will be granted if shipment is refused by buyer or an incorrect address is given (change of address once shipped is prohibited by our shipping carriers). We will be happy to answer any questions regarding our products prior to ordering to prevent a return situation for you.
Return Policy: No Returns
No common natural material comes anywhere close to melting like Gerstley Borate (GB). It begins to melt between 1550F and 1600F and is a clear amber glass by 1750F and ultraclear and glossy by cone 06 (Ulexite melts better but it is not commonly in use in ceramics). It has thus been a staple among potters for many years. 50% can be found in many cone 06-02 glazes, up to 30% in cone 6 glazes. Gerstley Borate is also very plastic and thus suspends and hardens glazes as they dry. In fact, few clays have the plasticity and the ability to retain water that GB has. A GB slurry can take many hours to dewater on a plaster batt, even in a very think layer. Thus it is common to find Gerstley Borate based recipes having no clay content.
GB natural source of boron that was mined in southern California for many years. Mineralogically it is a combination of colemanite, ulexite and high plasticity clay (likely hectorite). The melting behavior of ulexite and colemanite is quite different, the unusual early melting behavior GB exhibits this, it suddenly implodes to a brown opaque melt (because of the earlier fluxing of ulexite) which later turns transparent (when the colemanite joins in).
Since GB glazes melt well and are so easy to make, most people have overlooked issues surrounding its use. Glazes with high GB content that host potentially toxic metallic colorants or other materials are often assumed to be non-leachable because they melt well (where as, in fact, they may have an unbalanced chemistry). Gerstley Borate has almost no Al2O3, this is a problem because glazes need it and Al2O3 is normally sourced from clays, especially kaolin. But since GB is so plastic, adding more plastic materials to a glaze causes excessive drying shrinkage (producing cracks and ultimately crawling). One solution is to use calcined kaolin. Another option is to source Al2O3 from feldspar, however to get enough to create a stable glass oversupplies KNaO and causes crazing.
High GB glazes often have alot of micro-bubbles in the fired glass and micro-dimples on the fired glaze surface (most visible in transparents). Slurries also tend to flocculate and gel causing problems with glaze application, drying and adhesion. Because this material melts so well, potters who use it have been willing to endure alot of these issues. One common low to middle fire transparent, for example, has 50% GB and adds 30% kaolin to that, producing a slurry the dries even more slowly, gels quite badly and shrinks considerably as it dries.
The mine was closed in 2000 and remaining stocks were to be depleted in 2-3 years. There was alarm across the ceramic community in North America leading up to and after the closure (because Gerstley Borate formed the basis of so many glazes). However in June 2011, the supplier, Lagunaclay.com, announced that there was again a large supply still available. For the best information on substitutes visit gerstleyborate.com. There is a page on the site dedicated to understanding what Gerstley Borate was chemically, physically and mineralogically. There are a number of materials that have been developed as substitutes over the years, these are outlined at the website also.
However the best approach is to finding an alternative is the use of ceramic chemistry on a glaze-by-glaze basis (to substitute other materials). In many cases, it is better to use frits to supply the CaO and B2O3, they are less volatile, more consistent and reliable and do not flocculate or gel the glaze as Gerstley Borate does. In cases where frits cannot deliver the needed chemistry, Ulexite can be employed.
Prior to, and during the decade of uncertainty about the future of this material, the supplier did not provide updated chemistry information. It was during this time that many companies promoted substitutes. We rationalized it (as explained at http://gerstleyborate.com) as 24% CaO, 4% MgO, 0.5% K2O, 4% Na2O, 2% Al2O3, 25% B2O3, 14% SiO2, 0.5% Fe2O3 and 14% 26% LOI. In June 2011 we changed the chemistry provided here to the one provided by Laguna on their website (rounded to 1 decimal). This new chemistry has more B2O3 and less CaO (other oxide amounts are fairly similar).
............................................................................................................................................................................. Testing Policy: Testing of raw materials should be an integral part of ceramic or glass making / manufacturing. Upon receipt of any new material, we strongly recommend that you test the material. "Paul Brown Studio Arts and Supplies" . has no control over either the variations that may occur in the natural materials or their application. All products are supplied as is from the manufacturer. No additional processing or technical support is supplied. Therefore, our products are sold with the understanding that the user is solely responsible for determining suitability for any purpose and the results obtained. There are no warranties expressed or implied, regarding the user’s finished product or results. Return Policy: Returns are accepted 14 days from date of shipment only if the box has not been opened. Furthermore, the labeling and packaging must be in its original condition. If the box has been opened then that will exempt it from being returned. All returns must be authorized by "Paul Brown Studio Arts and Supplies". There is a 25% restocking fee for all returns plus the price for the return shipping charges. No refund will be granted if returned without prior authorization from "Paul Brown Studio Arts and Supplies". No refund will be granted if shipment is refused by buyer or an incorrect address is given (change of address once shipped is prohibited by our shipping carriers). We will be happy to answer any questions regarding our products prior to ordering to prevent a return situation for you.
Return Policy: No Returns
| Brand: | Unbranded |
|---|---|
| Isin: | ILUTBTGH6FLP |
Out of Stock
In Stock
Backordered
Out of Stock
IBspot Buyer Protection
Shop confidently on IBspot, receive your item as described or your money back for eligible orders. Learn Program Terms
GUARANTEED SAFE CHECKOUT
-
MONEY BACK GUARANTEE
30 days money back guarantee, no additional fee charged.
-
EXCELLENT SUPPORT
We provide 24/7 online customer support via email.
-
Fast Shipping
One week domestic shipping. Global delivery to the US in 2 weeks.
Gerstley Borate, also called Calcium Borate, similar to Colemanite, 3, pound , other weights available of course
No common natural material comes anywhere close to melting like Gerstley Borate (GB). It begins to melt between 1550F and 1600F and is a clear amber glass by 1750F and ultraclear and glossy by cone 06 (Ulexite melts better but it is not commonly in use in ceramics). It has thus been a staple among potters for many years. 50% can be found in many cone 06-02 glazes, up to 30% in cone 6 glazes. Gerstley Borate is also very plastic and thus suspends and hardens glazes as they dry. In fact, few clays have the plasticity and the ability to retain water that GB has. A GB slurry can take many hours to dewater on a plaster batt, even in a very think layer. Thus it is common to find Gerstley Borate based recipes having no clay content.
GB natural source of boron that was mined in southern California for many years. Mineralogically it is a combination of colemanite, ulexite and high plasticity clay (likely hectorite). The melting behavior of ulexite and colemanite is quite different, the unusual early melting behavior GB exhibits this, it suddenly implodes to a brown opaque melt (because of the earlier fluxing of ulexite) which later turns transparent (when the colemanite joins in).
Since GB glazes melt well and are so easy to make, most people have overlooked issues surrounding its use. Glazes with high GB content that host potentially toxic metallic colorants or other materials are often assumed to be non-leachable because they melt well (where as, in fact, they may have an unbalanced chemistry). Gerstley Borate has almost no Al2O3, this is a problem because glazes need it and Al2O3 is normally sourced from clays, especially kaolin. But since GB is so plastic, adding more plastic materials to a glaze causes excessive drying shrinkage (producing cracks and ultimately crawling). One solution is to use calcined kaolin. Another option is to source Al2O3 from feldspar, however to get enough to create a stable glass oversupplies KNaO and causes crazing.
High GB glazes often have alot of micro-bubbles in the fired glass and micro-dimples on the fired glaze surface (most visible in transparents). Slurries also tend to flocculate and gel causing problems with glaze application, drying and adhesion. Because this material melts so well, potters who use it have been willing to endure alot of these issues. One common low to middle fire transparent, for example, has 50% GB and adds 30% kaolin to that, producing a slurry the dries even more slowly, gels quite badly and shrinks considerably as it dries.
The mine was closed in 2000 and remaining stocks were to be depleted in 2-3 years. There was alarm across the ceramic community in North America leading up to and after the closure (because Gerstley Borate formed the basis of so many glazes). However in June 2011, the supplier, Lagunaclay.com, announced that there was again a large supply still available. For the best information on substitutes visit gerstleyborate.com. There is a page on the site dedicated to understanding what Gerstley Borate was chemically, physically and mineralogically. There are a number of materials that have been developed as substitutes over the years, these are outlined at the website also.
However the best approach is to finding an alternative is the use of ceramic chemistry on a glaze-by-glaze basis (to substitute other materials). In many cases, it is better to use frits to supply the CaO and B2O3, they are less volatile, more consistent and reliable and do not flocculate or gel the glaze as Gerstley Borate does. In cases where frits cannot deliver the needed chemistry, Ulexite can be employed.
Prior to, and during the decade of uncertainty about the future of this material, the supplier did not provide updated chemistry information. It was during this time that many companies promoted substitutes. We rationalized it (as explained at http://gerstleyborate.com) as 24% CaO, 4% MgO, 0.5% K2O, 4% Na2O, 2% Al2O3, 25% B2O3, 14% SiO2, 0.5% Fe2O3 and 14% 26% LOI. In June 2011 we changed the chemistry provided here to the one provided by Laguna on their website (rounded to 1 decimal). This new chemistry has more B2O3 and less CaO (other oxide amounts are fairly similar).
............................................................................................................................................................................. Testing Policy: Testing of raw materials should be an integral part of ceramic or glass making / manufacturing. Upon receipt of any new material, we strongly recommend that you test the material. "Paul Brown Studio Arts and Supplies" . has no control over either the variations that may occur in the natural materials or their application. All products are supplied as is from the manufacturer. No additional processing or technical support is supplied. Therefore, our products are sold with the understanding that the user is solely responsible for determining suitability for any purpose and the results obtained. There are no warranties expressed or implied, regarding the user’s finished product or results. Return Policy: Returns are accepted 14 days from date of shipment only if the box has not been opened. Furthermore, the labeling and packaging must be in its original condition. If the box has been opened then that will exempt it from being returned. All returns must be authorized by "Paul Brown Studio Arts and Supplies". There is a 25% restocking fee for all returns plus the price for the return shipping charges. No refund will be granted if returned without prior authorization from "Paul Brown Studio Arts and Supplies". No refund will be granted if shipment is refused by buyer or an incorrect address is given (change of address once shipped is prohibited by our shipping carriers). We will be happy to answer any questions regarding our products prior to ordering to prevent a return situation for you.
Return Policy: No Returns
No common natural material comes anywhere close to melting like Gerstley Borate (GB). It begins to melt between 1550F and 1600F and is a clear amber glass by 1750F and ultraclear and glossy by cone 06 (Ulexite melts better but it is not commonly in use in ceramics). It has thus been a staple among potters for many years. 50% can be found in many cone 06-02 glazes, up to 30% in cone 6 glazes. Gerstley Borate is also very plastic and thus suspends and hardens glazes as they dry. In fact, few clays have the plasticity and the ability to retain water that GB has. A GB slurry can take many hours to dewater on a plaster batt, even in a very think layer. Thus it is common to find Gerstley Borate based recipes having no clay content.
GB natural source of boron that was mined in southern California for many years. Mineralogically it is a combination of colemanite, ulexite and high plasticity clay (likely hectorite). The melting behavior of ulexite and colemanite is quite different, the unusual early melting behavior GB exhibits this, it suddenly implodes to a brown opaque melt (because of the earlier fluxing of ulexite) which later turns transparent (when the colemanite joins in).
Since GB glazes melt well and are so easy to make, most people have overlooked issues surrounding its use. Glazes with high GB content that host potentially toxic metallic colorants or other materials are often assumed to be non-leachable because they melt well (where as, in fact, they may have an unbalanced chemistry). Gerstley Borate has almost no Al2O3, this is a problem because glazes need it and Al2O3 is normally sourced from clays, especially kaolin. But since GB is so plastic, adding more plastic materials to a glaze causes excessive drying shrinkage (producing cracks and ultimately crawling). One solution is to use calcined kaolin. Another option is to source Al2O3 from feldspar, however to get enough to create a stable glass oversupplies KNaO and causes crazing.
High GB glazes often have alot of micro-bubbles in the fired glass and micro-dimples on the fired glaze surface (most visible in transparents). Slurries also tend to flocculate and gel causing problems with glaze application, drying and adhesion. Because this material melts so well, potters who use it have been willing to endure alot of these issues. One common low to middle fire transparent, for example, has 50% GB and adds 30% kaolin to that, producing a slurry the dries even more slowly, gels quite badly and shrinks considerably as it dries.
The mine was closed in 2000 and remaining stocks were to be depleted in 2-3 years. There was alarm across the ceramic community in North America leading up to and after the closure (because Gerstley Borate formed the basis of so many glazes). However in June 2011, the supplier, Lagunaclay.com, announced that there was again a large supply still available. For the best information on substitutes visit gerstleyborate.com. There is a page on the site dedicated to understanding what Gerstley Borate was chemically, physically and mineralogically. There are a number of materials that have been developed as substitutes over the years, these are outlined at the website also.
However the best approach is to finding an alternative is the use of ceramic chemistry on a glaze-by-glaze basis (to substitute other materials). In many cases, it is better to use frits to supply the CaO and B2O3, they are less volatile, more consistent and reliable and do not flocculate or gel the glaze as Gerstley Borate does. In cases where frits cannot deliver the needed chemistry, Ulexite can be employed.
Prior to, and during the decade of uncertainty about the future of this material, the supplier did not provide updated chemistry information. It was during this time that many companies promoted substitutes. We rationalized it (as explained at http://gerstleyborate.com) as 24% CaO, 4% MgO, 0.5% K2O, 4% Na2O, 2% Al2O3, 25% B2O3, 14% SiO2, 0.5% Fe2O3 and 14% 26% LOI. In June 2011 we changed the chemistry provided here to the one provided by Laguna on their website (rounded to 1 decimal). This new chemistry has more B2O3 and less CaO (other oxide amounts are fairly similar).
............................................................................................................................................................................. Testing Policy: Testing of raw materials should be an integral part of ceramic or glass making / manufacturing. Upon receipt of any new material, we strongly recommend that you test the material. "Paul Brown Studio Arts and Supplies" . has no control over either the variations that may occur in the natural materials or their application. All products are supplied as is from the manufacturer. No additional processing or technical support is supplied. Therefore, our products are sold with the understanding that the user is solely responsible for determining suitability for any purpose and the results obtained. There are no warranties expressed or implied, regarding the user’s finished product or results. Return Policy: Returns are accepted 14 days from date of shipment only if the box has not been opened. Furthermore, the labeling and packaging must be in its original condition. If the box has been opened then that will exempt it from being returned. All returns must be authorized by "Paul Brown Studio Arts and Supplies". There is a 25% restocking fee for all returns plus the price for the return shipping charges. No refund will be granted if returned without prior authorization from "Paul Brown Studio Arts and Supplies". No refund will be granted if shipment is refused by buyer or an incorrect address is given (change of address once shipped is prohibited by our shipping carriers). We will be happy to answer any questions regarding our products prior to ordering to prevent a return situation for you.
Return Policy: No Returns
Condition
New: A brand-new, unused, unopened, undamaged item (including handmade items). See the seller's ...
Brand
Unbranded
MPN
Does Not Apply
Country/Region of Manufacture
United States
UPC
Does not apply
Processing Time
- We process and ship orders Monday through Friday, excluding holidays.
- Most orders are processed within 1–3 business days, depending on product availability.
- Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.
Shipping Coverage
We currently ship to addresses within the United States only.
Products may ship from:
- Our U.S. warehouses, or
- Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).
Each product page clearly displays the “Ships From” location before checkout.
Shipping Methods & Estimated Delivery
| Shipping Method | Estimated Delivery | Cost |
|---|---|---|
| Free Shipping (US) | 5–10 business days | Free, available on eligible items |
| Standard Shipping (US to US by Item) | 5–10 business days | $6.50 for the first item, $2.00 each additional |
| Standard Shipping (From US Warehouse by Weight) | 3–7 business days | Starts at $6.50, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb. |
| Extended Delivery (Ships from Overseas Warehouse) | 10–20 business days | $14.50 for the first item, $2.00 each additional |
Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.
Free Shipping
We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout.
Carriers
We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.
Import Duties & Taxes
All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.
Tracking & Notifications
Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.
You can track your shipment anytime using the Track Your Order page on our website.
Order Changes & Cancellations
If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.
Contact: support@ibspot.com
Item Not Received
If your tracking number shows “Delivered” but you haven’t received your package:
- Check with your local USPS or UPS office.
- Confirm that the shipping address provided was correct.
- If the issue remains unresolved, contact support@ibspot.com for assistance.
Damaged or Lost Parcels
If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.
Customer Support
For any questions about shipping, tracking, or delivery, our customer support team is here to help.
Email: support@ibspot.com
We’re always happy to help.
Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.
Order Cancellation Policy
Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.
How to Request a Cancellation
You can contact us through:
- Email: support@ibspot.com
- Contact Form: Submit a request through our Contact Us page
Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.
Return Policy
We accept returns for most items within 30 days of delivery for a full refund.
To be eligible for a return:
- The item must be unused, in the same condition as received, and in its original packaging.
- A tracking number must be provided to confirm the return shipment.
Non-Returnable Items
Certain products cannot be returned, including:
- Perishable goods (for example, food, flowers, newspapers, magazines)
- Intimate or sanitary goods
- Hazardous materials or flammable liquids/gases
- Gift cards
- Downloadable software
- Some health and personal care items
Partial Refunds (If Applicable)
Partial refunds may be granted in specific situations, such as:
- Books with obvious signs of use
- Opened CDs, DVDs, software, or vinyl records
- Items not in their original condition, damaged, or missing parts not due to our error
- Items returned more than 30 days after delivery
How to Return an Item
To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.
Shipping Cost for Returns
Please contact us before returning any item.
We will provide a free return shipping label.
If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.
For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.
Refund Processing
Once your return is received and inspected:
- In-store returns are refunded to the original form of payment or issued as a gift card.
- Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.
Please allow:
- 5–7 business days for the return to reach our Returns Center.
- An additional 3–10 business days for your bank to post the refund to your account.
Damages, Issues & Claims
Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.
Product Claims
Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.
Exchanges
We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.
Return Address
IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States
Customer Support
Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.
Email: support@ibspot.com
Contact Form: Contact Us page
Oops!
Sorry, it looks like some products are not available in selected quantity.