V & S Package of 3 V&S 1077 Super Spray Adhesive Fine Mist spray Pattern
V & S Package of 3 V&S 1077 Super Spray Adhesive Fine Mist spray Pattern
V & S Package of 3 V&S 1077 Super Spray Adhesive Fine Mist spray Pattern
ProductDescription
PACKAGE OF THREE
#1077 Super Spray Adhesive is an extremely versatile industrial grade aerosol adhesive. Securely bonds most lightweight materials such as decorative foils, films and fabrics and fiberglass insulation.
Outstanding Features:
- Fine Mist Spray Pattern
- Strong one-surface bonds
- Fast, aggressive tack
Long bonding range
- 16 oz. net wt.aerosol can / 464 g
V&S #1077 Super Spray Industrial Grade Adhesive. The multipurpose formulation combines a uniform misting spray pattern with super high solids to create a fast tacking and high bond strength product capable of handling virtually any light or heavy duty job. Applications for this product can be found throughout general industry for bonding fabrics, plastics, felt, cork, foam, insulation, paper, corrugated, wood, most metals, and more. Even with the super high solids, this product has a conveniently open time to allow for repositioning and adjustment when affixing surfaces to be bonded. Also featured is a moderate flow rate spray valve to provide overspray control in a mist adhesive. The product has an economical coverage rate and is ideally suited for both temporary or permanent bonds. The one product that is truly all purpose, it is made without using chlorinated solvents, ozone depleters, or carcinogens.
Markets. This product is one of the most versatile adhesives available. Uses include general industry for temporary affixing templates or forms, permanent bonding labels or graphics, arts and crafts, screen-printing T-shirts, affixing materials during stitching or embroidery, upholstery/fabric tacking and temporary affixing of paper masking.
Instructions. Shake can well before using. Hold can 6" to 8" away from item and spray. Make bond while adhesive is still wet and tacky.
PERMANENT BONDS. For porous materials such as paper or cardboard, coat one surface only. Bonds should be made while adhesive is wet and tacky. For non-porous surfaces such as metal, foil, plastic, etc., coat both surfaces with adhesive. Allow at least one minute drying time before bonding.
NON-PERMANENT BONDS. Apply a light coat of adhesive to one surface. Allow at least 3 minutes drying time before bonding. Surface can then be separated when desired.
How to Use Spray Adhesives
Working with spray adhesive can be a trickymess. Here are some helpful tips and techniques from glueplace.com that willmake using spray adhesive easier, cleaner and enable you to get the most out ofthe product.
Spray adhesives are one of the most useful and versatile tools for homedecorating, crafting, construction and quick household fixes. It is easy touse, dries quickly and holds well.
Basic Directions
1. Useonly in a well-ventilated area. 2. Make sure surfaces are free of dirt,grease and moisture. 3. Shake can well before use. 4. If possible, mask off any area notapplied with adhesive (this will also help in clean-up). 5. Hold can uprightabout 6" to 8" away from surface. 6. Test spray pattern in a protected areaaway from project surfaces. 7. Spray with a light, uniform coat. 8. When can I make thebond? We suggest that you use your fingersif it feels sticky, but doesn't transfer to your fingers, it's ready to bond. 9. To help preventclogged nozzles after use, tip can upside down and spray until adhesive doesnot emit.
General Techniques
Use at room temperature. All adhesives work best at room temperature(60°-80°).
Keep steady.A light but thorough coating of spray adhesive works best and two coats aremuch better than one heavy coat.
Keep your distance.Hold the can upright about 6" to 8" from the surface while spraying.Spraying too closely can wet the surface and cause puddling, which can extenddrying times, weaken the bond, and affect the look of the finished project.
Protect from overspray.Just use a cardboard box, mask off surfaces with tape or paper, or cover thework surface with newspaper or other disposable material.
Save the nozzles.Nozzles on spray adhesives can get clogged. Soaking clogged nozzles inturpentine or mineral spirits to loosen the adhesive. Also, save good nozzlesfrom empty cans to use as replacements.
Avoid bubbles.A good way to help eliminate trapped bubbles when using spray adhesive to gluesurfaces is to apply pressure starting from the center of the materialand then carefully working outward.
Purge the can. Toextend the life of the can of spray adhesive, turn it upside down when theproject is complete. Spray into a safe location (like an empty box) until theglue stops coming out.
Adhesive Solutions, Inc. has established a reputation with our customers of providing fast, reliable, and professional service. The high level of responsiveness to our customers' needs – keep them coming back.
| Brand: | V & S |
|---|---|
| Isin: | ILMWAXR44L1D |
Out of Stock
In Stock
Backordered
Out of Stock
IBspot Buyer Protection
Shop confidently on IBspot, receive your item as described or your money back for eligible orders. Learn Program Terms
GUARANTEED SAFE CHECKOUT
-
MONEY BACK GUARANTEE
30 days money back guarantee, no additional fee charged.
-
EXCELLENT SUPPORT
We provide 24/7 online customer support via email.
-
Fast Shipping
One week domestic shipping. Global delivery to the US in 2 weeks.
ProductDescription
PACKAGE OF THREE
#1077 Super Spray Adhesive is an extremely versatile industrial grade aerosol adhesive. Securely bonds most lightweight materials such as decorative foils, films and fabrics and fiberglass insulation.
Outstanding Features:
- Fine Mist Spray Pattern
- Strong one-surface bonds
- Fast, aggressive tack
Long bonding range
- 16 oz. net wt.aerosol can / 464 g
V&S #1077 Super Spray Industrial Grade Adhesive. The multipurpose formulation combines a uniform misting spray pattern with super high solids to create a fast tacking and high bond strength product capable of handling virtually any light or heavy duty job. Applications for this product can be found throughout general industry for bonding fabrics, plastics, felt, cork, foam, insulation, paper, corrugated, wood, most metals, and more. Even with the super high solids, this product has a conveniently open time to allow for repositioning and adjustment when affixing surfaces to be bonded. Also featured is a moderate flow rate spray valve to provide overspray control in a mist adhesive. The product has an economical coverage rate and is ideally suited for both temporary or permanent bonds. The one product that is truly all purpose, it is made without using chlorinated solvents, ozone depleters, or carcinogens.
Markets. This product is one of the most versatile adhesives available. Uses include general industry for temporary affixing templates or forms, permanent bonding labels or graphics, arts and crafts, screen-printing T-shirts, affixing materials during stitching or embroidery, upholstery/fabric tacking and temporary affixing of paper masking.
Instructions. Shake can well before using. Hold can 6" to 8" away from item and spray. Make bond while adhesive is still wet and tacky.
PERMANENT BONDS. For porous materials such as paper or cardboard, coat one surface only. Bonds should be made while adhesive is wet and tacky. For non-porous surfaces such as metal, foil, plastic, etc., coat both surfaces with adhesive. Allow at least one minute drying time before bonding.
NON-PERMANENT BONDS. Apply a light coat of adhesive to one surface. Allow at least 3 minutes drying time before bonding. Surface can then be separated when desired.
How to Use Spray Adhesives
Working with spray adhesive can be a trickymess. Here are some helpful tips and techniques from glueplace.com that willmake using spray adhesive easier, cleaner and enable you to get the most out ofthe product.
Spray adhesives are one of the most useful and versatile tools for homedecorating, crafting, construction and quick household fixes. It is easy touse, dries quickly and holds well.
Basic Directions
1. Useonly in a well-ventilated area. 2. Make sure surfaces are free of dirt,grease and moisture. 3. Shake can well before use. 4. If possible, mask off any area notapplied with adhesive (this will also help in clean-up). 5. Hold can uprightabout 6" to 8" away from surface. 6. Test spray pattern in a protected areaaway from project surfaces. 7. Spray with a light, uniform coat. 8. When can I make thebond? We suggest that you use your fingersif it feels sticky, but doesn't transfer to your fingers, it's ready to bond. 9. To help preventclogged nozzles after use, tip can upside down and spray until adhesive doesnot emit.
General Techniques
Use at room temperature. All adhesives work best at room temperature(60°-80°).
Keep steady.A light but thorough coating of spray adhesive works best and two coats aremuch better than one heavy coat.
Keep your distance.Hold the can upright about 6" to 8" from the surface while spraying.Spraying too closely can wet the surface and cause puddling, which can extenddrying times, weaken the bond, and affect the look of the finished project.
Protect from overspray.Just use a cardboard box, mask off surfaces with tape or paper, or cover thework surface with newspaper or other disposable material.
Save the nozzles.Nozzles on spray adhesives can get clogged. Soaking clogged nozzles inturpentine or mineral spirits to loosen the adhesive. Also, save good nozzlesfrom empty cans to use as replacements.
Avoid bubbles.A good way to help eliminate trapped bubbles when using spray adhesive to gluesurfaces is to apply pressure starting from the center of the materialand then carefully working outward.
Purge the can. Toextend the life of the can of spray adhesive, turn it upside down when theproject is complete. Spray into a safe location (like an empty box) until theglue stops coming out.
Adhesive Solutions, Inc. has established a reputation with our customers of providing fast, reliable, and professional service. The high level of responsiveness to our customers' needs – keep them coming back.
Item Specifics
Processing Time
- We process and ship orders Monday through Friday, excluding holidays.
- Most orders are processed within 1–3 business days, depending on product availability.
- Processing time does not include delivery time, which varies based on your location and the product’s shipping origin.
Shipping Coverage
We currently ship to addresses within the United States only.
Products may ship from:
- Our U.S. warehouses, or
- Our international fulfillment centers (including Korea, Japan, China, Australia, Mexico, Canada, the United Kingdom, and the EU).
Each product page clearly displays the “Ships From” location before checkout.
Shipping Methods & Estimated Delivery
| Shipping Method | Estimated Delivery | Cost |
|---|---|---|
| Free Shipping (US) | 5–10 business days | Free, available on eligible items |
| Standard Shipping (US to US by Item) | 5–10 business days | $6.50 for the first item, $2.00 each additional |
| Standard Shipping (From US Warehouse by Weight) | 3–7 business days | Starts at $6.50, increasing by $2 for every additional 4 oz (0.25 lb) up to 1 lb, then by $4 for each additional pound beyond 1 lb. |
| Extended Delivery (Ships from Overseas Warehouse) | 10–20 business days | $14.50 for the first item, $2.00 each additional |
Shipping costs vary by product weight, quantity and origin. Exact rates and delivery estimates are displayed on each product page and confirmed during checkout.
Free Shipping
We offer free standard shipping on select products or during promotional periods. Availability of free shipping will be displayed on the product page and at checkout.
Carriers
We primarily use USPS and UPS for U.S. deliveries. Items shipped from international warehouses may be handled by partner carriers depending on the country of origin.
Import Duties & Taxes
All import duties and taxes for goods imported into the United States are included in the product price. There are no hidden fees or additional charges at checkout.
Tracking & Notifications
Every order is fully trackable. You will receive a tracking number via email once your order ships. If your order ships in multiple packages, each package will have its own tracking number. If you don’t receive a shipping confirmation immediately, your order is still being processed and will arrive within the estimated timeframe shown at checkout.
You can track your shipment anytime using the Track Your Order page on our website.
Order Changes & Cancellations
If you need to modify or cancel an order, please contact our customer support team as soon as possible. Orders can only be canceled before they ship. Once shipped, cancellations are not possible, but you may request a return after the item is delivered.
Contact: support@ibspot.com
Item Not Received
If your tracking number shows “Delivered” but you haven’t received your package:
- Check with your local USPS or UPS office.
- Confirm that the shipping address provided was correct.
- If the issue remains unresolved, contact support@ibspot.com for assistance.
Damaged or Lost Parcels
If your package arrives damaged or fails to arrive, please contact us immediately. For deliveries to P.O. boxes, ibspot is not responsible for damage caused by weather, temperature, or theft.
Customer Support
For any questions about shipping, tracking, or delivery, our customer support team is here to help.
Email: support@ibspot.com
We’re always happy to help.
Please read our policy carefully before making a purchase.
We aim to ensure every customer has a smooth and transparent experience with ibspot.com.
Order Cancellation Policy
Customers may request to cancel an order before it has been shipped.
Once the package has been shipped, cancellations are no longer possible; however, you may still request a return after receiving your order.
How to Request a Cancellation
You can contact us through:
- Email: support@ibspot.com
- Contact Form: Submit a request through our Contact Us page
Please submit your cancellation request as soon as possible after placing the order to allow us to process it before shipment.
Return Policy
We accept returns for most items within 30 days of delivery for a full refund.
To be eligible for a return:
- The item must be unused, in the same condition as received, and in its original packaging.
- A tracking number must be provided to confirm the return shipment.
Non-Returnable Items
Certain products cannot be returned, including:
- Perishable goods (for example, food, flowers, newspapers, magazines)
- Intimate or sanitary goods
- Hazardous materials or flammable liquids/gases
- Gift cards
- Downloadable software
- Some health and personal care items
Partial Refunds (If Applicable)
Partial refunds may be granted in specific situations, such as:
- Books with obvious signs of use
- Opened CDs, DVDs, software, or vinyl records
- Items not in their original condition, damaged, or missing parts not due to our error
- Items returned more than 30 days after delivery
How to Return an Item
To initiate a return, please contact us at support@ibspot.com with your order number and details about the product you wish to return.
Our team will provide you with return instructions and a prepaid return label.
Shipping Cost for Returns
Please contact us before returning any item.
We will provide a free return shipping label.
If a return is sent back without prior contact or without our provided label, we cannot be held responsible for return shipping costs.
For items valued over $75, we recommend using a trackable shipping service or purchasing shipping insurance.
We cannot guarantee that we will receive your returned item if shipped independently.
Refund Processing
Once your return is received and inspected:
- In-store returns are refunded to the original form of payment or issued as a gift card.
- Mail-in returns using our prepaid label are refunded to the original payment method within 3–5 business days after we receive your return.
Please allow:
- 5–7 business days for the return to reach our Returns Center.
- An additional 3–10 business days for your bank to post the refund to your account.
Damages, Issues & Claims
Please inspect your order immediately upon receipt.
If you receive a defective, damaged, or incorrect item, contact us right away at support@ibspot.com.
We’ll evaluate the issue promptly and make it right.
Product Claims
Before purchasing, please review product details carefully.
If there is a problem with your order upon arrival, visit our Support Center or contact us directly to arrange return shipping or replacement.
Exchanges
We do not process direct exchanges.
The fastest way to get what you need is to return the original item and place a new order once your return is accepted.
Return Address
IBSPOT Return Center
15 Sawmill Ln
Dover Plains, NY 12522
United States
Customer Support
Our support team is available 24/7 to assist with cancellations, returns, or general inquiries.
Email: support@ibspot.com
Contact Form: Contact Us page
Oops!
Sorry, it looks like some products are not available in selected quantity.